Topic
3 replies Latest Post - ‏2005-04-19T04:28:56Z by SystemAdmin
SystemAdmin
SystemAdmin
835 Posts
ACCEPTED ANSWER

Pinned topic execute vocal application outside Voice Toolkit 5.1.0

‏2005-04-14T10:53:29Z |
I have a vocal application created with WSAD 5.1.2 and Voice Toolkit 5.1.0
with CTTS for the Italian language. I would want to know if it is possible
to execute it outside of the development environment and what serves in
order to make it?
I have do it for an application written in VXML 1.0 through Voice Server SDK
3.1.1 but I have not found a Voice Server for the Italian language that
interprets VXML 2.0.
Sorry for my bad english and thanks in advance.

Updated on 2005-04-19T04:28:56Z at 2005-04-19T04:28:56Z by SystemAdmin
  • SystemAdmin
    SystemAdmin
    835 Posts
    ACCEPTED ANSWER

    Re: execute vocal application outside Voice Toolkit 5.1.0

    ‏2005-04-16T00:47:10Z  in response to SystemAdmin
    To run a VoiceXML application, you'll need a VoiceXML Browser. One comes
    with the Voice toolkit, which you have been using. The only other one
    available from IBM would be part of our WebSphere Voice Server product,
    which is not free. It runs in a telephony environment - you would set up
    your application, and people would use phones to dial in and run the
    application.

    If this is what you are looking for, contact the local IBM office and they
    can give you more details, what it costs, what languages are supported, and
    so on.

    Thanks,
    Jeff

    "Nella" <antonella_santangelo@NOSPAMhotmail.com> wrote in message
    news:d3li3d$5uka$1@news.boulder.ibm.com...
    > I have a vocal application created with WSAD 5.1.2 and Voice Toolkit 5.1.0
    > with CTTS for the Italian language. I would want to know if it is
    possible
    > to execute it outside of the development environment and what serves in
    > order to make it?
    > I have do it for an application written in VXML 1.0 through Voice Server
    SDK
    > 3.1.1 but I have not found a Voice Server for the Italian language that
    > interprets VXML 2.0.
    > Sorry for my bad english and thanks in advance.
    >
    >

    • SystemAdmin
      SystemAdmin
      835 Posts
      ACCEPTED ANSWER

      Re: execute vocal application outside Voice Toolkit 5.1.0

      ‏2005-04-18T10:47:28Z  in response to SystemAdmin
      The VoiceXML Browser inside WebSphere Voice Server run only in a telephony
      environment?
      I need that my vocal application run on a PC or PDA.
      I've looked at multimodal tools but there aren't languages, other than
      English,
      supported in multimodal toolkit and browser.
      Sorry for my bad english and thanks in advance.
      "Jeff Kusnitz" <jk@us.ibm.com> ha scritto nel messaggio
      news:d3pn9v$6meg$1@news.boulder.ibm.com...
      > To run a VoiceXML application, you'll need a VoiceXML Browser. One comes
      > with the Voice toolkit, which you have been using. The only other one
      > available from IBM would be part of our WebSphere Voice Server product,
      > which is not free. It runs in a telephony environment - you would set up
      > your application, and people would use phones to dial in and run the
      > application.
      >
      > If this is what you are looking for, contact the local IBM office and they
      > can give you more details, what it costs, what languages are supported,
      > and
      > so on.
      >
      > Thanks,
      > Jeff
      >
      > "Nella" <antonella_santangelo@NOSPAMhotmail.com> wrote in message
      > news:d3li3d$5uka$1@news.boulder.ibm.com...
      >> I have a vocal application created with WSAD 5.1.2 and Voice Toolkit
      >> 5.1.0
      >> with CTTS for the Italian language. I would want to know if it is
      > possible
      >> to execute it outside of the development environment and what serves in
      >> order to make it?
      >> I have do it for an application written in VXML 1.0 through Voice Server
      > SDK
      >> 3.1.1 but I have not found a Voice Server for the Italian language that
      >> interprets VXML 2.0.
      >> Sorry for my bad english and thanks in advance.
      >>
      >>
      >
      >

      • SystemAdmin
        SystemAdmin
        835 Posts
        ACCEPTED ANSWER

        Re: execute vocal application outside Voice Toolkit 5.1.0

        ‏2005-04-19T04:28:56Z  in response to SystemAdmin
        Unfortunately, those are your choices - the VoiceXML browser on the desktop
        via the SDK, the telephony browser, or the multimodal browser.

        Jeff

        "Nella" <antonella_santangelo@NOSPAMhotmail.com> wrote in message
        news:d40388$3a8m$1@news.boulder.ibm.com...
        > The VoiceXML Browser inside WebSphere Voice Server run only in a telephony
        > environment?
        > I need that my vocal application run on a PC or PDA.
        > I've looked at multimodal tools but there aren't languages, other than
        > English,
        > supported in multimodal toolkit and browser.
        > Sorry for my bad english and thanks in advance.
        >
        >
        > "Jeff Kusnitz" <jk@us.ibm.com> ha scritto nel messaggio
        > news:d3pn9v$6meg$1@news.boulder.ibm.com...
        > > To run a VoiceXML application, you'll need a VoiceXML Browser. One
        comes
        > > with the Voice toolkit, which you have been using. The only other one
        > > available from IBM would be part of our WebSphere Voice Server product,
        > > which is not free. It runs in a telephony environment - you would set
        up
        > > your application, and people would use phones to dial in and run the
        > > application.
        > >
        > > If this is what you are looking for, contact the local IBM office and
        they
        > > can give you more details, what it costs, what languages are supported,
        > > and
        > > so on.
        > >
        > > Thanks,
        > > Jeff
        > >
        > > "Nella" <antonella_santangelo@NOSPAMhotmail.com> wrote in message
        > > news:d3li3d$5uka$1@news.boulder.ibm.com...
        > >> I have a vocal application created with WSAD 5.1.2 and Voice Toolkit
        > >> 5.1.0
        > >> with CTTS for the Italian language. I would want to know if it is
        > > possible
        > >> to execute it outside of the development environment and what serves in
        > >> order to make it?
        > >> I have do it for an application written in VXML 1.0 through Voice
        Server
        > > SDK
        > >> 3.1.1 but I have not found a Voice Server for the Italian language that
        > >> interprets VXML 2.0.
        > >> Sorry for my bad english and thanks in advance.
        > >>
        > >>
        > >
        > >
        >
        >