Topic
2 replies Latest Post - ‏2012-12-13T23:27:55Z by Tulein
SystemAdmin
SystemAdmin
4779 Posts
ACCEPTED ANSWER

Pinned topic Can't connect to DS4800 with Storage Manager Client

‏2012-12-03T16:45:25Z |
Hi,

I've moved a ds4800. I'm trying to connect with DSM Client with no success. Refering to the manual I've created two reservation using MAC address in our DHCP but ip aren't release. At this point I've tried to connect to default ip addresses, with no success too.
I'm suspecting the old ip configuration is still present and I've no notice about it. Is there any way to reset the network configuration to default?

Thank you.
Updated on 2012-12-13T23:27:55Z at 2012-12-13T23:27:55Z by Tulein
  • Berniebgbb
    Berniebgbb
    83 Posts
    ACCEPTED ANSWER

    Re: Can't connect to DS4800 with Storage Manager Client

    ‏2012-12-05T05:30:00Z  in response to SystemAdmin
    Hi There,

    Not sure about resetting the network off the top of my head, however if you have access control still defined for a physical server you could manage it via "Inband" (through the fibre) and reset the network address that way...

    Bernie.
  • Tulein
    Tulein
    33 Posts
    ACCEPTED ANSWER

    Re: Can't connect to DS4800 with Storage Manager Client

    ‏2012-12-13T23:27:55Z  in response to SystemAdmin
    You can reset the IP address via a serial connection to the DS with this command:
    netCfgSet

    Hope this helps