Topic
  • 2 replies
  • Latest Post - ‏2012-11-30T19:19:23Z by crusin
crusin
crusin
2 Posts

Pinned topic CANNOT CLEAR THE LOG LED X3850

‏2012-11-28T17:56:25Z |
So far we have cleared the BMC and system-event logs, pwr reset. Note no LIGHT PATH leds are lit.
We just have the LOG LED lit? Bizar, there does not seem to be any errors or anything to point at the cause.

Could it be that we also have to clear the IPMI log?
They are running ESXi OS.
Updated on 2012-11-30T19:19:23Z at 2012-11-30T19:19:23Z by crusin
  • Novikov_Alexander
    Novikov_Alexander
    6865 Posts

    Re: CANNOT CLEAR THE LOG LED X3850

    ‏2012-11-29T19:42:30Z  
    Dear Keary,

    lest check DSA log (use DSA Preboot Edition tool).

    Regards,
    Alexander Novikov
    Russia, Moscow
  • crusin
    crusin
    2 Posts

    Re: CANNOT CLEAR THE LOG LED X3850

    ‏2012-11-30T19:19:23Z  
    Thank You for the DSA preboot advice: We also had them update the DSA utility and we checked again the output. They are getting PCI errors that we suspect are the culprit.
    So we will have to wait for a Maintenance Window to narrow this problem.