Topic
  • 6 replies
  • Latest Post - ‏2013-03-16T16:30:31Z by Doky
SystemAdmin
SystemAdmin
3234 Posts

Pinned topic How make HS22 recognize USB flash from Chassis

‏2012-12-28T05:54:51Z |
Hi all,

after i run diagnostic DSA Preboot on Bladeserver HS22, i stick a usb flash with FAT32 format to Chassis however when i choose Save as, usb device did not appear. how can i make bladeserver HS22 recognize usb device to save log file.

Thank you very much :)
Updated on 2013-03-16T16:30:31Z at 2013-03-16T16:30:31Z by Doky
  • Novikov_Alexander
    Novikov_Alexander
    1147 Posts

    Re: How make HS22 recognize USB flash from Chassis

    ‏2012-12-29T10:52:36Z  
    Dear Khuong,

    looks like to compatibility issue. Try another USB flash.

    Regards,
    Alexander Novikov
    Russia, Moscow
  • Walad@MY
    Walad@MY
    3 Posts

    Re: How make HS22 recognize USB flash from Chassis

    ‏2013-03-14T14:45:51Z  
    Hi,
    Try resiting the media tray.

    Regards,
    Walad Kadri
    Kuala Lumpur, Malaysia
  • SystemAdmin
    SystemAdmin
    3234 Posts

    Re: How make HS22 recognize USB flash from Chassis

    ‏2013-03-14T22:11:47Z  
    • Walad@MY
    • ‏2013-03-14T14:45:51Z
    Hi,
    Try resiting the media tray.

    Regards,
    Walad Kadri
    Kuala Lumpur, Malaysia
    Did you assign the blade to be the media tray owner? If not, it will not function. Also, I've found USB drives like SanDisk do no work with some of my blades. Kingston has never failed me.
  • SystemAdmin
    SystemAdmin
    3234 Posts

    Re: How make HS22 recognize USB flash from Chassis

    ‏2013-03-15T11:24:23Z  
    Did you assign the blade to be the media tray owner? If not, it will not function. Also, I've found USB drives like SanDisk do no work with some of my blades. Kingston has never failed me.
    Hello, it is good practice to insert the USB key directly to AMM USB port, not to media tray. Use the KVM button on the blade of course.
    Tomas Petrzilka
  • SystemAdmin
    SystemAdmin
    3234 Posts

    Re: How make HS22 recognize USB flash from Chassis

    ‏2013-03-16T15:48:12Z  
    Have you tested the USB key on other Blades? Supported USB keys are a hit and miss affair. Some work some dont.
  • Doky
    Doky
    14 Posts

    Re: How make HS22 recognize USB flash from Chassis

    ‏2013-03-16T16:30:31Z  
    If it's a Bladecenter E chassis, then you have to revert USB to 1.1 in UEFI setup

    Doky...