Topic
1 reply Latest Post - ‏2012-08-20T17:00:17Z by SystemAdmin
SystemAdmin
SystemAdmin
847 Posts
ACCEPTED ANSWER

Pinned topic nco_m_bridge is not starting

‏2012-08-16T23:53:52Z |
Hello

I've been using ITCAM for transactions with ISM agent, and recently I notice that when i stopped and restarted the IS agents, the databridge don't starts with the rest.

I tried with the command:
/opt/IBM/ITM/bin/itmcmd agent start is

or with the

/opt/IBM/ITM/bin/itmcmd manage
and when I look for the proccesses, all of them are running, except for the bridge and I have nothing on the logs...

root@itcam bin# ps ax | grep nco
28393 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_pop3
28411 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_icmp
28439 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_tftp
28477 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_saa
28505 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_ntp
28523 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_ldap
28541 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_http
28559 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_ftp
28577 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_imap4
28595 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_https
28613 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_smtp
28631 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_sip
28650 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_tcpport
28668 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_rtsp
28686 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_rping
28704 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_transx
28722 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_soap
28740 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_snmp
28758 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_radius
28776 pts/8 Sl 0:00 /opt/IBM/ITM/lx8263/is/platform/linux2x86/bin/nco_m_nntp
The weird part is that if I start the bridge process manually, I don't get any problems.

/opt/IBM/ITM/lx8263/is/bin/nco_m_bridge &

Any thoughts?

Best regards
Updated on 2012-08-20T17:00:17Z at 2012-08-20T17:00:17Z by SystemAdmin
  • SystemAdmin
    SystemAdmin
    847 Posts
    ACCEPTED ANSWER

    Re: nco_m_bridge is not starting

    ‏2012-08-20T17:00:17Z  in response to SystemAdmin
    Hello

    It turns out that I had the KIS_Bridge_Inactive situation disabled in the TEPs, once I asigned to the agent, the problem was solved.

    Thank you!