Topic
  • 6 replies
  • Latest Post - ‏2012-10-07T09:33:33Z by Novikov_Alexander
Kamel2012
Kamel2012
6 Posts

Pinned topic 062 Three consecutive boot failures

‏2012-09-30T09:10:19Z |
Hello
i've HS12, and this morning there is this error: 0x10000002
POSTBIOS: 062 Three consecutive boot failures. Using default CMOS config.
how to do to fixe this prblm
thank's for help
Updated on 2012-10-07T09:33:33Z at 2012-10-07T09:33:33Z by Novikov_Alexander
  • Novikov_Alexander
    Novikov_Alexander
    1147 Posts

    Re: 062 Three consecutive boot failures

    ‏2012-10-01T03:45:15Z  
    Dear KAMEL,

    could you provide DSA log of this HS12.

    Regards,
    Alexander Novikov
    Russia, Moscow
  • Kamel2012
    Kamel2012
    6 Posts

    Re: 062 Three consecutive boot failures

    ‏2012-10-01T07:42:44Z  
    Dear KAMEL,

    could you provide DSA log of this HS12.

    Regards,
    Alexander Novikov
    Russia, Moscow
    When i start server i can't use any of option F1, F2, or F12.
    when I press one of these keys, the following message appears:F1/F2/F12 has-been pressed
    Thanks Novikov,
  • Novikov_Alexander
    Novikov_Alexander
    1147 Posts

    Re: 062 Three consecutive boot failures

    ‏2012-10-01T16:51:19Z  
    • Kamel2012
    • ‏2012-10-01T07:42:44Z
    When i start server i can't use any of option F1, F2, or F12.
    when I press one of these keys, the following message appears:F1/F2/F12 has-been pressed
    Thanks Novikov,
    Hi KAMEL,

    could you provide AMM Service Data of your BladeCenter.

    Regards,
    Alexander Novikov
    Russia, Moscow
  • Kamel2012
    Kamel2012
    6 Posts

    Re: 062 Three consecutive boot failures

    ‏2012-10-04T09:27:31Z  
    Hi KAMEL,

    could you provide AMM Service Data of your BladeCenter.

    Regards,
    Alexander Novikov
    Russia, Moscow
    sorry for being late

    Best Regards
  • Kamel2012
    Kamel2012
    6 Posts

    Re: 062 Three consecutive boot failures

    ‏2012-10-04T10:07:26Z  
    • Kamel2012
    • ‏2012-10-04T09:27:31Z
    sorry for being late

    Best Regards
    Hello
    I send you, AMM without taking into account the blade that has the problem, the supplier he recuperated it (because she is under warranty).
    just for information :
    this is the second blade had problem, solution : the supplier change motherboard
    Thank you for your precious time.
  • Novikov_Alexander
    Novikov_Alexander
    1147 Posts

    Re: 062 Three consecutive boot failures

    ‏2012-10-07T09:33:33Z  
    • Kamel2012
    • ‏2012-10-04T10:07:26Z
    Hello
    I send you, AMM without taking into account the blade that has the problem, the supplier he recuperated it (because she is under warranty).
    just for information :
    this is the second blade had problem, solution : the supplier change motherboard
    Thank you for your precious time.
    Hi KAMEL,

    as we can see in your logs there is LSI Logic PCI-Express Fusion-MPT SAS card problem.

    (S-SCD)SMI Hdlr: 00150400 SERR: Device Signaled SERR B/D/F/Slot=02000000 Vend=1000 Dev=0056 Status=4010
    (S-SCD)PCI system error

    You need try this:

    • Reseat the SAS storage interface card FRU 49Y4457;
    • remove/replace SAS card;
    • replace system board.

    Regards,
    Alexander Novikov
    Russia, Moscow