Topic
  • 15 replies
  • Latest Post - ‏2013-08-05T13:38:34Z by Pavel_Alexei
SystemAdmin
SystemAdmin
9111 Posts

Pinned topic xseries 226 Problem!!!

‏2006-11-10T16:23:46Z |
Hi to all, i have a problem with my server is a xseries 226, it works just fine but sudendly it turns off and then it wont start again, the alert led is off and i can't get a video signal even the bios...:S .... the power supply are fine, they provide the energy... the cd-rom and all are with energy the fan's start good and the cd-rom too, but i can't enter the OS neither the BIOS or boot from another device... i need your help.. please... i'm afraid it would be the system board.... what can i do?????

Thanks a Lot....

God Bless you.... :D

Atte. Juan Grijalva
Updated on 2008-09-04T18:08:28Z at 2008-09-04T18:08:28Z by Novikov_Alexander
  • Novikov_Alexander
    Novikov_Alexander
    6865 Posts

    Re: xseries 226 Problem!!!

    ‏2006-11-10T18:47:05Z  
    Dear Juan Grijalva,

    give more information for us about your system. Just attach DSA log to this forum message.

    Regards,
    Alexander Novikov
    Russia, Moscow
  • SystemAdmin
    SystemAdmin
    9111 Posts

    Re: xseries 226 Problem!!!

    ‏2006-11-13T17:37:57Z  
    Dear Juan Grijalva,

    give more information for us about your system. Just attach DSA log to this forum message.

    Regards,
    Alexander Novikov
    Russia, Moscow
    Thanks Alexander, the server is up now, the issue was a false contact, now is working fine... i hope never happends again... but thanks for your time and your help....

    Juan Grijalva
  • SystemAdmin
    SystemAdmin
    9111 Posts

    Re: xseries 226 Problem!!!

    ‏2007-01-08T12:46:28Z  
    Thanks Alexander, the server is up now, the issue was a false contact, now is working fine... i hope never happends again... but thanks for your time and your help....

    Juan Grijalva
    I have a similar problem.
    Please let me know which contact was bad.

    Thanks,
    Marko
  • Novikov_Alexander
    Novikov_Alexander
    6865 Posts

    Re: xseries 226 Problem!!!

    ‏2007-01-08T16:25:44Z  
    I have a similar problem.
    Please let me know which contact was bad.

    Thanks,
    Marko
    Dear Marko,

    just check all contacts, it is very simple and quick.

    Regards,
    Alexander Novikov
    Russia, Moscow
  • SystemAdmin
    SystemAdmin
    9111 Posts

    Re: xseries 226 Problem!!!

    ‏2007-01-09T16:32:08Z  
    Dear Marko,

    just check all contacts, it is very simple and quick.

    Regards,
    Alexander Novikov
    Russia, Moscow
    Thanks Aleksander,
    I'll check all of the contacts.

    Is there an option to assign points on this forum... I am sort of new on IBM.

    marko
  • Novikov_Alexander
    Novikov_Alexander
    6865 Posts

    Re: xseries 226 Problem!!!

    ‏2007-01-10T08:10:11Z  
    Thanks Aleksander,
    I'll check all of the contacts.

    Is there an option to assign points on this forum... I am sort of new on IBM.

    marko
    marko,

    you are welcome.

    What do you mean "assign points" ?
    May be you meant signature. In this case go to "Edit your profile".

    Best regards,
    Alexander Novikov
    Russia, Moscow
  • SystemAdmin
    SystemAdmin
    9111 Posts

    Re: xseries 226 Problem!!!

    ‏2007-01-10T08:59:04Z  
    Thanks Aleksander,
    I'll check all of the contacts.

    Is there an option to assign points on this forum... I am sort of new on IBM.

    marko
    Do you mean Usenet articles scoring?
    AFAIK this is a web only forum, so no NNTP access, and no scoring articles with your newsgroup client.
  • Stokie
    Stokie
    573 Posts

    Re: xseries 226 Problem!!!

    ‏2007-01-10T09:14:26Z  
    Do you mean Usenet articles scoring?
    AFAIK this is a web only forum, so no NNTP access, and no scoring articles with your newsgroup client.
    I suspect it is a reference to the HP website where you can assign points to folks who answer your questions ...

    See http://forums1.itrc.hp.com/service/forums/home.do?admit=-682735245+1168420409464+28353475
    Stokie
  • SystemAdmin
    SystemAdmin
    9111 Posts

    Re: xseries 226 Problem!!!

    ‏2007-01-10T09:24:54Z  
    • Stokie
    • ‏2007-01-10T09:14:26Z
    I suspect it is a reference to the HP website where you can assign points to folks who answer your questions ...

    See http://forums1.itrc.hp.com/service/forums/home.do?admit=-682735245+1168420409464+28353475
    Stokie
    That would make sense.

    (Having said that, I still wouldn't mind NNTP access to the dw forums ;)
  • SystemAdmin
    SystemAdmin
    9111 Posts

    Re: xseries 226 Problem!!!

    ‏2007-01-11T08:53:08Z  
    • Stokie
    • ‏2007-01-10T09:14:26Z
    I suspect it is a reference to the HP website where you can assign points to folks who answer your questions ...

    See http://forums1.itrc.hp.com/service/forums/home.do?admit=-682735245+1168420409464+28353475
    Stokie
    Yes, this is what I ment.
  • SystemAdmin
    SystemAdmin
    9111 Posts

    Re: xseries 226 Problem!!!

    ‏2007-01-20T22:56:33Z  
    Thanks Alexander, the server is up now, the issue was a false contact, now is working fine... i hope never happends again... but thanks for your time and your help....

    Juan Grijalva
    I have the same problem now with my brand new IBM 226.. I booted up the first time everything worked perfect, went into the BIOS and checked the time / rebooted then nothing comes up on the monitor now.. I am having the same issue as you.

    Can you tell me how you fixed the issue?

    Joel
    nordsj@charter.net
  • SystemAdmin
    SystemAdmin
    9111 Posts

    Re: xseries 226 Problem!!!

    ‏2008-09-04T17:08:17Z  
    Same... my pc was working fine yesterday, now it just dosent turns on at all, all i heard are 3 series of 3 beeps... and nothing more... i made a new thread here:

    http://www.ibm.com/developerworks/forums/thread.jspa?threadID=224359

    Hope anyone can help, also the alert led is turned off.
  • Novikov_Alexander
    Novikov_Alexander
    6865 Posts

    Re: xseries 226 Problem!!!

    ‏2008-09-04T18:08:28Z  
    Same... my pc was working fine yesterday, now it just dosent turns on at all, all i heard are 3 series of 3 beeps... and nothing more... i made a new thread here:

    http://www.ibm.com/developerworks/forums/thread.jspa?threadID=224359

    Hope anyone can help, also the alert led is turned off.
    Dear DarkLobo,

    read next doc (just search 3-3-3 inside):

    Hardware Maintenance Manual and Troubleshooting Guide - IBM eServer xSeries 226 (Type 8488, 8648)
    https://www-304.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-56141&brandind=5000008

    Regards,
    Alexander Novikov
    Russia, Moscow
  • becasoft
    becasoft
    1 Post

    Re: xseries 226 Problem!!!

    ‏2013-08-05T11:45:37Z  
    Dear Juan Grijalva,

    give more information for us about your system. Just attach DSA log to this forum message.

    Regards,
    Alexander Novikov
    Russia, Moscow

    i have IBM 226 servers can't boot, when i press power button the fun of the server turn and stop.

    can you tell me how can i fix this issue ??

     

    Updated on 2013-08-05T11:46:36Z at 2013-08-05T11:46:36Z by becasoft
  • Pavel_Alexei
    Pavel_Alexei
    3 Posts

    Re: xseries 226 Problem!!!

    ‏2013-08-05T13:38:34Z  
    • becasoft
    • ‏2013-08-05T11:45:37Z

    i have IBM 226 servers can't boot, when i press power button the fun of the server turn and stop.

    can you tell me how can i fix this issue ??

     

    I had the similar problem and it resulted in failed PSU. Try another power supply, as far i remember it's possible to attach just for testing purpise an simple PSU.