Topic
  • 2 replies
  • Latest Post - ‏2013-03-15T08:43:25Z by gb12345
gb12345
gb12345
34 Posts

Pinned topic RDZ does not start up

‏2012-10-11T10:23:54Z |
Hello,

On some PCs with Windows XP the RDz (RDz 8.5.0.1) does not start up.
Always an error log is written (see attached file) with errors like:

!ENTRY org.eclipse.equinox.ds 2 0 2012-10-10 14:12:01.871
!MESSAGE SCR - WorkThread Timeout occurred! Thread was blocked on processing QueuedJob WorkPerformer: org.eclipse.equinox.internal.ds.SCRManager@5d34bb7c; actionType 1

!ENTRY org.eclipse.equinox.ds 2 0 2012-10-10 14:12:01.871
!MESSAGE SCR Enabling components of bundle com.ibm.support.feedback.ui did not complete in 30000 ms

Need help.

Georg
Updated on 2013-03-15T08:43:25Z at 2013-03-15T08:43:25Z by gb12345
  • SystemAdmin
    SystemAdmin
    1086 Posts

    Re: RDZ does not start up

    ‏2013-03-13T11:51:03Z  
    We have similar issue with RSART851 in headless mode:
    !ENTRY org.eclipse.equinox.ds 2 0 2013-03-13 04:12:44.046
    !MESSAGE SCR - WorkThread Timeout occurred! Thread was blocked on processing QueuedJob WorkPerformer: org.eclipse.equinox.internal.ds.SCRManager@e1f504fe; actionType 1

    !ENTRY org.eclipse.equinox.ds 2 0 2013-03-13 04:12:44.047
    !MESSAGE SCR Enabling components of bundle com.ibm.support.feedback.ui did not complete in 30000 ms

    we tried:
    -Dequinox.ds.block_timeout=300000\ -Dequinox.statechange.timeout=300000

    do you have another solution ?
  • gb12345
    gb12345
    34 Posts

    Re: RDZ does not start up

    ‏2013-03-15T08:43:25Z  
    We got this problem, when we have installed RDz with RAD.
    Since we have deinstalled RAD, we have no startup problems.