Topic
  • 4 replies
  • Latest Post - ‏2012-02-28T08:48:56Z by nukite8d
nukite8d
nukite8d
98 Posts

Pinned topic Auditing Exclude Node

‏2012-02-21T12:33:13Z |
Hi Group,
this morning we wanted to exclude some nodes, but they were already excluded.
Now I'm searching for Logs/Msgs saying, what happend.

We can I see, when and who did the exclude?

From the ISC the Domain-Log (msgAdapter.log) conatins only msgs about stopping resources.
And there is no Log-Button for a selected node.
The resource-History tells "Warning: The resource's node has been excluded from automation", but no more.

In SAMP I looked in samlog, but found nothing.

Regards,
Manfred
Updated on 2012-02-28T08:48:56Z at 2012-02-28T08:48:56Z by nukite8d
  • Enrico_Joedecke
    Enrico_Joedecke
    121 Posts

    Re: Auditing Exclude Node

    ‏2012-02-21T13:30:13Z  
    Hello Manfred,

    from the SA MP side you can check the following:

    1. /var/ct/IBM.RecoveryRM.log

    This file contains all SA MP commands executed on this node, e.g. for exclude node:

    >> User root invoked "samctrl -u a node1" on Mon Feb 20 14:58:39 CET 2012

    2. samlog should show this information starting with SA MP 3.2.1.3, or higher:

    >> 14:30:23.072027 T(4144227536) _RCD Node excluded: node1/Node/IBM.PeerNode

    Thank you,
    Enrico Joedecke
  • nukite8d
    nukite8d
    98 Posts

    Re: Auditing Exclude Node

    ‏2012-02-21T13:59:01Z  
    Hello Manfred,

    from the SA MP side you can check the following:

    1. /var/ct/IBM.RecoveryRM.log

    This file contains all SA MP commands executed on this node, e.g. for exclude node:

    >> User root invoked "samctrl -u a node1" on Mon Feb 20 14:58:39 CET 2012

    2. samlog should show this information starting with SA MP 3.2.1.3, or higher:

    >> 14:30:23.072027 T(4144227536) _RCD Node excluded: node1/Node/IBM.PeerNode

    Thank you,
    Enrico Joedecke
    Hello Enrico,
    thanks for the fast answer.

    I look in the /var/ct/IBM.RecoveryRM.log. but I wasn't able to find the commands.
    And as we are using SAMP 3.2.1.1, I couldn't find the samlog message.

    I got the information, that one operator excluded the node by using the ISC. Isn't there any log-entry like the entries for Requests?
  • Enrico_Joedecke
    Enrico_Joedecke
    121 Posts

    Re: Auditing Exclude Node

    ‏2012-02-23T14:13:42Z  
    Hello Manfred,

    from the ISC you should be able to find the message 'SAMA0613I', when you check the log file (View log button, while the FLA domain is selected).

    Enrico
  • nukite8d
    nukite8d
    98 Posts

    Re: Auditing Exclude Node

    ‏2012-02-28T08:48:56Z  
    Hello Manfred,

    from the ISC you should be able to find the message 'SAMA0613I', when you check the log file (View log button, while the FLA domain is selected).

    Enrico
    Hello Enrico,
    back then I couldn't find the messages, but after some testing I saw
    SAMA0612I for excludes and
    SAMA0613I for includes.
    """
    Node domain: TSAMP_MWA_test_2 node: node02 has been excluded from automation on behalf of user XXX.
    """

    And after even more testing I noticed, why I couldn't find the first excludes:
    The log-Button shows only the local msgAdapter.log

    When you exclude the node, running the samadapter,
    it first writes the SAMA0612I msg into the local msgAdapter-log, then moves the samadapter.
    Looking in the new local msgAdapter.log gives no Exclude-Msg!

    We hoped, to get the complete cluster-spanning log, using the button in the ISC-OC.