Topic
  • 3 replies
  • Latest Post - ‏2012-11-05T14:27:41Z by jaquice
ipshweng2
ipshweng2
4 Posts

Pinned topic "Blade power meter monitoring off line" errors on HS21s

‏2012-05-23T22:39:52Z |
We have a BCH chassis that contains a set of 14 HS21 blades. 12 of the 14 blades have started to generate "Blade power meter monitoring off line" errors that are recorded in the AMM event log. These errors are generated whenever the BCH is powered on(i.e. after it had previously been powered off).

The blades work fine, other than this. Is this something to be concerned with? Any suggestions on how to address this issue? I "googled" this error message, but couldn't find anything that worked.

I've attached the AMM service file. I also have the DSA file from a blade if that is useful.
Updated on 2012-11-05T14:27:41Z at 2012-11-05T14:27:41Z by jaquice
  • jaquice
    jaquice
    6 Posts

    Re: "Blade power meter monitoring off line" errors on HS21s

    ‏2012-11-02T19:27:13Z  
    Hi ipshweng2. Did you ever get an answer to this issue?

    Thank you.
  • SystemAdmin
    SystemAdmin
    3234 Posts

    Re: "Blade power meter monitoring off line" errors on HS21s

    ‏2012-11-03T07:25:37Z  
    Hi,

    • update the amm to the latest level (BPET62T)
    • update the firmware of the blades (BIOS: 1.22; DSA: 1.08; BMC: 1.23)

    http://publib.boulder.ibm.com/infocenter/bladectr/documentation/index.jsp?topic=/com.ibm.bladecenter.advmgtmod.doc/xhtml_messageoutput/msg_0x0E012041.html
    ______________
    Best regards
    >>>Time-to-Flash<<<
    Germany
  • jaquice
    jaquice
    6 Posts

    Re: "Blade power meter monitoring off line" errors on HS21s

    ‏2012-11-05T14:27:41Z  
    Hi,

    • update the amm to the latest level (BPET62T)
    • update the firmware of the blades (BIOS: 1.22; DSA: 1.08; BMC: 1.23)

    http://publib.boulder.ibm.com/infocenter/bladectr/documentation/index.jsp?topic=/com.ibm.bladecenter.advmgtmod.doc/xhtml_messageoutput/msg_0x0E012041.html
    ______________
    Best regards
    >>>Time-to-Flash<<<
    Germany
    Will give it a try Time-to-Flash and keep you posted. Currently here are my levels.

    BIOS 1.12
    DSA 1.06
    BMC 1.12
    62S for AMM