Topic
5 replies Latest Post - ‏2013-12-16T06:59:00Z by 7P0S_Evgeniy_Shvarev
NevenR
NevenR
6 Posts
ACCEPTED ANSWER

Pinned topic New 750 GB SATA in DS3300 Loss of Path Redundancy

‏2011-02-19T19:00:37Z |
Hi,

got a 4 new disks (SATA)
IBM option: 43W7580
FRU: 43W7583
PN: 43W7658

Inserted in compatibile DS3300 latest firmare, storage manager, etc...

3 Drives reporting: Drive - Loss of Path Redundancy
1 Drive reporting: Failed or In-Use Hot Spare Legacy Drive

It's new drives...

Regards... (serverproven, guides, all ok)
Updated on 2011-06-05T23:20:14Z at 2011-06-05T23:20:14Z by NevenR
  • Novikov_Alexander
    Novikov_Alexander
    1398 Posts
    ACCEPTED ANSWER

    Re: New 750 GB SATA in DS3300 Loss of Path Redundancy

    ‏2011-02-25T21:18:50Z  in response to NevenR
    Dear Neven,

    lets check DS3300 Support Archive.

    Regards,
    Alexander Novikov
    Russia, Moscow
    • NevenR
      NevenR
      6 Posts
      ACCEPTED ANSWER

      Re: New 750 GB SATA in DS3300 Loss of Path Redundancy

      ‏2011-03-13T16:14:05Z  in response to Novikov_Alexander
      Here it is...

      Sorry for late response, was away...
      • Novikov_Alexander
        Novikov_Alexander
        1398 Posts
        ACCEPTED ANSWER

        Re: New 750 GB SATA in DS3300 Loss of Path Redundancy

        ‏2011-03-14T06:58:55Z  in response to NevenR
        Hi Neven,

        first of all update HDDs firmware.
        If it not helped post updated Support Archive.

        Regards,
        Alexander Novikov
        Russia, Moscow
        • NevenR
          NevenR
          6 Posts
          ACCEPTED ANSWER

          Re: New 750 GB SATA in DS3300 Loss of Path Redundancy

          ‏2011-06-05T23:20:14Z  in response to Novikov_Alexander
          Update: Although purchased as dual-port drives, drives were single-port. Customer will get replacement drives after 10 months.
          • 7P0S_Evgeniy_Shvarev
            1 Post
            ACCEPTED ANSWER

            Re: New 750 GB SATA in DS3300 Loss of Path Redundancy

            ‏2013-12-16T06:59:00Z  in response to NevenR

            Hello all, I am from NorilskNickel. Two months ago we receive 14 drives from our warehouse (it mean that they can located on warehouse a lot of time) with IBM option 43W7580, FRU 43W7583, P/N 43W7658 and we have the same problem - "Loss of Path Redundancy". It means that those 14 drives is for DS with single controller. We update firmware and NVsram but of couse it not help for us.

            Some body help me is it posible to change this drives in IBM?