Topic
IC4NOTICE: developerWorks Community will be offline May 29-30, 2015 while we upgrade to the latest version of IBM Connections. For more information, read our upgrade FAQ.
8 replies Latest Post - ‏2012-11-30T08:24:19Z by SystemAdmin
SystemAdmin
SystemAdmin
849 Posts
ACCEPTED ANSWER

Pinned topic Issues in scanning assembler program

‏2012-11-09T10:49:02Z |
Hi,

We are using RAA version: v 6.0.0 on Windows.

We scanned a sample assembler program.
a. Without file extension, this was identified as 'PL/1- included source.'
b. With extension, this is identified as 'Assembler - included source' (not as 'Program source')

Attached is the source code.
Error code: DMH1852E
On mainframe, we were able to compile this successfully though.

Can you help to resolve this?
Updated on 2012-11-30T08:24:19Z at 2012-11-30T08:24:19Z by SystemAdmin
  • jcdelmo
    jcdelmo
    343 Posts
    ACCEPTED ANSWER

    Re: Issues in scanning assembler program

    ‏2012-11-12T21:23:16Z  in response to SystemAdmin
    I see three issues in your post:

    1) The file without extension being identified as PL/1 (should be Assembler)
    2) The file with extension being identified as an include (should be program)
    3) The DMH1852E: Cannot find an EntryPoint for <name> error message

    Is that correct?
    • SystemAdmin
      SystemAdmin
      849 Posts
      ACCEPTED ANSWER

      Re: Issues in scanning assembler program

      ‏2012-11-14T08:40:40Z  in response to jcdelmo
      yes, correct.
    • SystemAdmin
      SystemAdmin
      849 Posts
      ACCEPTED ANSWER

      Re: Issues in scanning assembler program

      ‏2012-11-20T09:22:24Z  in response to jcdelmo
      Hi jcdelmo - Do you happen to have any directions for this issue?
      • jcdelmo
        jcdelmo
        343 Posts
        ACCEPTED ANSWER

        Re: Issues in scanning assembler program

        ‏2012-11-20T21:21:37Z  in response to SystemAdmin
        1) RAA development team will open a work item to address this, in the meantime you can change the languageCd via the User Interface.
        2) RAA development team will open a work item to address this.
        3) The RAA workstation product does not analyzer Assembler source (as the input to the analysis is the SYSADATA file out of the assembler translater). The assembler files have to be analyzed on z/OS and the import file created downloaded to the workstation for import into RAA. The install documentation describes how to setup RAA on the workstation to request remote assemblies and downloads of the results for importing. If you have any issues with the instructions, contact Level 2 support.
        • SystemAdmin
          SystemAdmin
          849 Posts
          ACCEPTED ANSWER

          Re: Issues in scanning assembler program

          ‏2012-11-21T08:32:41Z  in response to jcdelmo
          1) Change language \ type for this element is not possible. This is ignored, when tried. (ERROR: DMH5368W)
          Thank you for clarifying the rest.