Topic
1 reply Latest Post - ‏2012-12-08T12:32:39Z by karl.h
TMasteen
TMasteen
279 Posts
ACCEPTED ANSWER

Pinned topic Q: SVC iSCSI with multiple vlans

‏2012-12-07T21:36:04Z |
Hi all,

When I have a 2 Node SVC cluster with 2x 1Gb ports and 2x 10Gb ports per node, can I configure 2 different iSCSI VLans on these ports?
For example eth0 (each Node) for vlan 11 and eth1 (each node) for vlan 21?

Thanks.
Updated on 2012-12-08T12:32:39Z at 2012-12-08T12:32:39Z by karl.h
  • karl.h
    karl.h
    64 Posts
    ACCEPTED ANSWER

    Re: Q: SVC iSCSI with multiple vlans

    ‏2012-12-08T12:32:39Z  in response to TMasteen
    You should be able to do this. However there is NO VLAN tagging with iSCSI in SVC. So you need to configure this on your Ethernet Switch so that all the traffic is going to the correct VLANs.