Topic
1 reply Latest Post - ‏2011-12-01T23:09:08Z by SystemAdmin
Theo11
Theo11
1 Post
ACCEPTED ANSWER

Pinned topic NIC resetting after sys brd replacement

‏2011-09-15T19:55:52Z |
I'm having an issue of the NIC not being recognized as eth0 after a system board is replaced, with the same hdd installed. eth0 is required for our setup, and this breaks dhcp and halting all accessibility for the machine. Hardware is 4800-782. OS is SLES11 (issue occurs before and after SP1).

These systems are remote, and it is cumbersome to walk a non technical end user (or technician) through the commands to manually reset it, not to mention providing the individual a password. I have a shortcut workaround in place, but I want to determine the root cause and fix the issue at the source.

Any thoughts? Please let me know what further information would be necessary to diagnose.
Updated on 2011-12-01T23:09:08Z at 2011-12-01T23:09:08Z by SystemAdmin
  • SystemAdmin
    SystemAdmin
    2364 Posts
    ACCEPTED ANSWER

    Re: NIC resetting after sys brd replacement

    ‏2011-12-01T23:09:08Z  in response to Theo11
    Hi, Theo.

    Did you ever get an answer on this? IRQ conflicts are the first thing that spring to mind.

    Cheers!
    Chris Walden