Topic
3 replies Latest Post - ‏2012-11-21T00:40:12Z by karl.h
SystemAdmin
SystemAdmin
4779 Posts
ACCEPTED ANSWER

Pinned topic Enhanced Remote Mirroring

‏2012-11-08T06:26:53Z |
How can i configure ERM between two ds5020 storage using tcpip link between DC and DR
Updated on 2012-11-21T00:40:12Z at 2012-11-21T00:40:12Z by karl.h
  • karl.h
    karl.h
    64 Posts
    ACCEPTED ANSWER

    Re: Enhanced Remote Mirroring

    ‏2012-11-18T22:56:28Z  in response to SystemAdmin
    There is no way to do this with native DS5020. You need to use FCIP routers to get this to work.
  • SystemAdmin
    SystemAdmin
    4779 Posts
    ACCEPTED ANSWER

    Re: Enhanced Remote Mirroring

    ‏2012-11-20T09:00:52Z  in response to SystemAdmin
    In SAN switch we can configure zoning for the ERM but how to do this in FCIP switch.If you have any documents for the configuration please share.

    Thanks
    • karl.h
      karl.h
      64 Posts
      ACCEPTED ANSWER

      Re: Enhanced Remote Mirroring

      ‏2012-11-21T00:40:12Z  in response to SystemAdmin
      One way to do it is to setup LSANs on your SAN infrastructure. This will more or less map a port from one Fabric to another Fabric without merging the Fabrics. You may want to check the Brocade documentation for more information on this topic. A good starting point would be the Brocade FabOS Admin Guide.