Topic
17 replies Latest Post - ‏2012-10-16T08:05:05Z by pi314
pi314
pi314
13 Posts
ACCEPTED ANSWER

Pinned topic Is it possible to deploy DB2 instance?

‏2012-06-29T04:26:51Z |
Hello.

This is an information of my SCAWS beta 3 instance:
Data Center: Raleigh, USA
Service: IBM SCAWS v1.0 Beta3
Service ID: 2615
Storage ID: N/A
Server ID: 252514
Server IP: (I can tell you, if needed)
Status: Active

Now I can design Virtual System Pattern in my IWD.
When I tried to create and deploy single WAS server VM in my pattern with my simple WAR file and shell script, it succeeded to deploy as instance. Now I can access to that app server with my browser.

But when I tried to create single DB2 server VM(with no script) in my pattern, it always failed to deploy as instances, with message "Virtual machine could not be registered".

Maybe this would be same reason, but when I tried to create WAS and DB2 combined pattern, it always failed to deploy as instance too.
I embedded two screen shot images: one is for pattern design, and another one is deployed( and failed ) instances.

I wonder if this DB2 Express-C VM image could be correct one or not..
Is it possible to deploy DB2 instance? Anybody succeeded?

Thanks for advance. Regards.
Updated on 2012-10-16T08:05:05Z at 2012-10-16T08:05:05Z by pi314
  • morganri
    morganri
    109 Posts
    ACCEPTED ANSWER

    Re: Is it possible to deploy DB2 instance?

    ‏2012-06-29T16:01:07Z  in response to pi314
    Hi pi314,

    Do you have any instance created at all listed in the " instance tab" related to the "SCAS instance" you created?
    If so it would be good to see those logs. I know DB2 instances have been deployed.

    //Rich
    • pi314
      pi314
      13 Posts
      ACCEPTED ANSWER

      Re: Is it possible to deploy DB2 instance?

      ‏2012-06-30T02:49:48Z  in response to morganri
      Rich.

      I embedded new 2 screen shot images in this reply.

      From IBM SmartCloud Control Panel(scaws_db2_3.png), I see 2 service instances are running now. But on the other hand, information message says I am currently using 3 instances..

      And from Instance tab of my IWD(scaws_db2_4.png), I see one("HelloWorld") WAS instance is running correctly, and other 2 instances are failed. But one of them("MySampleApp") also show me that WAS part is running and DB2 part is failed.

      So I guess thatIBM SmartCloud Control Panel shows that those 2 WAS instances are running, and could be miss-counted failed DB2 instance as third one.

      Is this information what you requested me? If you need any other information, I think I can show you.
      • morganri
        morganri
        109 Posts
        ACCEPTED ANSWER

        Re: Is it possible to deploy DB2 instance?

        ‏2012-07-05T15:07:44Z  in response to pi314
        Sorry for the delay, I was out of office due to the holidays. I will attempt to cross check with the logs to see if the instance count is correct.

        I have not reproduced an error message like the one you provided, as yet.

        //Rich
      • morganri
        morganri
        109 Posts
        ACCEPTED ANSWER

        Re: Is it possible to deploy DB2 instance?

        ‏2012-07-06T18:23:32Z  in response to pi314
        I checked the billable logs and I only see you have the (3) three instances running. I also confirmed the settings of your account appear normal.

        I would like to know you schedule to setup a free remote session with the team, but we should have the detailed logs first.

        Go into te SCAWS and select System / Troubleshooting. Select download the trace logs and then send to us.

        It might be a 15 MB ZIP file.

        Sincerely,

        //Rich
        • pi314
          pi314
          13 Posts
          ACCEPTED ANSWER

          Re: Is it possible to deploy DB2 instance?

          ‏2012-07-09T03:51:03Z  in response to morganri
          I have downloaded trace.zip from my SCAWS system.

          For remote session with me( in Tokyo ), that can't be in your business time, I guess. That would be your night time or early morning time. Which do you prefer ?
          • pi314
            pi314
            13 Posts
            ACCEPTED ANSWER

            Re: Is it possible to deploy DB2 instance?

            ‏2012-07-09T03:52:03Z  in response to pi314
            And how can I send my trace.zip to you?
            That seems to be over quota of this forum..
            • morganri
              morganri
              109 Posts
              ACCEPTED ANSWER

              Re: Is it possible to deploy DB2 instance?

              ‏2012-07-09T17:56:34Z  in response to pi314
              I sent you a reply via my internal email.

              Sincerely,

              //Rich
              • pi314
                pi314
                13 Posts
                ACCEPTED ANSWER

                Re: Is it possible to deploy DB2 instance?

                ‏2012-07-10T02:36:31Z  in response to morganri
                Thanks. I just sent you my trace.zip.
                • SystemAdmin
                  SystemAdmin
                  139 Posts
                  ACCEPTED ANSWER

                  Re: Is it possible to deploy DB2 instance?

                  ‏2012-07-13T09:33:33Z  in response to pi314
                  Hello.
                  I am also facing same trouble and waiting for update, thanks.
                  • morganri
                    morganri
                    109 Posts
                    ACCEPTED ANSWER

                    Re: Is it possible to deploy DB2 instance?

                    ‏2012-07-13T13:19:05Z  in response to SystemAdmin
                    Mizutani,

                    Thanks for making us aware.

                    Be sure you are using the Beta 3 image. I will note with development you are also having a failure to register on the VM.

                    I have recently duplicated this as well.

                    Sincerely,
                    //Rich
                    • SystemAdmin
                      SystemAdmin
                      139 Posts
                      ACCEPTED ANSWER

                      Re: Is it possible to deploy DB2 instance?

                      ‏2012-07-23T02:13:14Z  in response to morganri
                      Hello Rich.

                      Sorry for late reply.
                      Yes, now I use the Beta 3 image.

                      Anyway, it seems there is no update more than 2 weeks.
                      It is critical for us to use DB2 for verification.
                      Your update is appreciated.

                      Thanks.
                      • morganri
                        morganri
                        109 Posts
                        ACCEPTED ANSWER

                        Re: Is it possible to deploy DB2 instance?

                        ‏2012-07-25T20:34:11Z  in response to SystemAdmin
                        Kazuhito Mizutani

                        I wasn't sure if you are on the same project as Pi3.14

                        We have the problem logged for Service ID: 2615, but if you are using a different service instance and still having the issue then please create a trace file via the scaws troubleshooting.
                        http://www.ecurep.ibm.com/app/upload

                        Use generic PMR: 50838,550,000

                        Upload is for: other

                        Email address is (very important) is : morganri@us.ibm.com

                        If possible, could you prefix the trace file with the Service ID, such as SRVID123456_Trace

                        Sorry for the difficulties.
                        • pi314
                          pi314
                          13 Posts
                          ACCEPTED ANSWER

                          Re: Is it possible to deploy DB2 instance?

                          ‏2012-07-27T07:15:37Z  in response to morganri
                          Rich,

                          Mizutani-san and I are in same team.
                          We use different service, but our problem is same.

                          So could you analyze trace log file which I had sent for our problem.

                          Thanks.

                          ---
                          pi3.14
                          • morganri
                            morganri
                            109 Posts
                            ACCEPTED ANSWER

                            Re: Is it possible to deploy DB2 instance?

                            ‏2012-07-27T12:49:19Z  in response to pi314
                            Hi Pi3.14

                            We have analyzed the trace file and found some back office issue with build entitlement and disk space. We are in the process of resolving it for you .
                            Sincerely,

                            //Rich
                            • pi314
                              pi314
                              13 Posts
                              ACCEPTED ANSWER

                              Re: Is it possible to deploy DB2 instance?

                              ‏2012-07-30T06:41:23Z  in response to morganri
                              Hello Rich.

                              It must be a great step. We expect that would be resolved in near future.

                              Thanks for advance.
                          • morganri
                            morganri
                            109 Posts
                            ACCEPTED ANSWER

                            Re: Is it possible to deploy DB2 instance?

                            ‏2012-08-16T19:13:17Z  in response to pi314
                            Hi,
                            I have modified your account. Please reattempt your deployment, but first delete any previous instances, also only use Beta 3 version at this moment.

                            Thanks,

                            //Rich
                            • pi314
                              pi314
                              13 Posts
                              ACCEPTED ANSWER

                              Re: Is it possible to deploy DB2 instance?

                              ‏2012-10-16T08:05:05Z  in response to morganri
                              Hello.

                              Sorry for late reply. I didn't realize there were beta-5 released.

                              I have just confirmed that this problem has been resolved with SCAWS beta-5. I have created DB2 instance in VSP successfully.

                              Thanks for your support.