Topic
2 replies Latest Post - ‏2012-12-18T09:21:45Z by SystemAdmin
SystemAdmin
SystemAdmin
6908 Posts
ACCEPTED ANSWER

Pinned topic Missing memory

‏2012-12-12T13:38:09Z |
Hi all,
that's my first time writing here.

I have a problem here with our 9117-570 running AIX 6.1. We use it to test memory modules and processor cards. Sometimes when i put memory into the machine AIX recognizes only half of the size (bootinfo -r). For example, i put in 4x 4GB and AIX shows me 8GB. But the memory is not shown as deconfigured in the system management !?
But that's not with all memory modules, it seemes to affect only some FRUs. On Other FRUs with the same size all works fine. Can anyone tell me a possible reason for this ?
Updated on 2012-12-18T09:21:45Z at 2012-12-18T09:21:45Z by SystemAdmin
  • dukessd
    dukessd
    337 Posts
    ACCEPTED ANSWER

    Re: Missing memory

    ‏2012-12-18T00:44:36Z  in response to SystemAdmin
    You probably don't have a COD / MOD code for the memory only showing half:
    http://www-912.ibm.com/pod/pod
    • SystemAdmin
      SystemAdmin
      6908 Posts
      ACCEPTED ANSWER

      Re: Missing memory

      ‏2012-12-18T09:21:45Z  in response to dukessd
      Ah, ok. I suspected something like this. But i think this affects only the size of the memory and not the part numbers of the memory modules !? The strange thing is i dont have this problem with all part numbers. And if i dont have a MOD, what does that say to me ? The machine is only running local with AIX without network connection or any server application on it.