We face an issue adding the raid controller subsystem under scm 2.20.0
We Get : GWMSB2057E Failed to add SAS RAID Module due to unavailable RAID Subsystem.
We can ping the SAS switches , but not the raid controller network interface which is on vlan 4095.
The AMM ver is BPET62S.
Any ideas what's wrong ?
This topic has been locked.
6 replies Latest Post - 2013-04-18T05:25:10Z by C8PG_CH_Lin
Pinned topic Bladecenter S - GWMSB2057E Failed to add SAS RAID Module due to unavailable
Answered question This question has been answered.
Unanswered question This question has not been answered yet.
Updated on 2013-01-30T23:09:47Z at 2013-01-30T23:09:47Z by SystemAdmin
pd21707 270003NVFA1 Post
Re: Bladecenter S - GWMSB2057E Failed to add SAS RAID Module due to unavailable2013-01-30T19:23:50Z in response to pd21707Having the same issue over here.
SCM version: 2.2
SCM installed on: WinXP x64
SAS raid module firmware: v1.2.4.011
AMM Build ID: BPET54L
All components are pingable.
All IO slot gateways set to AMM IP.
Re: Bladecenter S - GWMSB2057E Failed to add SAS RAID Module due to unavailable2013-01-30T20:07:28Z in response to SystemAdminFYI,
There was a conflict running IBM Director and SCM on the same machine; once I installed SCM on a different box it connected to the module fine.
C8PG_CH_Lin 270001C8PG3 Posts