Topic
  • 8 replies
  • Latest Post - ‏2013-05-23T05:03:25Z by Novikov_Alexander
Audilemans
Audilemans
8 Posts

Pinned topic DS3400 Start-of-day routine begun

‏2010-01-11T14:35:14Z |
Hi all,
I have this event (Event type: 2606 Description: Start-of-day routine begun) in the event log of our DS3400.
As I know, this procedure is executed when the controller is restarted. This cause timeout problems to the host (WS2003 + Oracle).
How to fix it?

Notes:
This DS3400 have latest firmware.
This DS3400 recently upgraded from single-controller to dual controller.

Thanks in advance.

Andrey
Updated on 2010-01-13T15:14:56Z at 2010-01-13T15:14:56Z by Audilemans
  • Novikov_Alexander
    Novikov_Alexander
    1404 Posts

    Re: DS3400 Start-of-day routine begun

    ‏2010-01-13T05:41:06Z  
    Dear Andrey,

    could you post DS3400 Support Archive.

    Regards,
    Alexander Novikov
    Russia, Moscow
  • Audilemans
    Audilemans
    8 Posts

    Re: DS3400 Start-of-day routine begun

    ‏2010-01-13T09:51:10Z  
    Dear Andrey,

    could you post DS3400 Support Archive.

    Regards,
    Alexander Novikov
    Russia, Moscow
    Dear Alexander,

    Support archive you can see in attached file.
    If it may helps, i can attach windows system log.

    Thanks in advance.

    Andrey Stefanovich
    Belarus, Minsk
  • Novikov_Alexander
    Novikov_Alexander
    1404 Posts

    Re: DS3400 Start-of-day routine begun

    ‏2010-01-13T13:09:11Z  
    Dear Alexander,

    Support archive you can see in attached file.
    If it may helps, i can attach windows system log.

    Thanks in advance.

    Andrey Stefanovich
    Belarus, Minsk
    Hi Andrey,

    do you realy have one server with two 2-ports FC HBAs and OS Windows 2003/8 with Veritas DMP software installed? Could you confirm.

    Regards,
    Alexander Novikov
    Russia, Moscow
  • Audilemans
    Audilemans
    8 Posts

    Re: DS3400 Start-of-day routine begun

    ‏2010-01-13T14:35:19Z  
    Hi Andrey,

    do you realy have one server with two 2-ports FC HBAs and OS Windows 2003/8 with Veritas DMP software installed? Could you confirm.

    Regards,
    Alexander Novikov
    Russia, Moscow
    Hi Alexander,

    we have one server with two 2-ports FC HBA (it's may be ok - see http://www-03.ibm.com/systems/resources/systems_storage_disk_ds3000_pdf_config.pdf on page 25) and OS Windows Server 2003. We don't use Veritas DMP.

    As I understand, You mean that controller reboots because of an wrong host type specified? ("Windows Server 2003/Server 2008 Non-Clustered" index 2 instead of "Windows Server 2003/Server 2008 Non-Clustered (supports DMP)" index 9)

    Thanks in advance.

    Andrey Stefanovich
    Belarus, Minsk
  • Novikov_Alexander
    Novikov_Alexander
    1404 Posts

    Re: DS3400 Start-of-day routine begun

    ‏2010-01-13T14:51:43Z  
    Hi Alexander,

    we have one server with two 2-ports FC HBA (it's may be ok - see http://www-03.ibm.com/systems/resources/systems_storage_disk_ds3000_pdf_config.pdf on page 25) and OS Windows Server 2003. We don't use Veritas DMP.

    As I understand, You mean that controller reboots because of an wrong host type specified? ("Windows Server 2003/Server 2008 Non-Clustered" index 2 instead of "Windows Server 2003/Server 2008 Non-Clustered (supports DMP)" index 9)

    Thanks in advance.

    Andrey Stefanovich
    Belarus, Minsk
    Andrey,

    I guess that it can be a source of problem, but I am not sure.
    First of all set the correct host type and if it not helped call to your local IBM HW Support and open a warranty case.

    Regards,
    Alexander Novikov
    Russia, Moscow
  • Audilemans
    Audilemans
    8 Posts

    Re: DS3400 Start-of-day routine begun

    ‏2010-01-13T15:14:56Z  
    Andrey,

    I guess that it can be a source of problem, but I am not sure.
    First of all set the correct host type and if it not helped call to your local IBM HW Support and open a warranty case.

    Regards,
    Alexander Novikov
    Russia, Moscow
    Alexander,

    many thanks for help!

    Thanks in advance.

    Andrey Stefanovich
    Belarus, Minsk
  • eugene17rus
    eugene17rus
    1 Post

    Re: DS3400 Start-of-day routine begun

    ‏2013-05-16T06:47:35Z  
    Alexander,

    many thanks for help!

    Thanks in advance.

    Andrey Stefanovich
    Belarus, Minsk

    Здравствуйте у меня такая же проблема отключается корзина:

    server with two 2-ports FC HBAs and OS Windows 2003/8, DS3400 

    прошивка контроллера:

    Current configuration
    Firmware version: 07.35.71.00
    Appware version: 07.35.71.00
    Bootware version: 07.35.71.00
    NVSRAM version: N1726D340R335V09

    Host: SQLSERVER
    Host type: Windows Server 2003/Server 2008 Non-Clustered
    Host port identifier: 10:00:00:00:c9:73:c3:be
    Alias: SQLSERVER0
    Host type: Windows Server 2003/Server 2008 Non-Clustered
    Host port identifier: 10:00:00:00:c9:73:c3:4a
    Alias: SQLSERVER1

    Подскажите что мне делать?

  • Novikov_Alexander
    Novikov_Alexander
    1404 Posts

    Re: DS3400 Start-of-day routine begun

    ‏2013-05-23T05:03:25Z  

    Здравствуйте у меня такая же проблема отключается корзина:

    server with two 2-ports FC HBAs and OS Windows 2003/8, DS3400 

    прошивка контроллера:

    Current configuration
    Firmware version: 07.35.71.00
    Appware version: 07.35.71.00
    Bootware version: 07.35.71.00
    NVSRAM version: N1726D340R335V09

    Host: SQLSERVER
    Host type: Windows Server 2003/Server 2008 Non-Clustered
    Host port identifier: 10:00:00:00:c9:73:c3:be
    Alias: SQLSERVER0
    Host type: Windows Server 2003/Server 2008 Non-Clustered
    Host port identifier: 10:00:00:00:c9:73:c3:4a
    Alias: SQLSERVER1

    Подскажите что мне делать?

    Dear  вася,

    could you post DS3400 Support Archive.

    Regards,
    Alexander Novikov
    Russia, Moscow

    FYI, if you prefer your native language you can use russian  IBM Forum:

    Системы хранения данных IBM
    https://www.ibm.com/developerworks/community/forums/html/forum?id=11111111-0000-0000-0000-000000001443