Topic
  • 4 replies
  • Latest Post - ‏2012-04-03T08:58:01Z by bhanubolla
bhanubolla
bhanubolla
8 Posts

Pinned topic Message Queues to be inserted with xml SOAP Injection

‏2012-04-03T07:32:40Z |
Hi,

We had a requirement for one of project , after insertion of xml SOAP file message queues(xml files ) to be inserted and capture timings.Can you please advice solution in RPT how we can proceed for this.

Thanks,
Bhanu kiran
Updated on 2012-04-03T08:58:01Z at 2012-04-03T08:58:01Z by bhanubolla
  • SystemAdmin
    SystemAdmin
    5507 Posts

    Re: Message Queues to be inserted with xml SOAP Injection

    ‏2012-04-03T07:40:49Z  
    Hi Bhanu
    Could you elaborate on the structure of the application ( how the message is structured, which kind of transport has to be used, how the xml file is attached ) and the requirement ?
    Thank you.
  • bhanubolla
    bhanubolla
    8 Posts

    Re: Message Queues to be inserted with xml SOAP Injection

    ‏2012-04-03T08:04:13Z  
    Hi Bhanu
    Could you elaborate on the structure of the application ( how the message is structured, which kind of transport has to be used, how the xml file is attached ) and the requirement ?
    Thank you.
    Hi Wurth,

    We need to inject WMS Soap xml requests from RPT, then this routes through new IBM infrastructure as shown in below diagram, formats into a template and produces a PDF, which will be sent to HP Assured Delivery for printing.

    After injecting WMS soap xml requests, we need to capture response times from Queues as listed below:

    · to capture the response time from the 1st (WMS) call to the DPC receiver application(Reciever App). (Queue name - Request Queue)
    · Capture end to end response times, when messages from DPC Receiver application, are passed through (Queue name - Exstream Input Queue) HP Exstream engine till PDF is generated (Queue name - .Exstream Output Queue)
    · Capture end to end response times, when PDF from Exstream engine is routed to Print Q.
    After Injecting soap requests, we can view the messages passing through various intermediate queues, by installing IBM Websphere MQ explorer on the injectors.
    We can seek Sumanth's help for checking these queues, on the MQ explorer. Queue Manager: Princes.Dev.QMgr on Princes(1414)

    Please let me know if anything required.

    Thanks,
    Bhanukiran
  • SystemAdmin
    SystemAdmin
    5507 Posts

    Re: Message Queues to be inserted with xml SOAP Injection

    ‏2012-04-03T08:32:32Z  
    Hi Wurth,

    We need to inject WMS Soap xml requests from RPT, then this routes through new IBM infrastructure as shown in below diagram, formats into a template and produces a PDF, which will be sent to HP Assured Delivery for printing.

    After injecting WMS soap xml requests, we need to capture response times from Queues as listed below:

    · to capture the response time from the 1st (WMS) call to the DPC receiver application(Reciever App). (Queue name - Request Queue)
    · Capture end to end response times, when messages from DPC Receiver application, are passed through (Queue name - Exstream Input Queue) HP Exstream engine till PDF is generated (Queue name - .Exstream Output Queue)
    · Capture end to end response times, when PDF from Exstream engine is routed to Print Q.
    After Injecting soap requests, we can view the messages passing through various intermediate queues, by installing IBM Websphere MQ explorer on the injectors.
    We can seek Sumanth's help for checking these queues, on the MQ explorer. Queue Manager: Princes.Dev.QMgr on Princes(1414)

    Please let me know if anything required.

    Thanks,
    Bhanukiran
    Hi
    There is a feature in the RPT SOA extension that allows to mesure time for an XML exchange based on the MQ Transport for a point to point communiation with messages correlation based on the message id or the correlation id. In this case this is possible to specify the call and anwer queue and measure easilly the reception time ( the overall use case is explained into this tutorial http://www.ibm.com/developerworks/rational/tutorials/dw-rt-tsqws/dw-rt-tsqws-pdf.pdf ).
    Thank you.
  • bhanubolla
    bhanubolla
    8 Posts

    Re: Message Queues to be inserted with xml SOAP Injection

    ‏2012-04-03T08:58:01Z  
    Hi
    There is a feature in the RPT SOA extension that allows to mesure time for an XML exchange based on the MQ Transport for a point to point communiation with messages correlation based on the message id or the correlation id. In this case this is possible to specify the call and anwer queue and measure easilly the reception time ( the overall use case is explained into this tutorial http://www.ibm.com/developerworks/rational/tutorials/dw-rt-tsqws/dw-rt-tsqws-pdf.pdf ).
    Thank you.
    Thanks Wurth,

    PDF provided by you was help ful. We had a license for SOA protocol. Apart from this do we need any Webspehere MessageQueue protocol license also to be taken to work for this requirements correct me if iam wrong.

    Can you please advice list of protocols to be included for this Requirement.
    Cheers,
    Bhanu kiran