Topic
  • 3 replies
  • Latest Post - ‏2012-09-12T12:12:06Z by SystemAdmin
PhilZhao
PhilZhao
2 Posts

Pinned topic [Solved] got issue when run wl on liberty

‏2012-09-11T09:28:10Z |
Hi,

I installed WL Enterprise edition and Liberty server through IM. The liberty server is up and running, the issue is when I try access the deployed app in the console(preview common resource), below strange log keep showing up and I can not proceed further

WARNING WARNING: Cannot set status. Response already committed.
WARNING WARNING: Cannot set status. Response already committed.
WARNING WARNING: Cannot set status. Response already committed.
WARNING WARNING: Cannot set status. Response already committed.
WARNING WARNING: Cannot set status. Response already committed.

Attached is the console log, just wondering anyone may help take a look, Thanks in advance.

Cheers,
Phil
  • PhilZhao
    PhilZhao
    2 Posts

    Re: got issue when run wl on liberty

    ‏2012-09-12T08:02:05Z  
    It turns out i installed the latest fix pack 5.0.0.3, in this new release, the authentication module in worklight is changed, which breaks my app.
    after I restore my previous wl server version, my app works fine.

    Cheers,
    Phil
  • IdanAdar
    IdanAdar
    49 Posts

    Re: got issue when run wl on liberty

    ‏2012-09-12T08:03:46Z  
    The more appropriate thing to do is to understand why your app breaks after the automatic upgrade made between 5.0.0.2 to 5.0.0.3 (due to the authentication changes).
    If you'd like help with that, you may ask questions and tell us where it breaks for you, etc.

    Good luck.

    Idan Adar
    QA Engineer
    IBM Worklight Mobile Platform
  • SystemAdmin
    SystemAdmin
    300 Posts

    Re: got issue when run wl on liberty

    ‏2012-09-12T12:12:06Z  
    • PhilZhao
    • ‏2012-09-12T08:02:05Z
    It turns out i installed the latest fix pack 5.0.0.3, in this new release, the authentication module in worklight is changed, which breaks my app.
    after I restore my previous wl server version, my app works fine.

    Cheers,
    Phil
    Phil,

    Also be sure both your studio and server components are at the same level (5.0.0.3) and review the 5.0.0.3 authentication changes, if you haven't already. Reading through that technote usually helps folks who get stuck on the migration.

    Barbara Hampson, Manager, IBM Worklight