Topic
  • 7 replies
  • Latest Post - ‏2013-03-19T20:44:37Z by SystemAdmin
SystemAdmin
SystemAdmin
24948 Posts

Pinned topic [clearquest] How can we trigger an email alert from CQ after one hour of defect submission

‏2008-09-16T11:09:37Z |
Hi All,

How can we trigger an email alert from ClearQuest after one hour of
defect submission (ie Escalation if no action changes after one hour of
defect submission)

Please assist me

Regards,

Sneha Reddy R
Please do not print this email unless it is absolutely necessary.

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com
_______________________________________________
clearquest mailing list
clearquest@lists.ca.ibm.com
Unsubscribe:clearquest-leave@lists.ca.ibm.com
  • SystemAdmin
    SystemAdmin
    24948 Posts

    RE: [clearquest] How can we trigger an email alert from CQ after onehour of defect submission

    ‏2008-09-16T11:39:32Z  
    You can not.
    Run a script (every 10 minutes) that will fetch records (base on a
    query?) and analyze the data
    like submit ion date, state, history etc... and decide if an Email will
    be sent.
    The Email should be sent by the script!
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com <http://www.corrigent.com/>
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786

    ________________________________

    From: clearquest-bounces@lists.ca.ibm.com
    mailto:clearquest-bounces@lists.ca.ibm.com On Behalf Of
    sneha.reddy@wipro.com
    Sent: 08/09/16 14:10 PM
    To: clearquest@lists.ca.ibm.com
    Subject: clearquest How can we trigger an email alert from CQ
    after onehour of defect submission

    Hi All,

    How can we trigger an email alert from ClearQuest after one hour
    of defect submission (ie Escalation if no action changes after one hour
    of defect submission)

    Please assist me

    Regards,

    Sneha Reddy R

    Please do not print this email unless it is absolutely
    necessary.

    The information contained in this electronic message and any
    attachments to this message are intended for the exclusive use of the
    addressee(s) and may contain proprietary, confidential or privileged
    information. If you are not the intended recipient, you should not
    disseminate, distribute or copy this e-mail. Please notify the sender
    immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email. The
    recipient should check this email and any attachments for the presence
    of viruses. The company accepts no liability for any damage caused by
    any virus transmitted by this email.

    www.wipro.com

    _______________________________________________
    clearquest mailing list
    clearquest@lists.ca.ibm.com
    Unsubscribe:clearquest-leave@lists.ca.ibm.com
  • SystemAdmin
    SystemAdmin
    24948 Posts

    RE: [clearquest] How can we trigger an email alert from CQ after onehour of defect submission

    ‏2008-09-16T13:54:29Z  
    You can not.
    Run a script (every 10 minutes) that will fetch records (base on a
    query?) and analyze the data
    like submit ion date, state, history etc... and decide if an Email will
    be sent.
    The Email should be sent by the script!
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com <http://www.corrigent.com/>
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786

    ________________________________

    From: clearquest-bounces@lists.ca.ibm.com
    mailto:clearquest-bounces@lists.ca.ibm.com On Behalf Of
    sneha.reddy@wipro.com
    Sent: 08/09/16 14:10 PM
    To: clearquest@lists.ca.ibm.com
    Subject: clearquest How can we trigger an email alert from CQ
    after onehour of defect submission

    Hi All,

    How can we trigger an email alert from ClearQuest after one hour
    of defect submission (ie Escalation if no action changes after one hour
    of defect submission)

    Please assist me

    Regards,

    Sneha Reddy R

    Please do not print this email unless it is absolutely
    necessary.

    The information contained in this electronic message and any
    attachments to this message are intended for the exclusive use of the
    addressee(s) and may contain proprietary, confidential or privileged
    information. If you are not the intended recipient, you should not
    disseminate, distribute or copy this e-mail. Please notify the sender
    immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email. The
    recipient should check this email and any attachments for the presence
    of viruses. The company accepts no liability for any damage caused by
    any virus transmitted by this email.

    www.wipro.com

    _______________________________________________
    clearquest mailing list
    clearquest@lists.ca.ibm.com
    Unsubscribe:clearquest-leave@lists.ca.ibm.com
    Hi,

    Please could you be able to provide a sample script?

    Regards,

    Sneha Reddy R





    Project Engineer | Wipro Technologies | Hyderabad | Ph no:30797268

    ________________________________

    From: Yossi Sidi mailto:Yossis@corrigent.com
    Sent: Tuesday, September 16, 2008 5:10 PM
    To: Sneha Reddy r (WT01 - Computing and Storage IPG);
    clearquest@lists.ca.ibm.com
    Subject: RE: clearquest How can we trigger an email alert from CQ
    after onehour of defect submission

    You can not.

    Run a script (every 10 minutes) that will fetch records (base on a
    query?) and analyze the data

    like submit ion date, state, history etc... and decide if an Email will
    be sent.

    The Email should be sent by the script!
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com <http://www.corrigent.com/>
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786
    ________________________________
    From: clearquest-bounces@lists.ca.ibm.com
    mailto:clearquest-bounces@lists.ca.ibm.com On Behalf Of
    sneha.reddy@wipro.com
    Sent: 08/09/16 14:10 PM
    To: clearquest@lists.ca.ibm.com
    Subject: clearquest How can we trigger an email alert from CQ
    after onehour of defect submission

    Hi All,

    How can we trigger an email alert from ClearQuest after one hour
    of defect submission (ie Escalation if no action changes after one hour
    of defect submission)

    Please assist me

    Regards,

    Sneha Reddy R

    Please do not print this email unless it is absolutely
    necessary.

    The information contained in this electronic message and any
    attachments to this message are intended for the exclusive use of the
    addressee(s) and may contain proprietary, confidential or privileged
    information. If you are not the intended recipient, you should not
    disseminate, distribute or copy this e-mail. Please notify the sender
    immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email. The
    recipient should check this email and any attachments for the presence
    of viruses. The company accepts no liability for any damage caused by
    any virus transmitted by this email.

    www.wipro.com
    Please do not print this email unless it is absolutely necessary.

    The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

    www.wipro.com
    _______________________________________________
    clearquest mailing list
    clearquest@lists.ca.ibm.com
    Unsubscribe:clearquest-leave@lists.ca.ibm.com

    Attachments

  • SystemAdmin
    SystemAdmin
    24948 Posts

    RE: [clearquest] How can we trigger an email alert from CQ after onehour of defect submission

    ‏2008-09-16T14:39:18Z  
    Hi,

    Please could you be able to provide a sample script?

    Regards,

    Sneha Reddy R





    Project Engineer | Wipro Technologies | Hyderabad | Ph no:30797268

    ________________________________

    From: Yossi Sidi mailto:Yossis@corrigent.com
    Sent: Tuesday, September 16, 2008 5:10 PM
    To: Sneha Reddy r (WT01 - Computing and Storage IPG);
    clearquest@lists.ca.ibm.com
    Subject: RE: clearquest How can we trigger an email alert from CQ
    after onehour of defect submission

    You can not.

    Run a script (every 10 minutes) that will fetch records (base on a
    query?) and analyze the data

    like submit ion date, state, history etc... and decide if an Email will
    be sent.

    The Email should be sent by the script!
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com <http://www.corrigent.com/>
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786
    ________________________________
    From: clearquest-bounces@lists.ca.ibm.com
    mailto:clearquest-bounces@lists.ca.ibm.com On Behalf Of
    sneha.reddy@wipro.com
    Sent: 08/09/16 14:10 PM
    To: clearquest@lists.ca.ibm.com
    Subject: clearquest How can we trigger an email alert from CQ
    after onehour of defect submission

    Hi All,

    How can we trigger an email alert from ClearQuest after one hour
    of defect submission (ie Escalation if no action changes after one hour
    of defect submission)

    Please assist me

    Regards,

    Sneha Reddy R

    Please do not print this email unless it is absolutely
    necessary.

    The information contained in this electronic message and any
    attachments to this message are intended for the exclusive use of the
    addressee(s) and may contain proprietary, confidential or privileged
    information. If you are not the intended recipient, you should not
    disseminate, distribute or copy this e-mail. Please notify the sender
    immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email. The
    recipient should check this email and any attachments for the presence
    of viruses. The company accepts no liability for any damage caused by
    any virus transmitted by this email.

    www.wipro.com
    Please do not print this email unless it is absolutely necessary.

    The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

    www.wipro.com
    _______________________________________________
    clearquest mailing list
    clearquest@lists.ca.ibm.com
    Unsubscribe:clearquest-leave@lists.ca.ibm.com
    You have an example of query,
    VB script that fetch info (base on a query) and send Email.
    I run it every night.

    Just modify it according to your needs and have fun :)
    Quoted from an old mail of mine:-
    =============================
    I attached an example of CQ API + Email + Excel + chart + print format

    two sheets in a book,
    Sheet1 contains a report in A3 format, margin and column wide setting,
    Sheet2 contains a Pivot table and chart in A4 format.
    The script is not a "best VBS practice" but it gives an example of how
    to
    set
    print formatting features like selecting A3 for sheet 1 and A4 for
    sheet2,
    page margin, column wide ... (use print preview)
    charts, automatic Email, dates comparison etc.

    Attached:-
    the script CQ_Epstat2Zvikam.vbs.txt
    and Excel CQ_Epstat2ZvikaM.xls.txt
    REMOVE the ".txt" extension from files name.
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com <http://www.corrigent.com/>
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786

    ________________________________

    From: sneha.reddy@wipro.com mailto:sneha.reddy@wipro.com
    Sent: 08/09/16 16:54 PM
    To: Yossi Sidi; clearquest@lists.ca.ibm.com
    Subject: RE: clearquest How can we trigger an email alert from
    CQ after onehour of defect submission

    Hi,

    Please could you be able to provide a sample script?

    Regards,

    Sneha Reddy R





    Project Engineer | Wipro Technologies | Hyderabad | Ph
    no:30797268
    ________________________________
    From: Yossi Sidi mailto:Yossis@corrigent.com
    Sent: Tuesday, September 16, 2008 5:10 PM
    To: Sneha Reddy r (WT01 - Computing and Storage IPG);
    clearquest@lists.ca.ibm.com
    Subject: RE: clearquest How can we trigger an email alert from
    CQ after onehour of defect submission

    You can not.

    Run a script (every 10 minutes) that will fetch records (base on
    a query?) and analyze the data

    like submit ion date, state, history etc... and decide if an
    Email will be sent.

    The Email should be sent by the script!
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com <http://www.corrigent.com/>
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786
    ________________________________
    From: clearquest-bounces@lists.ca.ibm.com
    mailto:clearquest-bounces@lists.ca.ibm.com On Behalf Of
    sneha.reddy@wipro.com
    Sent: 08/09/16 14:10 PM
    To: clearquest@lists.ca.ibm.com
    Subject: clearquest How can we trigger an email alert
    from CQ after onehour of defect submission

    Hi All,

    How can we trigger an email alert from ClearQuest after
    one hour of defect submission (ie Escalation if no action changes after
    one hour of defect submission)

    Please assist me

    Regards,

    Sneha Reddy R

    Please do not print this email unless it is absolutely
    necessary.

    The information contained in this electronic message and
    any attachments to this message are intended for the exclusive use of
    the addressee(s) and may contain proprietary, confidential or privileged
    information. If you are not the intended recipient, you should not
    disseminate, distribute or copy this e-mail. Please notify the sender
    immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email.
    The recipient should check this email and any attachments for the
    presence of viruses. The company accepts no liability for any damage
    caused by any virus transmitted by this email.

    www.wipro.com

    Please do not print this email unless it is absolutely
    necessary.

    The information contained in this electronic message and any
    attachments to this message are intended for the exclusive use of the
    addressee(s) and may contain proprietary, confidential or privileged
    information. If you are not the intended recipient, you should not
    disseminate, distribute or copy this e-mail. Please notify the sender
    immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email. The
    recipient should check this email and any attachments for the presence
    of viruses. The company accepts no liability for any damage caused by
    any virus transmitted by this email.

    www.wipro.com

    _______________________________________________
    clearquest mailing list
    clearquest@lists.ca.ibm.com
    Unsubscribe:clearquest-leave@lists.ca.ibm.com

    Attachment not added (too many attachments): "display-editor.JPG"
    Attachment not added (too many attachments): "query-editor.JPG"
    Attachment not added (too many attachments): "CQ_Epstat-demo.xls.txt"
  • alan_scm
    alan_scm
    61 Posts

    Re: [clearquest] How can we trigger an email alert from CQ after one hour of defect submission

    ‏2008-09-16T16:28:54Z  
    Hi Yossi,

    How to execute the give script , i know about the perl , from command line you can execute, but i am not aware of VB can you please tell how you execute it.

    Thanks,
    Alan.
  • SystemAdmin
    SystemAdmin
    24948 Posts

    RE: [clearquest] How can we trigger an email alert from CQ afterone hour of defect submission

    ‏2008-09-16T16:33:51Z  
    • alan_scm
    • ‏2008-09-16T16:28:54Z
    Hi Yossi,

    How to execute the give script , i know about the perl , from command line you can execute, but i am not aware of VB can you please tell how you execute it.

    Thanks,
    Alan.
    Hi,
    If you run it from the DOS prompt just type the
    DRIVE:\PATH\SCRIPT_NAME.vbs

    or from a scheduler, for example:
    "C:\WINNT\System32\WScript.exe" D:\gdaily\CQ_Equery.vbs
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786
    >-----Original Message-----
    >From: clearquest-bounces@lists.ca.ibm.com
    >mailto:clearquest-bounces@lists.ca.ibm.com On Behalf Of clearquest
    >Sent: 08/09/16 19:29 PM
    >To: clearquest@lists.ca.ibm.com
    >Subject: Re: clearquest How can we trigger an email alert
    >from CQ afterone hour of defect submission
    >
    >Hi Yossi,
    >
    >
    >
    >How to execute the give script , i know about the perl , from
    >command line you can execute, but i am not aware of VB can you
    >please tell how you execute it.
    >
    >
    >
    >Thanks,
    >
    >Alan.
    >

    _______________________________________________
    clearquest mailing list
    clearquest@lists.ca.ibm.com
    Unsubscribe:clearquest-leave@lists.ca.ibm.com
  • alan_scm
    alan_scm
    61 Posts

    Re: RE: [clearquest] How can we trigger an email alert from CQ afterone hour of defect submission

    ‏2008-09-16T17:35:10Z  
    Hi,
    If you run it from the DOS prompt just type the
    DRIVE:\PATH\SCRIPT_NAME.vbs

    or from a scheduler, for example:
    "C:\WINNT\System32\WScript.exe" D:\gdaily\CQ_Equery.vbs
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786
    >-----Original Message-----
    >From: clearquest-bounces@lists.ca.ibm.com
    >mailto:clearquest-bounces@lists.ca.ibm.com On Behalf Of clearquest
    >Sent: 08/09/16 19:29 PM
    >To: clearquest@lists.ca.ibm.com
    >Subject: Re: clearquest How can we trigger an email alert
    >from CQ afterone hour of defect submission
    >
    >Hi Yossi,
    >
    >
    >
    >How to execute the give script , i know about the perl , from
    >command line you can execute, but i am not aware of VB can you
    >please tell how you execute it.
    >
    >
    >
    >Thanks,
    >
    >Alan.
    >

    _______________________________________________
    clearquest mailing list
    clearquest@lists.ca.ibm.com
    Unsubscribe:clearquest-leave@lists.ca.ibm.com
    Thanks yossi,

    for the information.
    Alan.
  • SystemAdmin
    SystemAdmin
    24948 Posts

    Re: RE: [clearquest] How can we trigger an email alert from CQ after onehour of defect submission

    ‏2013-03-19T20:44:37Z  
    You have an example of query,
    VB script that fetch info (base on a query) and send Email.
    I run it every night.

    Just modify it according to your needs and have fun :)
    Quoted from an old mail of mine:-
    =============================
    I attached an example of CQ API + Email + Excel + chart + print format

    two sheets in a book,
    Sheet1 contains a report in A3 format, margin and column wide setting,
    Sheet2 contains a Pivot table and chart in A4 format.
    The script is not a "best VBS practice" but it gives an example of how
    to
    set
    print formatting features like selecting A3 for sheet 1 and A4 for
    sheet2,
    page margin, column wide ... (use print preview)
    charts, automatic Email, dates comparison etc.

    Attached:-
    the script CQ_Epstat2Zvikam.vbs.txt
    and Excel CQ_Epstat2ZvikaM.xls.txt
    REMOVE the ".txt" extension from files name.
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com <http://www.corrigent.com/>
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786

    ________________________________

    From: sneha.reddy@wipro.com mailto:sneha.reddy@wipro.com
    Sent: 08/09/16 16:54 PM
    To: Yossi Sidi; clearquest@lists.ca.ibm.com
    Subject: RE: clearquest How can we trigger an email alert from
    CQ after onehour of defect submission

    Hi,

    Please could you be able to provide a sample script?

    Regards,

    Sneha Reddy R





    Project Engineer | Wipro Technologies | Hyderabad | Ph
    no:30797268
    ________________________________
    From: Yossi Sidi mailto:Yossis@corrigent.com
    Sent: Tuesday, September 16, 2008 5:10 PM
    To: Sneha Reddy r (WT01 - Computing and Storage IPG);
    clearquest@lists.ca.ibm.com
    Subject: RE: clearquest How can we trigger an email alert from
    CQ after onehour of defect submission

    You can not.

    Run a script (every 10 minutes) that will fetch records (base on
    a query?) and analyze the data

    like submit ion date, state, history etc... and decide if an
    Email will be sent.

    The Email should be sent by the script!
    Best Regards,
    Yossi Sidi
    Corrigent Systems Ltd.
    126 Yig'al Allon St.
    Tel Aviv 67443 Israel
    E-mail: mailto:yossis@corrigent.com
    Web Site: http://www.corrigent.com <http://www.corrigent.com/>
    Office: +972 3 6948 612
    Fax: +972 3 695 3222
    Mobile: +972 54 4748 795
    Home: +972 8 971 4786
    ________________________________
    From: clearquest-bounces@lists.ca.ibm.com
    mailto:clearquest-bounces@lists.ca.ibm.com On Behalf Of
    sneha.reddy@wipro.com
    Sent: 08/09/16 14:10 PM
    To: clearquest@lists.ca.ibm.com
    Subject: clearquest How can we trigger an email alert
    from CQ after onehour of defect submission

    Hi All,

    How can we trigger an email alert from ClearQuest after
    one hour of defect submission (ie Escalation if no action changes after
    one hour of defect submission)

    Please assist me

    Regards,

    Sneha Reddy R

    Please do not print this email unless it is absolutely
    necessary.

    The information contained in this electronic message and
    any attachments to this message are intended for the exclusive use of
    the addressee(s) and may contain proprietary, confidential or privileged
    information. If you are not the intended recipient, you should not
    disseminate, distribute or copy this e-mail. Please notify the sender
    immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email.
    The recipient should check this email and any attachments for the
    presence of viruses. The company accepts no liability for any damage
    caused by any virus transmitted by this email.

    www.wipro.com

    Please do not print this email unless it is absolutely
    necessary.

    The information contained in this electronic message and any
    attachments to this message are intended for the exclusive use of the
    addressee(s) and may contain proprietary, confidential or privileged
    information. If you are not the intended recipient, you should not
    disseminate, distribute or copy this e-mail. Please notify the sender
    immediately and destroy all copies of this message and any attachments.

    WARNING: Computer viruses can be transmitted via email. The
    recipient should check this email and any attachments for the presence
    of viruses. The company accepts no liability for any damage caused by
    any virus transmitted by this email.

    www.wipro.com

    _______________________________________________
    clearquest mailing list
    clearquest@lists.ca.ibm.com
    Unsubscribe:clearquest-leave@lists.ca.ibm.com

    Attachment not added (too many attachments): "display-editor.JPG"
    Attachment not added (too many attachments): "query-editor.JPG"
    Attachment not added (too many attachments): "CQ_Epstat-demo.xls.txt"
    Hi Yossi,

    I am unable to find the excel in the attachment. Please let me know how to download the same.

    Thanks
    Revathi Vijayaraghavan