Topic
  • 1 reply
  • Latest Post - ‏2013-05-05T17:42:36Z by jefsmith_devworks
alchangd
alchangd
1 Post

Pinned topic Blank screen with connecting Personal Comm 5.9 with Comm Server 6.4 API

‏2012-05-18T16:44:10Z |
I have a Personal Comm 5.9 with Comm Server 6.4 API, connected to a Comm Server 6.4 with a link to an i5 6.1 using Enterprise Extender.

The Comm server connects OK, but when the Emulation starts on the client, the screen never show the login screen.

In the Comm Server, I have the following error:
5/18/2012 9:30:26.669 SNA Communications Subsystem NSMFSM.C 973
PCS4276E Abnormal UNBIND request received.
- Sense code is 0x08640002
- Local LU name is APPN.PC01
- Partner LU name is APPN.HONAS1
- Mode name is QPCSUPP
- UNBIND RU is:

320f0864 00026014 f61bdf0f 3eb6844f 0bc1d7d7 d54be6f2 f0f0f3c1 35130864
00020c00 0bc1d7d7 d54bc8d6 d5c1e2f1 00c8d6d5 c1e2f10a 13009634 af1bed63
40010000 6014f61b df0f3eb6 844f0bc1 d7d7d54b e6f2f0f0 f3c12b27 01012546
1080010b c1d7d7d5 4bc8d6d5 c1e2f121 0491c9d7 0fa50448 0a04020e 06573230
30334100 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
I'm adding all the configuration in the attachment.
Any help would be appreciated.

Attachments

  • jefsmith_devworks
    jefsmith_devworks
    20 Posts

    Re: Blank screen with connecting Personal Comm 5.9 with Comm Server 6.4 API

    ‏2013-05-05T17:42:36Z  

    The Sense Code for 08640002 is:

      REQUEST REJECT (CATEGORY CODE = X'08')
      ______________________________________

      This category indicates that the request was delivered to
      the intended component and was understood and supported,
      but not executed.

      0864      Function Abort:  The conversation was termi-
                nated abnormally.  Other terminations may occur
                after repeated reexecutions; the request sender
                is responsible to detect such a loop.

          0002  Excessive Elapsed Time--No Retry:  Exces-
                sive time has elapsed while waiting for a
                required action or event. For example, a
                transaction program has failed to issue a
                conversation-related protocol boundary
                verb.  No retry of the conversation
                should be attempted.

                For LU 6.2 half-duplex conversations,
                this sense data is sent in UNBIND when
                there is no chain to respond to; other-
                wise, it is sent in FMH-7.

                For LU 6.2 full-duplex conversations,
                this sense data is sent also in the nega-
                tive response that precedes an FMH-7.
                The sense data in the negative response
                results in advance notice to the trans-
                action program (in the form of an error
                return code) that an ERP message is
                forthcoming.  For this error, the ERP
                message will contain the same sense data
                value used in the negative response.
     

       It appears the AnyNet gateway is trying to connect to an LU that is there, but the application is not ready or cannot start. Are you sure the mapping of the SNA to ANYNET is working to connect to the right partner?  An emulation of this type looks to be a dependent LU (3270), but the sense code is for LU6.2, or independent. Is the LU correct?

     

    Jeff Smith   Distribute Comm. Server development