Topic
  • 5 replies
  • Latest Post - ‏2012-04-16T12:47:45Z by RDzJohn
VanceMorris
VanceMorris
27 Posts

Pinned topic RDz UT Host Configuration

‏2011-05-18T23:13:01Z |
I hope you can help me out again, I seem to have borked something during the process.

FEKSETUP has ran correctly with no problems. I removed the testing statement and ran it again.
Created and modified start up procedures as described for JMON, LOCKD, and RSED.
Edited COMMONDB, LPALSTCI, and PROGDB as described in the guide.

When I went to run TSO OMVS to edit /usr/lpp/rdz/etc/rdz/rsed.envvars, everything fell apart on me.


FSUM2055I The OMVS command cannot use the message catalog.+ FSUM2056I Function = catopen(), catalog name = 
'/usr/lib/nls/msg/C/fsumucat.cat 
', return value = -1, errno = 129 (X'00000081
'), reason code = 0594003D, descrip tion = 
'EDC5129I No such file or directory.' ... FSUM2319 No session was started.  The program to start the shell could not be in voked. Function = execl(), program name = 
'/bin/login', errno = 129 (X
'00000081'), reas on code = 053B006C, message = 
'EDC5129I No such file or directory.' ... FSUM2194I The end of the session was not recorded.  The recording program could not be invoked.+ FSUM2195I Function = execl(), terminal name = 
'/dev/ttyp0000', program name = 
' /bin/fomtlout
', errno = 129 (X'00000081
'), description = 'EDC5129I No such file or directory.
'

At this point I decided to IPL the system, and I'm getting some other oddball errors.

IEA712I LPALST LIBRARY DATA SETS IGNORED RDZUT.SFEKLPA                                 -UNABLE TO LOCATE


BPXI029I AN OMVS= PARMLIB MEMBER WAS NOT FOUND OR IS IN ERROR. IEA341A RESPECIFY OMVS PARM OR PRESS ENTER


@16.48.08 STC00027 @02 DFHPA1909   CICS     DATA /usr/lpp/cicsts/cicsts41 @ IS INVALID FOR KEYWORD USSHOME=. RESPECIFY KEYWORD AND DATA.
Updated on 2012-04-16T12:47:45Z at 2012-04-16T12:47:45Z by RDzJohn
  • RDzJohn
    RDzJohn
    273 Posts

    Re: RDz UT Host Configuration

    ‏2011-05-19T11:21:48Z  
    Vance,
    You may have multiple problems. Check the syntax of your BPXPRMxx member that you updated for the RDz HFS. It looks like you may have corrupted something in the file when you edited it. Double check all edited members to ensure there are no extraneous characters. The message about LPA is likely because you need to ipl with a cold start to get the module loaded into LPA.

    RDzJohn
  • VanceMorris
    VanceMorris
    27 Posts

    Re: RDz UT Host Configuration

    ‏2012-04-06T17:41:33Z  
    • RDzJohn
    • ‏2011-05-19T11:21:48Z
    Vance,
    You may have multiple problems. Check the syntax of your BPXPRMxx member that you updated for the RDz HFS. It looks like you may have corrupted something in the file when you edited it. Double check all edited members to ensure there are no extraneous characters. The message about LPA is likely because you need to ipl with a cold start to get the module loaded into LPA.

    RDzJohn
    Sorry to dig up an old post, but I'm seeing this error again right at the start of IPL.

    
    IEA712I LPALST LIBRARY DATA SETS IGNORED RDZUT.SFEKLPA                                 -UNABLE TO LOCATE
    


    When I do a cold start the message does not appear, but then restarting again into the DC operational mode it reappears.

    Apologies for my daftness, but I'm assuming there is something I need to do during cold start operation to register the module into LPA so it works find in my normal IPL.

    Thanks in advance for the assistance.
    -Vance
  • RDzJohn
    RDzJohn
    273 Posts

    Re: RDz UT Host Configuration

    ‏2012-04-09T11:21:27Z  
    Sorry to dig up an old post, but I'm seeing this error again right at the start of IPL.

    <pre class="jive-pre"> IEA712I LPALST LIBRARY DATA SETS IGNORED RDZUT.SFEKLPA -UNABLE TO LOCATE </pre>

    When I do a cold start the message does not appear, but then restarting again into the DC operational mode it reappears.

    Apologies for my daftness, but I'm assuming there is something I need to do during cold start operation to register the module into LPA so it works find in my normal IPL.

    Thanks in advance for the assistance.
    -Vance
    Make sure the offending dataset, 'RDZUT.SFEKLPA' is contained in an LPALSTxx member pointed to by the IEASYSxx member you are using. Also make sure the phycial device where RDZUT.SFEKLPA resides is active and online in your configuration.

    RDzJohn
  • VanceMorris
    VanceMorris
    27 Posts

    Re: RDz UT Host Configuration

    ‏2012-04-13T19:11:29Z  
    • RDzJohn
    • ‏2012-04-09T11:21:27Z
    Make sure the offending dataset, 'RDZUT.SFEKLPA' is contained in an LPALSTxx member pointed to by the IEASYSxx member you are using. Also make sure the phycial device where RDZUT.SFEKLPA resides is active and online in your configuration.

    RDzJohn
    Hi John,

    I'm using DB to IPL my system, so inside ADCD.Z111S.PARMLIB(IEASYSDB), I see
    000016 LPA=CI, SELECT LPALSTCI

    So I added 'RDZUT.SFEKLPA' to ADCD.Z111S.PARMLIB(LPALSTCI), but the message still appears:
    
    IEA712I LPALST LIBRARY DATA SETS IGNORED RDZUT.SFEKLPA                                 -UNABLE TO LOCATE
    
  • RDzJohn
    RDzJohn
    273 Posts

    Re: RDz UT Host Configuration

    ‏2012-04-16T12:47:45Z  
    Hi John,

    I'm using DB to IPL my system, so inside ADCD.Z111S.PARMLIB(IEASYSDB), I see
    000016 LPA=CI, SELECT LPALSTCI

    So I added 'RDZUT.SFEKLPA' to ADCD.Z111S.PARMLIB(LPALSTCI), but the message still appears:
    <pre class="jive-pre"> IEA712I LPALST LIBRARY DATA SETS IGNORED RDZUT.SFEKLPA -UNABLE TO LOCATE </pre>
    Make sure the dataset exists on the volume you expect it to be on. Make sure it is cataloged and that the volume is online. After you ipl you should be able to do a D PROG,LPA and you should see all of the datasets added to LPA. A D PROG,LNKLST will show you all of the datasets added to lnklst and those that are APF authorized. If you still make no headway, append your LPALSTCI member here.

    RDzJohn