Topic
  • 11 replies
  • Latest Post - ‏2016-03-22T11:00:44Z by chennakesav .Gali
ManojkumarPhate
ManojkumarPhate
18 Posts

Pinned topic Need FAQ Datapower XI50

‏2010-05-11T10:13:13Z |
Hello all,

Please share Frequently Asked Questions for Datapower XI50.

Thanks,
Manojkumar
Updated on 2010-05-26T06:42:12Z at 2010-05-26T06:42:12Z by ManojkumarPhate
  • ManojkumarPhate
    ManojkumarPhate
    18 Posts

    Re: Need FAQ Datapower XI50

    ‏2010-05-26T06:42:12Z  
    Hello all,
    Please share Datapower Interview questions.

    Thanks in advance.

    Best Regards,
    Manojkumar
  • MadhuriH
    MadhuriH
    1 Post

    Re: Need FAQ Datapower XI50

    ‏2013-06-24T09:42:17Z  

    Hi Manoj,

    I recently had an interview. Here are some of the questions. I hope its helpful

    Q1:What is DataPower? Which box are you currently working on?

    Q2:What does XI50 stands for? How is better compared to XA32 and XS40?

    Q3:What are the Action types used in previous project?

    Q4.What is an own error action in XI50?

    Q5.How does AAA action work>

    Q6.Can you have mainframe as a backend ? which protocol will you use to pass the messages?

    Q7.Difference between WSP and MPG's?

    Q8:What is XML Manager in XI50?

    Q9.How do you write an error rule?

    Q10:How do you rate yourself in XSLT?

     

    Thanks,

    Madhuri

  • vamshe58
    vamshe58
    1 Post

    Re: HI i Need FAQ Datapower XI50

    ‏2013-08-15T17:58:16Z  
    • MadhuriH
    • ‏2013-06-24T09:42:17Z

    Hi Manoj,

    I recently had an interview. Here are some of the questions. I hope its helpful

    Q1:What is DataPower? Which box are you currently working on?

    Q2:What does XI50 stands for? How is better compared to XA32 and XS40?

    Q3:What are the Action types used in previous project?

    Q4.What is an own error action in XI50?

    Q5.How does AAA action work>

    Q6.Can you have mainframe as a backend ? which protocol will you use to pass the messages?

    Q7.Difference between WSP and MPG's?

    Q8:What is XML Manager in XI50?

    Q9.How do you write an error rule?

    Q10:How do you rate yourself in XSLT?

     

    Thanks,

    Madhuri

     Hi,

    Madhuri i need ti talk with you regauding datapower xi50 appliance 

     

    MY MAIL ID: vamshe58@gmail.com

    replay me

     

     

  • swlinn
    swlinn
    1395 Posts

    Re: Need FAQ Datapower XI50

    ‏2013-08-15T18:56:06Z  
    Hello all,
    Please share Datapower Interview questions.

    Thanks in advance.

    Best Regards,
    Manojkumar

    Perhaps the IBM website might give the high level information you're seeking:  http://www-03.ibm.com/software/products/us/en/datapower-xi52  The Xi-52 is a follow-on to the XI-50 but provide the same functionality, albeit the XI-52 has more memory, faster processor, etc.

    Regards,

    Steve

  • ManojkumarPhate
    ManojkumarPhate
    18 Posts

    Re: Need FAQ Datapower XI50

    ‏2013-08-15T23:25:37Z  
    • swlinn
    • ‏2013-08-15T18:56:06Z

    Perhaps the IBM website might give the high level information you're seeking:  http://www-03.ibm.com/software/products/us/en/datapower-xi52  The Xi-52 is a follow-on to the XI-50 but provide the same functionality, albeit the XI-52 has more memory, faster processor, etc.

    Regards,

    Steve

    Hi Steve,

    Many thanks for your reply.

    I had gone through the Datapower XI52 related documents. I am asking FAQ here because for any Datapower profile what type of question should we ask. It will be better if you provide the list of questions.

     

    Regards,

    Manojkumar

  • ManojkumarPhate
    ManojkumarPhate
    18 Posts

    Re: Need FAQ Datapower XI50

    ‏2013-08-15T23:26:19Z  
    • MadhuriH
    • ‏2013-06-24T09:42:17Z

    Hi Manoj,

    I recently had an interview. Here are some of the questions. I hope its helpful

    Q1:What is DataPower? Which box are you currently working on?

    Q2:What does XI50 stands for? How is better compared to XA32 and XS40?

    Q3:What are the Action types used in previous project?

    Q4.What is an own error action in XI50?

    Q5.How does AAA action work>

    Q6.Can you have mainframe as a backend ? which protocol will you use to pass the messages?

    Q7.Difference between WSP and MPG's?

    Q8:What is XML Manager in XI50?

    Q9.How do you write an error rule?

    Q10:How do you rate yourself in XSLT?

     

    Thanks,

    Madhuri

    Thanks Madhuri,

     

    Regards,

    Manojkumar

  • SriniDp
    SriniDp
    46 Posts

    Re: Need FAQ Datapower XI50

    ‏2013-08-16T02:42:13Z  

    Thanks Madhuri,

     

    Regards,

    Manojkumar

    Some More

     

    How  datapower is used  in your previous Project? 

    ESB or Secure Gateway ?

    What are  Authentication Systems You Integrated with Datapower?

    How You configured Crypto Objects?

    Explain about SSL?

    Difference between 1-way SSL and 2-Way SSL?

    What all the ways to troubleshoot?

    In Which you  zone you used  datapower in intranet or DMZ and Y?

    Have you worked on high traffic applications ?

    Have you worked on Logging mechanism in datapower?

    so  on and so forth..

     

     

     

     

  • Advyat
    Advyat
    11 Posts

    Re: Need FAQ Datapower XI50

    ‏2013-08-16T03:46:35Z  

    Hi Manoj,

     

    Few of my friends replied you with some nice questions in Datapower.

    But Please try to look into below mentioned topics too:

    . Variables in DataPower (local, context, service and system) what is the scope and life time.

    . How you perform monitoring and maintain SLAs in Datapower. (monitors and SLM)

    . Try to remember few service variable names along with their purpose.

    . Datapower integration with MQ (use of Multi protocol Gateway here).

    . How you handle Binary data in Datapower.(use of ffd files)

    . How xml threat protection is achieved in Datapower.

    . Datapower extension function and variables.

    . Request and Response types supported by DataPower.

    . Memory Management 

    . AAA is very important (especially stuffs related to tokens LTPA, kerberos)

     

    regards,

    Abhinav

     

  • pikilu
    pikilu
    16 Posts

    Re: Need some answer asap

    ‏2014-06-17T13:24:02Z  
    • Advyat
    • ‏2013-08-16T03:46:35Z

    Hi Manoj,

     

    Few of my friends replied you with some nice questions in Datapower.

    But Please try to look into below mentioned topics too:

    . Variables in DataPower (local, context, service and system) what is the scope and life time.

    . How you perform monitoring and maintain SLAs in Datapower. (monitors and SLM)

    . Try to remember few service variable names along with their purpose.

    . Datapower integration with MQ (use of Multi protocol Gateway here).

    . How you handle Binary data in Datapower.(use of ffd files)

    . How xml threat protection is achieved in Datapower.

    . Datapower extension function and variables.

    . Request and Response types supported by DataPower.

    . Memory Management 

    . AAA is very important (especially stuffs related to tokens LTPA, kerberos)

     

    regards,

    Abhinav

     

    thanks advyat,

    can you just provide some answer for your above mentioned questions

    like q no 3 ,q no5 and q no7

    i am preparing myself for an datapower interview so reply here or you can send me to my mail

    my mail id is . priyabrata.naik@gmail.com

  • pikilu
    pikilu
    16 Posts

    Re: Need an answer

    ‏2014-06-17T16:43:47Z  
    • MadhuriH
    • ‏2013-06-24T09:42:17Z

    Hi Manoj,

    I recently had an interview. Here are some of the questions. I hope its helpful

    Q1:What is DataPower? Which box are you currently working on?

    Q2:What does XI50 stands for? How is better compared to XA32 and XS40?

    Q3:What are the Action types used in previous project?

    Q4.What is an own error action in XI50?

    Q5.How does AAA action work>

    Q6.Can you have mainframe as a backend ? which protocol will you use to pass the messages?

    Q7.Difference between WSP and MPG's?

    Q8:What is XML Manager in XI50?

    Q9.How do you write an error rule?

    Q10:How do you rate yourself in XSLT?

     

    Thanks,

    Madhuri

    thanks Madhurih,

       i need an answer of your question.

     for that mainframe backend which protocol have to use to pass the message

  • chennakesav .Gali
    chennakesav .Gali
    2 Posts

    Re: Need FAQ Datapower XI50

    ‏2016-03-22T11:00:44Z  

    Hi everyone this is chennakesav..i have learnt datapower xi52admin/development/support.still i am waiting for the job.can you please give me the reference to me is any openings in your company

    interview questions:

    1.which version of appliance you are used?

           A. Data power xi52(6.0.1.0)

    2.How many ports are available in your appliance?

            A. total 12 ports.10 ports are ethernet ports(8 1gb  and 2 10gb ports).

    and 2 ports are management ports

    3.what is application domain?

     A.application domain allows the administrators to partition an appliance into multiple logical configurations.for example the developers and production employees environment is different

    4.how to do appliance setup and initialization in vmware?

    A. 1. Download the vmware in required website

         2.after downloading start the vmplayer then click on edit virtual settings then set the memory as 4gb then press select.

         4.click on player ->file->upload->datapowerovi file(software)

         5.dont press the escape untill the login screen will appeared on the screen

         6.give the username and password

         7.then it ask enter disastor recovery mode:y/n?yes

         8.Enter comman compatibility mode:y/n?no

         9.it ask new password and confirm password

         10.Do u want run install wizard:no

                then it displays xi52(config)

          11.type (co)

          12.show eth (it is used to see the what are the what are the ethernet ports are available)

          13.int eth0(to configure eth0(if eth 0 is available))

                  14.ip address 192.168.1.25 255.255.255.0(please goto comand prompt in that enter ipconfig command it displays ipdefault gateway and subnet mask.my default gate way                                          is(192.168.1.1) so i configure the ip as 192.168.1.25)

        15.

          ip default-gateway 192.168.1.1 

          16.exit

          17.web-mgmt 192.168.1.25  9090

         18.ssh 192.168.1.25  22

         19.write memory

     

    5.How to take healthcheck?

    A. goto control panel->cpu usage

                  control panel->Domain memory usage

                   control panel->SYstem memory usage

    6.how to take a secure backup and restore?

    A. for doing secure back up and restore first of all take the some precautions:those are

               1.check all the objects are saved are not  otherwise do saveit.

                2.please keep require certificate and matching key to take with you

     then goto control panel->crypto tools->click on generate key->give countryname,state,must and shood give the (comman name)this coman name is the certificate name)->generate key

    ->then the pop up is appeared that is the key and certificates are generated in cert and temporary directory

    ->then goto file management click on temporary directory and save the cert and key to the required location.then goto shared cert folder upload these key and cert in that.

     

    if u have pdf files contact chennakesavulu100@gmail.com i will send remaining questions and pdfs also

    (Please refer me if possible)