Topic
  • 4 replies
  • Latest Post - ‏2013-07-15T22:56:06Z by GarlandJoseph
cmeyer
cmeyer
2 Posts

Pinned topic OLD 7012 Integrated Ethernet Adaptor Settings

‏2012-05-22T20:56:21Z |
I have an old 7012-360 that I need to stick on the network for some data reference. It has an Integrated Ethernet Adaptor (devices.mca.8ef2). Does anyone know what speed/duplex settings this is set to so I can match my switch port? It apparently is fixed as there are no options to change these settings.
Updated on 2012-05-24T13:03:50Z at 2012-05-24T13:03:50Z by KarlM
  • KarlM
    KarlM
    3 Posts

    Re: OLD 7012 Integrated Ethernet Adaptor Settings

    ‏2012-05-24T09:13:49Z  
    I thought that was 10 base T on the integrated adapter but there is a jumper on the riser card, it should be in the "on" position for 10 base T.
  • cmeyer
    cmeyer
    2 Posts

    Re: OLD 7012 Integrated Ethernet Adaptor Settings

    ‏2012-05-24T12:29:19Z  
    • KarlM
    • ‏2012-05-24T09:13:49Z
    I thought that was 10 base T on the integrated adapter but there is a jumper on the riser card, it should be in the "on" position for 10 base T.
    I guess I should add this. The only connections on this is a 10Base2 (coax) and 10Base5 (thicknet). I am using a MAU on the thicknet connection to get my twosted pair (10BaseT) type connection.
  • KarlM
    KarlM
    3 Posts

    Re: OLD 7012 Integrated Ethernet Adaptor Settings

    ‏2012-05-24T13:03:50Z  
    • cmeyer
    • ‏2012-05-24T12:29:19Z
    I guess I should add this. The only connections on this is a 10Base2 (coax) and 10Base5 (thicknet). I am using a MAU on the thicknet connection to get my twosted pair (10BaseT) type connection.
    Wow! A vampire tap MAU... my vision is going all wavy and everyone around me seems to have beards and wear flares...

    Anyway, patch it in to a 10/half and it'll work even if it's full. It won't be fast but then it never was!
  • GarlandJoseph
    GarlandJoseph
    7 Posts

    Re: OLD 7012 Integrated Ethernet Adaptor Settings

    ‏2013-07-15T22:56:06Z  
    • KarlM
    • ‏2012-05-24T13:03:50Z
    Wow! A vampire tap MAU... my vision is going all wavy and everyone around me seems to have beards and wear flares...

    Anyway, patch it in to a 10/half and it'll work even if it's full. It won't be fast but then it never was!

    7012, vampire tap...old school! i suppose it could have been worse if you were forced to use a null modem cable. good luck and let me know when it's on ebay.