Topic
5 replies Latest Post - ‏2007-06-29T15:46:16Z by KaiserSaeed
walterchen_austria
walterchen_austria
3 Posts
ACCEPTED ANSWER

Pinned topic network daemons

‏2007-06-28T13:48:04Z |
Hello! I am new to pave, just installed RHAS4U4 x86 on RHAS4U4-ppc . It all works very fine.
But I have a question: Can I create "virtual" network-interfaces , and bridge or route from ppc-host to x86world, so that I can run network daemons on x86-wold which serve for network clients

Thanks in advance
walter from austria
Updated on 2007-06-29T15:46:16Z at 2007-06-29T15:46:16Z by KaiserSaeed
  • KaiserSaeed
    KaiserSaeed
    25 Posts
    ACCEPTED ANSWER

    Re: network daemons

    ‏2007-06-28T19:56:20Z  in response to walterchen_austria
    Hi Walter -

    This is to acknowledge that we are looking into your question and will provide a reply soon.

    regards,
    Kaiser
    • SystemAdmin
      SystemAdmin
      90 Posts
      ACCEPTED ANSWER

      Re: network daemons

      ‏2007-06-28T20:54:39Z  in response to KaiserSaeed
      You do not need to do anything special. You can start a daemon in the x86-world just like you starts them on ppc-host. All your client programs can talk to the System p AVE daemons with out any problem.

      The only care you need to take is that the daemon running inside x86 world should not share the same port as a similar daemon running under ppc-host.

      Example:
      You can run Apache Http Server under ppc-host which runs on default port 80.
      Now you can also can run another copy Apache Http Server under pAVE but on a different port say like 8080.

      Hope this is something you are looking for.
      • walterchen_austria
        walterchen_austria
        3 Posts
        ACCEPTED ANSWER

        Re: network daemons

        ‏2007-06-29T04:17:58Z  in response to SystemAdmin
        > You do not need to do anything special. You can start
        > a daemon in the x86-world just like you starts them
        > on ppc-host. All your client programs can talk to the
        > System p AVE daemons with out any problem.
        >
        > The only care you need to take is that the daemon
        > running inside x86 world should not share the same
        > port as a similar daemon running under ppc-host.
        >
        > Example:
        > You can run Apache Http Server under ppc-host which
        > h runs on default port 80.
        > Now you can also can run another copy Apache Http
        > p Server under pAVE but on a different port say like
        > 8080.
        >
        > Hope this is something you are looking for.

        Hi!
        Yes, thank you, I already thought about this and it works fine. But for instance using ssh you always need to delete the entry in .ssh/known_hosts on the client side when using strict checking (which I would like to use).

        But thank you very much (for now it is a sufficient workaround)
        walter
    • walterchen_austria
      walterchen_austria
      3 Posts
      ACCEPTED ANSWER

      Re: network daemons

      ‏2007-06-29T04:20:54Z  in response to KaiserSaeed
      > Hi Walter -
      >
      > This is to acknowledge that we are looking into your
      > question and will provide a reply soon.
      >
      > regards,
      > Kaiser

      Hi Kaiser!
      Thank you for spending time with my question, it would be very nice, if you find an answer

      best regards walter
      • KaiserSaeed
        KaiserSaeed
        25 Posts
        ACCEPTED ANSWER

        Re: network daemons

        ‏2007-06-29T15:46:16Z  in response to walterchen_austria
        Walter, Hi - It is good to know that you now have a work around. Narender is in the same team as I am. So, the reply is actually going to come from him in this case.

        regards,
        Kaiser