Topic
  • 2 replies
  • Latest Post - ‏2013-07-19T14:18:17Z by 49PR_Kadir_Evciler
abzManc
abzManc
1 Post

Pinned topic Connecting to Datastage Server from DS Designer/Admin Client in a VLAN

‏2012-07-11T07:23:12Z |
Hi all,

We have installed InfoSphere Datastage 8.7 on our Linux server, and are now trying to connect from the windows client, but as we have implemented a VLAN on the server side, our admin has setup port forwarding on port 9080, so that I am able to connect from the client. However the message I am getting when connecting is as follows:

The URL iiop://vm-xx-xxx-xx-xx:2809 that is used to connect to the host http://xx.xx.xx.xxx on the port xxxxx is incorrect or is not trusted. To trust the connection, import the signer certificate into the local truststore, by running the following UpdateSignerCerts command: UpdateSignerCerts{.sh|.bat} -host xx.xx.xx.xxx -port xxxxx

Exception type: com/ascential/acs/security/auth/JNDILoginException
Exception message: The URL iiop://vm-xx-xxx-xx-xx:2809 that is used to connect to the host http://xx.xx.xx.xxx on the port xxxxx is incorrect or is not trusted. To trust the connection, import the signer certificate into the local truststore, by running the following UpdateSignerCerts command: UpdateSignerCerts{.sh|.bat} -host xx.xx.xx.xxx -port xxxxx

I have also tried running the UpdateSignerCerts scripts on both server and client side but failed. On the server side there is a timeout error, on a client side (not convinced this needs to be run though as we are not using SSL)

The following error is returned from an exception: ADMC0017E: Could not create an RMI connector to connect to host vm-xx-xxx-xx-xx at port 2809

I am wondering, does anything need to be done to port 2809? Ie does that need to be forwarded too also somehow?

According to the documentation below there are a number of other ports that are needed for the client to access the server, does that mean we would also need to open up these ports via port forwarding?

http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r7/index.jsp?topic=%2Fcom.ibm.swg.im.iis.productization.iisinfsv.install.doc%2Ftopics%2Fwsisinst_pln_networks.html

Any help on how to progress would be much appreciated!
Updated on 2012-07-12T09:54:39Z at 2012-07-12T09:54:39Z by RobertDickson
  • RobertDickson
    RobertDickson
    33 Posts

    Re: Connecting to Datastage Server from DS Designer/Admin Client in a VLAN

    ‏2012-07-12T09:54:39Z  
    Hi,

    You can try forwarding that port, too. However, you should probably open a ticket with your support provider to get some assistance.
  • 49PR_Kadir_Evciler
    49PR_Kadir_Evciler
    1 Post

    Re: Connecting to Datastage Server from DS Designer/Admin Client in a VLAN

    ‏2013-07-19T14:18:17Z  

    Hi,

    I have just faced this issue. If you fixed could you share the solutions?

     

    Regards.