Topic
3 replies Latest Post - ‏2012-12-22T10:27:57Z by Novikov_Alexander
budowniczy
budowniczy
1 Post
ACCEPTED ANSWER

Pinned topic IBM x226 (MSI 9151) memory upgrade

‏2011-11-02T11:01:15Z |
I`d like to upgrade memory. Banks 0-3 are filled with 1GB and 4-5 with 0,5GB. I think to change those 2x 512MB with 2x 2GB. Everywhere on the network I see DDR2 PC3200... but PC3200 means 400 MHz, while DDR2 are faster. Can I put recc/ecc "any" DDR2? I don`t have manual for this mainboard, that`s why I ask You :).

Thx for answer.
budowniczy
Updated on 2012-12-22T10:27:57Z at 2012-12-22T10:27:57Z by Novikov_Alexander
  • Novikov_Alexander
    Novikov_Alexander
    6863 Posts
    ACCEPTED ANSWER

    Re: IBM x226 (MSI 9151) memory upgrade

    ‏2011-11-02T17:41:29Z  in response to budowniczy
    Dear Przemyslaw,

    list of supported RDIMMs available on the next page:

    Memory accessories - IBM eServer xSeries 226
    http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-56226&brandind=5000008

    "manual for this mainboard" available on the next page:

    Option Installation Guide - IBM eServer xSeries 226
    http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-56656&brandind=5000008

    Regards,
    Alexander Novikov
    Russia, Moscow
    • SystemAdmin
      SystemAdmin
      9111 Posts
      ACCEPTED ANSWER

      Re: IBM x226 (MSI 9151) memory upgrade

      ‏2012-12-22T07:54:41Z  in response to Novikov_Alexander
      Alexander, I have the same server, but if the documentation you provided there are some inconsistencies.
      Documentation tells us that

      Install only1.8V,184-pin,double-data-rate2(DDR2),PC2-3200,registered,
      synchronousdynamicrandom-accessmemory(SDRAM)witherrorcorrecting
      code(ECC),dualinline memorymodules(DIMMs).TheseDIMMsmustbe
      compatiblewiththe latest PC2-3200SDRAMbufferedDIMMspecification.Fora
      list ofsupportedoptionsfor yourserver,goto http://www.ibm.com/pc/;then,
      selectyourcountryandnavigateto the list ofoptionsfor yourserver.

      In real this server has 240 pin hynix memory 39M5811 (in my case)

      In addition

      1. Donotinstall four, 2GBdouble-rankDIMMsfor the servermaximumcapacity
      *(8GB)*configuration,the serverdoesnotsupportit.

      So, is it possible to install 39M5811 into all slots and have 12 GB ?
      • Novikov_Alexander
        Novikov_Alexander
        6863 Posts
        ACCEPTED ANSWER

        Re: IBM x226 (MSI 9151) memory upgrade

        ‏2012-12-22T10:27:57Z  in response to SystemAdmin
        Dear Evgeny,

        list of supported RDIMMs available on the next page:

        Memory accessories - IBM eServer xSeries 226
        https://www-947.ibm.com/support/entry/myportal/docdisplay?lndocid=MIGR-56226

        Regards,
        Alexander Novikov
        Russia, Moscow