Topic
6 replies Latest Post - ‏2012-11-18T05:39:39Z by NILAY97
SystemAdmin
SystemAdmin
6772 Posts
ACCEPTED ANSWER

Pinned topic Connection Error

‏2010-09-29T22:51:14Z |
Hi
we are using XI503.8.1.5
I created a webservice proxy for the backeend service. If we test the service through SOAPUI using direct backend wsdl, we are getting response.
But if we test through datapower, we are getting network error.
Even the TCP Connection test is successful.

The debug logs are as follows:

09:35:23    ws-proxy    error    1236589          150.192.67.253    0x0113001c    wsgw (WSPservice): Connection error 09:35:23    ws-proxy    error    1236589         150.192.67.253    0x80e0012c    wsgw (WSPservice): Network Error on back side server https:
//xyz.com:7856/Taxes/sales 09:35:22    crypto        info    1236589         150.192.67.253    0x8060010b    valcred (Taxvalid_cred): certificate validation succeeded 

for 
'/O=xxxx/OU=xxxxxxx/CN=xxxxx' against 
'Taxvalid_cred' 09:35:22    ws-proxy    debug    1236589         150.192.67.253    0x80e00159    wsgw (WSPservice): Outbound HTTP on 

new TCP session using HTTP/1.1 to https:
//xyz.com:7856/Taxes/sales 09:35:22    ws-proxy    debug    1236589         150.192.67.253    0x80e00536    wsgw (WSPservice): HTTP Header-Retention:Compression Policy: Off, URL: /Taxes/sales 09:35:22    ws-proxy    debug    1236589         150.192.67.253    0x80e00536    wsgw (WSPservice): HTTP Header-Retention:Header-Retention Policy:MQMD = OFF. MQMD Header = (NULL), URL: https:
//xyz.com:7856/Taxes/sales 09:35:22    ws-proxy    debug    1236589         150.192.67.253    0x80e00536    wsgw (WSPservice): HTTP Header-Retention:Header-Retention Policy: Range = OFF. Range Header = (NULL), URL: https:
//xyz.com:7856/Taxes/sales 09:35:22    ws-proxy    debug    1236589         150.192.67.253    0x80e00536    wsgw (WSPservice): HTTP Header-Retention:Header-Retention Policy: Accept-Encoding = OFF. Accept-Encoding Header = gzip,deflate, URL: https:
//xyz.com:7856/Taxes/sales
Updated on 2012-11-18T05:39:39Z at 2012-11-18T05:39:39Z by NILAY97
  • mmatamoros
    mmatamoros
    60 Posts
    ACCEPTED ANSWER

    Re: Connection Error

    ‏2010-09-30T14:47:54Z  in response to SystemAdmin
    If I understand correctly the logs you attached it seems that the settings for the backside server are not properly setup. Also does the backend authenticate through certificate? maybe you are not sendind the certificate to the backend.

    That's some ideas to try.
    • SystemAdmin
      SystemAdmin
      6772 Posts
      ACCEPTED ANSWER

      Re: Connection Error

      ‏2010-09-30T21:38:18Z  in response to mmatamoros
      It is 1-way ssl. I doesnt need to send cert.
      Even we tried in diff domain, but still same problem is showing up.

      I can access the backend wsdl and I'm getting response from soapui
    • SystemAdmin
      SystemAdmin
      6772 Posts
      ACCEPTED ANSWER

      Re: Connection Error

      ‏2010-09-30T21:38:19Z  in response to mmatamoros
      It is 1-way ssl. I doesnt need to send cert.
      Even we tried in diff domain, but still same problem is showing up.

      I can access the backend wsdl and I'm getting response from soapui
  • abhee
    abhee
    8 Posts
    ACCEPTED ANSWER

    Re: Connection Error

    ‏2010-10-01T06:16:13Z  in response to SystemAdmin
    Hi,

    As you are mentioning that the Network is fine and code is OK.

    Please check the configuration at giving the backed URL/URI.

    I mean check all the DP service Object configuration Once.

    Abhee
  • SystemAdmin
    SystemAdmin
    6772 Posts
    ACCEPTED ANSWER

    Re: Connection Error

    ‏2010-10-08T22:00:09Z  in response to SystemAdmin
    It was a certificate error. I rectified it .

    Thanks
  • NILAY97
    NILAY97
    203 Posts
    ACCEPTED ANSWER

    Re: Connection Error

    ‏2012-11-18T05:39:39Z  in response to SystemAdmin
    Hi Vichare,

    I'am getting the same error as you were getting. Same error logs which you have posted above.

    Could you please help me as how did you fix that?

    Its urgent. Pls Help.