Topic
IC4NOTICE: developerWorks Community will be offline May 29-30, 2015 while we upgrade to the latest version of IBM Connections. For more information, read our upgrade FAQ.
8 replies Latest Post - ‏2012-10-02T09:47:47Z by SystemAdmin
stinsoninc
stinsoninc
3 Posts
ACCEPTED ANSWER

Pinned topic Cast Iron Project - Status: Deploying

‏2012-05-14T17:34:55Z |
I published a project from Cast Iron Studio 6.1.0.3, but when I go to the Web Management Console, it says the status is "Deploying" - not "Deployed". In this "ing" state I can't do anything. I can't run it, suspend it, delete it.

Any ideas why it would be stuck in this "ing" state?

Thank you for any help.
Updated on 2012-10-02T09:47:47Z at 2012-10-02T09:47:47Z by SystemAdmin
  • stinsoninc
    stinsoninc
    3 Posts
    ACCEPTED ANSWER

    Re: Cast Iron Project - Status: Deploying

    ‏2012-05-14T22:29:48Z  in response to stinsoninc
    Well, I restarted the appliance and all "stopping" statuses have now resolved to "stopped". I don't know if this is proper solve. I wouldn't want to do this if I had several other critical orchestrations, but I happened to have a window where I could restart the whole thing.

    Hopefully there is a better answer out there :)
    • stinsoninc
      stinsoninc
      3 Posts
      ACCEPTED ANSWER

      Re: Cast Iron Project - Status: Deploying

      ‏2012-05-24T00:26:04Z  in response to stinsoninc
      I guess no one monitors these. Too bad.
      • Sathya400
        Sathya400
        5 Posts
        ACCEPTED ANSWER

        Re: Cast Iron Project - Status: Deploying

        ‏2012-07-17T15:50:44Z  in response to stinsoninc
        I am also having same issue. Its crazzy. I can not do anything. I tried restarting anf rebooting still no luck. Can some one help please. Thanks.
        • SystemAdmin
          SystemAdmin
          224 Posts
          ACCEPTED ANSWER

          Re: Cast Iron Project - Status: Deploying

          ‏2012-07-17T15:59:06Z  in response to Sathya400
          Hi,
          Did you open a PMR on Cast Iron Support? If no, I would advise you to do so quickly.
          • Sathya400
            Sathya400
            5 Posts
            ACCEPTED ANSWER

            Re: Cast Iron Project - Status: Deploying

            ‏2012-07-24T22:03:15Z  in response to SystemAdmin
            Magali, Not yet. I will do that. But I am curious does this something do with any configuration or this is a open issue with this tool ? I really need to know how to fix this problem. It does not make sense to open PMR every time whenever this issue happen again. Your help and instruction would be really appreciated for this thread and forum. Thanks.
            • SystemAdmin
              SystemAdmin
              224 Posts
              ACCEPTED ANSWER

              Re: Cast Iron Project - Status: Deploying

              ‏2012-08-16T13:25:37Z  in response to Sathya400
              Hi, just getting back from holidays and checking if your problem is fixed now. Did you open a PMR or not?
              Thanks,
              Magali
              • kwmc
                kwmc
                2 Posts
                ACCEPTED ANSWER

                Re: Cast Iron Project - Status: Deploying

                ‏2012-10-01T16:45:27Z  in response to SystemAdmin
                Hi Magali,I got the same problem, the orchestration is in the deploying state for couple of hours, is there anything I can do to delete or finish the deploying? Thank you.
                • SystemAdmin
                  SystemAdmin
                  224 Posts
                  ACCEPTED ANSWER

                  Re: Cast Iron Project - Status: Deploying

                  ‏2012-10-02T09:47:47Z  in response to kwmc
                  Hi,
                  Before opening a PMR to Cast Iron Support, you may want to try and upgrade to the lastest release. Also, you may want to try and use the SOAP API interface to stop and undeploy the project.
                  And do not forget to open a PMR if the above does not work!

                  Regards,
                  Magali