Topic
  • 5 replies
  • Latest Post - ‏2014-04-02T08:54:10Z by Thomas Bjørk
SystemAdmin
SystemAdmin
3234 Posts

Pinned topic BNT Layer 2/3 GB Copper Ethernet Switch Module ACL problems

‏2011-09-17T02:07:45Z |
Hi all,
When i setup the acl, i got the follow messages "ERROR cfg: ERROR: Port INT13 has more than 7 precedence levels", does the switch not support more than 7 acl?
Updated on 2011-09-17T17:45:10Z at 2011-09-17T17:45:10Z by Novikov_Alexander
  • Novikov_Alexander
    Novikov_Alexander
    1150 Posts

    Re: BNT Layer 2/3 GB Copper Ethernet Switch Module ACL problems

    ‏2011-09-17T06:46:51Z  
    Dear Boris,

    there is info in Application Guide, section Port-Based QoS Actions :

    "Each port supports up to seven precedence levels."

    Regards,
    Alexander Novikov
    Russia, Moscow
  • SystemAdmin
    SystemAdmin
    3234 Posts

    Re: BNT Layer 2/3 GB Copper Ethernet Switch Module ACL problems

    ‏2011-09-17T14:02:15Z  
    Dear Boris,

    there is info in Application Guide, section Port-Based QoS Actions :

    "Each port supports up to seven precedence levels."

    Regards,
    Alexander Novikov
    Russia, Moscow
    Thanks Alexander,

    Is that mean i can only applied seven access list per port. any suggest if i need set more access-list to control the host?
  • Novikov_Alexander
    Novikov_Alexander
    1150 Posts

    Re: BNT Layer 2/3 GB Copper Ethernet Switch Module ACL problems

    ‏2011-09-17T17:45:10Z  
    Thanks Alexander,

    Is that mean i can only applied seven access list per port. any suggest if i need set more access-list to control the host?
    Hi Boris,

    there is info in Application Guide :

    "Each port can accept up to 127 filters, including ACL Groups."

    Nortel Networks Layer 2-3 GbE Switch Module Alteon OS 21.0 Publications - IBM BladeCenter
    http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5081559

    Regards,
    Alexander Novikov
    Russia, Moscow
  • Thomas Bjørk
    Thomas Bjørk
    2 Posts

    Re: BNT Layer 2/3 GB Copper Ethernet Switch Module ACL problems

    ‏2014-04-02T08:53:31Z  
    Hi Boris,

    there is info in Application Guide :

    "Each port can accept up to 127 filters, including ACL Groups."

    Nortel Networks Layer 2-3 GbE Switch Module Alteon OS 21.0 Publications - IBM BladeCenter
    http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5081559

    Regards,
    Alexander Novikov
    Russia, Moscow

    Hi Alexander,

    I have the exact same problem as SystemAdmin. But i cannot see the solution in the document you have linked.

    What is the difference between "precedence levels" and "precedence groups"? What is a "precedence level"?

    I get the error each time a reach over 7 ACL entries.

    Thomas Bjørk
    Denmark

     

  • Thomas Bjørk
    Thomas Bjørk
    2 Posts

    Re: BNT Layer 2/3 GB Copper Ethernet Switch Module ACL problems

    ‏2014-04-02T08:54:10Z  

    Hi SystemAdmin,

    Did you ever solved this problem?

    Thomas