My cluster (CSM 126.96.36.199, RHEL5.4) has been running with a single subnet - 10.2.130.0/23. During the weekend, we added another subnet (10.2.158.0/23). The CSM master has interfaces on both subnets. Today I did a csmsetupinstall on a node that has been on the 10.2.130.0 subnet all along. Linux installed properly and the node knew its correct IP address, but its gateway was set to 10.2.158.2 (which is the correct gateway for the 158 subnet). It should have been set to 10.2.130.2. I ran csmsetupinstall with the -v option, and found a line where it said:
Running Command: /opt/csm/csmbin/makedhcp -v nodexxx.thisdomain.com Gateway=10.2.158.2 Nameservers=10.2.250.86,10.0.4.11 Netmask=255.255.254.0 2>&1
All the information there appears to be correct except for the Gateway. Am I doing something wrong here?
Pinned topic Problem with csmsetupinstall and new subnet
Answered question This question has been answered.
Unanswered question This question has not been answered yet.
Updated on 2010-09-09T02:57:24Z at 2010-09-09T02:57:24Z by SystemAdmin
SystemAdmin 110000D4XK476 Posts
Re: Problem with csmsetupinstall and new subnet2010-09-09T02:57:24ZThis is the accepted answer. This is the accepted answer.All you did is correct, only you need one update if your MS has two subnets.
That is to specify InstallAdapterGateway for your target node in the node attribute, for example:
chnode -n nodexxx.thisdomain.com InstallAdapterGateway=10.2.130.2
I think this can resolve your problem, anything more please feel free to let me know.