Topic
  • 1 reply
  • Latest Post - ‏2012-12-05T13:37:12Z by null
kykwon
kykwon
5 Posts

Pinned topic errpt Label : ELXENT_MBX_ERR

‏2012-11-26T00:58:28Z |
Dear all
Os version : 6100-07-04-1216
our system has been occurred a message as below
and is there any problem the server?

1.errpt -a
LABEL: ELXENT_MBX_ERR
IDENTIFIER: C34E2754

Date/Time: Sun Nov 25 09:31:46 KST 2012
Sequence Number: 519
Machine Id: 00C25B674C00
Node Id: sssss
Class: H
Type: PERM
WPAR: Global
Resource Name: ent5
Resource Class: adapter
Resource Type: a2191007d203000
Location: U78C0.001.DBJ2062-P2-C8-T4

VPD:
Int Multifunction Card w/ Base-TX 10/100/1000 1GbE:
Network Address.............6CAE8B440253
ROM Level.(alterable).......0400003260003

Description
ADAPTER ERROR

Recommended Actions
PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
FILE NAME
line: 451 file: elxent_prim.c
PCI ETHERNET STATISTICS
0017 5DE8 0061 0953 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 5555 5555
0000 1D00 0000 0200 6CAE 8B44 0253 0000
DEVICE DRIVER INTERNAL STATE

2. entstat -d en5
ETHERNET STATISTICS (en5) :
Device Type: Int Multifunction Card w/ Base-TX 10/100/1000 1GbE Adapter
Hardware Address: 6c:ae:8b:44:02:53
Elapsed Time: 0 days 0 hours 0 minutes 0 seconds

Transmit Statistics: Receive Statistics:


Packets: 0 Packets: 0
Bytes: 0 Bytes: 0
Interrupts: 0 Interrupts: 0
Transmit Errors: 0 Receive Errors: 0
Packets Dropped: 0 Packets Dropped: 0
Bad Packets: 0
Max Packets on S/W Transmit Queue: 0
S/W Transmit Queue Overflow: 0
Current S/W+H/W Transmit Queue Length: 0

Broadcast Packets: 0 Broadcast Packets: 0
Multicast Packets: 0 Multicast Packets: 0
No Carrier Sense: 0 CRC Errors: 0
DMA Underrun: 0 DMA Overrun: 0
Lost CTS Errors: 0 Alignment Errors: 0
Max Collision Errors: 0 No Resource Errors: 0
Late Collision Errors: 0 Receive Collision Errors: 0
Deferred: 0 Packet Too Short Errors: 0
SQE Test: 0 Packet Too Long Errors: 0
Timeout Errors: 0 Packets Discarded by Adapter: 0
Single Collision Count: 0 Receiver Start Count: 0
Multiple Collision Count: 0
Current HW Transmit Queue Length: 0

General Statistics:

No mbuf Errors: 0
Adapter Reset Count: 0
Adapter Data Rate: 0
Driver Flags: Up Broadcast Simplex
Limbo 64BitSupport ChecksumOffload
LargeSend DataRateSet

Int Multifunction Card w/ Base-TX 10/100/1000 1GbE Adapter (a21910071410d203) Specific Statistics:

Link Status: Down
Reason: Unknown
Media Speed Selected: Auto negotiation
Media Speed Running: Unknown
PCI Mode: PCI-Express X8
Relaxed Ordering: Disabled
TLP Size: 512
MRR Size: 4096
PCIe Link Speed: 5.0 Gbps
Firmware Operating Mode: Native
Jumbo Frames: Disabled
Transmit TCP segmentation offload: Enabled
Receive TCP segment aggregation: Enabled
Transmit and receive flow control status: Enabled
Number of XOFF packets transmitted: 0
Number of XON packets transmitted: 0
Number of XOFF packets received: 0
Number of XON packets received: 0
Receive statistics for RXQ number: 0
Number of receive interrupts: 0
Number of receive packets: 0
Number of receive bytes: 0
Number of receive packet drops: 0
Number of RX mbufs allocated from system pool: 0
Number of system pool RX mbuf allocation failures: 0
Number of empty EQ events: 0
Number of no fragment errors: 0
Number of rx_limit events: 0
TCP segment aggregation large packets created: 0
TCP packets aggregated into large packets: 0
TCP payload bytes aggregated into large packets: 0
TCP segment aggregation average packets aggregated: 1
TCP segment aggregation maximum packets aggregated: 0
Transmit statistics for TXQ number: 0
Number of transmit packets: 0
Number of transmit bytes: 0
Number of transmit packet drops: 0
Number of transmit queue overflows: 0
TCP segmentation offload packets transmitted: 0
TCP segmentation offload maximum packet size: 0
Maximum entries used on this transmit queue: 0
Updated on 2012-12-05T13:37:12Z at 2012-12-05T13:37:12Z by null
  • null
    null
    1 Post

    Re: errpt Label : ELXENT_MBX_ERR

    ‏2012-12-05T13:37:12Z  
    Did you ever get this resolved? We have run into this issue (or similiar) on 6 different 9117-MMDs. It appears to be specific to some interaction between A/P Etherchannels (no LACP) and the Integrated Multifunction Card -- possibly related to how the device driver handles ARPs. We currently have a PMR open and are waiting for an iFix.