Topic
  • 7 replies
  • Latest Post - ‏2012-09-28T07:48:55Z by Matu_Agarwal
sunilsure
sunilsure
19 Posts

Pinned topic SAP connector error

‏2012-09-26T14:20:28Z |
Hello All,
I have uploaded sapjco3.jar, sapidoc3.jar and sapjco3.dll files into CastIron Studio 6.1.0.0 in my windows system. When I am trying to connect with SAP system I am facing an error like "SAP DLL files are not found. Detail: com.sap.conn.jco.JCo(initialization failure)". Can any one figure out the problem. Thanks in advance.
Thanks,
Sunil Sure.
Updated on 2012-09-28T07:48:55Z at 2012-09-28T07:48:55Z by Matu_Agarwal
  • SystemAdmin
    SystemAdmin
    1250 Posts

    Re: SAP connector error

    ‏2012-09-26T14:46:58Z  
    Hi,
    Any reason why you would want to use 6.1.0.0? I don't recall having problems when using 6.1.0.3, nor even now with 6.1.0.9.
    Which OS on your host are you running?

    Regards,
    Magali
  • Matu_Agarwal
    Matu_Agarwal
    2 Posts

    Re: SAP connector error

    ‏2012-09-26T15:15:47Z  
    It may not work in either of these case:
    1 - Check if ur env JRE version is compatible with SAP JCo one including the bits -32 bit / 64 bit.It has to be same

    2 - If dll file is not getting installed on the Windows OS, you may need to install a Microsoft Visual C Service Pack similar to for JCo 3.0.4 -
    http://www.microsoft.com/en-us/download/details.aspx?id=14431
    Check on SAP JCo documentation to find the right level of Service Pack for your JCo dll.

    regards
    matu
  • sunilsure
    sunilsure
    19 Posts

    Re: SAP connector error

    ‏2012-09-26T17:09:39Z  
    Hi,
    Any reason why you would want to use 6.1.0.0? I don't recall having problems when using 6.1.0.3, nor even now with 6.1.0.9.
    Which OS on your host are you running?

    Regards,
    Magali
    Thanks for reply...
    My XH40 appliance is shipped with studio 6.1.0.0. I am using windows XP with SP2. Could you please help me.

    Thanks,
    Sunil Sure
  • sunilsure
    sunilsure
    19 Posts

    Re: SAP connector error

    ‏2012-09-26T21:16:32Z  
    It may not work in either of these case:
    1 - Check if ur env JRE version is compatible with SAP JCo one including the bits -32 bit / 64 bit.It has to be same

    2 - If dll file is not getting installed on the Windows OS, you may need to install a Microsoft Visual C Service Pack similar to for JCo 3.0.4 -
    http://www.microsoft.com/en-us/download/details.aspx?id=14431
    Check on SAP JCo documentation to find the right level of Service Pack for your JCo dll.

    regards
    matu
    Thanks for reply...
    Currently I am using Windows XP with SP2 and I am using the files like sapjco30P_9-10005324(sapjco3.jar and sapjco3.dll) and sapjidoc30P_7-10009485(sapidoc3.jar). Some how my colleague has installed the same Studio version with above files and able to connect with SAP. Could you please help me.

    Thanks,
    Sunil Sure
  • SystemAdmin
    SystemAdmin
    1250 Posts

    Re: SAP connector error

    ‏2012-09-27T07:08:04Z  
    • sunilsure
    • ‏2012-09-26T21:16:32Z
    Thanks for reply...
    Currently I am using Windows XP with SP2 and I am using the files like sapjco30P_9-10005324(sapjco3.jar and sapjco3.dll) and sapjidoc30P_7-10009485(sapidoc3.jar). Some how my colleague has installed the same Studio version with above files and able to connect with SAP. Could you please help me.

    Thanks,
    Sunil Sure
    Well, my question was related to Cast Iron Studio. Which version did you install? Not sure it'll change much, but you may want to try out the latest (6.1.0.9).

    Regards,
    Magali
  • sunilsure
    sunilsure
    19 Posts

    Re: SAP connector error

    ‏2012-09-27T18:43:18Z  
    Well, my question was related to Cast Iron Studio. Which version did you install? Not sure it'll change much, but you may want to try out the latest (6.1.0.9).

    Regards,
    Magali
    Thanks Magali,
    I have installed CastIron Studio 6.1.0.9 in my Windows XP with SP2 and added sapjco3.jar, sapjco3.dll and sapido3.jar file and I am trying to connect with SAP, again it is showing the error like "Unable to Connect: Required SAP JCO native library is not found. Install version 3.x SAP JCO native library(.dll or .so based on platform). Detail: Error getting the version of the native layer: java.lang.UnsatisfiedLinkError: sapjco3 (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. )". Can you please help me.
    Thanks,
    Sunil Sure
  • Matu_Agarwal
    Matu_Agarwal
    2 Posts

    Re: SAP connector error

    ‏2012-09-28T07:48:55Z  
    • sunilsure
    • ‏2012-09-27T18:43:18Z
    Thanks Magali,
    I have installed CastIron Studio 6.1.0.9 in my Windows XP with SP2 and added sapjco3.jar, sapjco3.dll and sapido3.jar file and I am trying to connect with SAP, again it is showing the error like "Unable to Connect: Required SAP JCO native library is not found. Install version 3.x SAP JCO native library(.dll or .so based on platform). Detail: Error getting the version of the native layer: java.lang.UnsatisfiedLinkError: sapjco3 (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. )". Can you please help me.
    Thanks,
    Sunil Sure
    Hi Sunil

    Did you tried installing the Micorsoft service pack
    http://www.microsoft.com/en-us/download/details.aspx?id=14431