Topic
1 reply Latest Post - ‏2013-07-30T14:27:17Z by RDzJohn
zGuy
zGuy
5 Posts
ACCEPTED ANSWER

Pinned topic ZOSMF Configuration

‏2013-07-26T10:15:06Z |

Hi, 

I have recently installed RD&T v9 onto a native linux install. Furthermore, I am now attempting to install and configure the z/OS Management Facility thats comes with the RDTv9 distribution in three volumes. 

I have all volumes in place with the various target, distribution, and configuration asset files/pds. When running IZU130.ABBN7JCL(BBN7IZFS) to create and mount the ZFS dataset, I receive a JCL ERROR indicating my dataset can not be found.

Any thoughts or suggestions would be welcome and appreciated.

 

System Error Messages

********************************* TOP OF DATA **********************************

STMT NO. MESSAGE
16 IEFC001I PROCEDURE ALLOCZFS WAS EXPANDED USING INSTREAM PROCEDURE DEFI
ICH70001I WASINST  LAST ACCESS AT 02:50:31 ON FRIDAY, JULY 26, 2013
IEF236I ALLOC. FOR BBN7IZFS DEFZFS
IEF237I JES2 ALLOCATED TO SYSPRINT
IEF237I JES2 ALLOCATED TO SYSUDUMP
IEF237I JES2 ALLOCATED TO AMSDUMP
IEF237I JES2 ALLOCATED TO SYSIN
IEF237I 0AB0 ALLOCATED TO SYS00001
IEF285I     SYS13207.T025216.RA000.BBN7IZFS.R0100149     KEPT
IEF285I     VOL SER NOS= PUBLIC.
IEF142I BBN7IZFS DEFZFS - STEP WAS EXECUTED - COND CODE 0000
IEF285I    WASINST.BBN7IZFS.JOB00089.D0000102.?         SYSOUT
IEF285I    WASINST.BBN7IZFS.JOB00089.D0000103.?         SYSOUT
IEF285I    WASINST.BBN7IZFS.JOB00089.D0000104.?         SYSOUT
IEF285I    WASINST.BBN7IZFS.JOB00089.D0000101.?         SYSIN
IEF373I STEP/DEFZFS  /START 2013207.0252
IEF032I STEP/DEFZFS  /STOP  2013207.0252
              CPU:     0 HR  00 MIN  00.12 SEC    SRB:     0 HR  00 MIN  00.01 SEC
              VIRT:   332K  SYS:   260K  EXT:      108K  SYS:    11312K
IEF236I ALLOC. FOR BBN7IZFS ZFSROOT
IEF237I JES2 ALLOCATED TO SYSPRINT
IEF237I JES2 ALLOCATED TO STDOUT
IEF237I JES2 ALLOCATED TO STDERR
IEF237I JES2 ALLOCATED TO SYSUDUMP
IEF237I JES2 ALLOCATED TO CEEDUMP
IOEZ00004I Formatting to 8K block number 216000 for primary extent of
WASINST.WAS7.ZFS.
IOEZ00005I Primary extent loaded successfully for WASINST.WAS7.ZFS.
IOEZ00048I Detaching aggregate WASINST.WAS7.ZFS
IOEZ00048I Detaching aggregate WASINST.WAS7.ZFS
IEF142I BBN7IZFS ZFSROOT - STEP WAS EXECUTED - COND CODE 0000
IEF285I   WASINST.BBN7IZFS.JOB00089.D0000105.?         SYSOUT
IEF285I   WASINST.BBN7IZFS.JOB00089.D0000106.?         SYSOUT
IEF285I   WASINST.BBN7IZFS.JOB00089.D0000107.?         SYSOUT
IEF285I   WASINST.BBN7IZFS.JOB00089.D0000108.?         SYSOUT
IEF285I   WASINST.BBN7IZFS.JOB00089.D0000109.?         SYSOUT
IEF373I STEP/ZFSROOT /START 2013207.0252
IEF032I STEP/ZFSROOT /STOP  2013207.0253
CPU:     0 HR  00 MIN  01.63 SEC    SRB:     0 HR  00 MIN  00.31 SEC
VIRT:    28K  SYS:   248K  EXT:    28168K  SYS:    11848K
IEF212I BBN7IZFS IKJEFT1A ALLOCZ SYSEXEC - DATA SET NOT FOUND
IEF272I BBN7IZFS IKJEFT1A ALLOCZ - STEP WAS NOT EXECUTED.
 
IEF373I STEP/IKJEFT1A/START 2013207.0253
IEF032I STEP/IKJEFT1A/STOP  2013207.0253
CPU:     0 HR  00 MIN  00.00 SEC    SRB:     0 HR  00 MIN  00.00 SEC
VIRT:     0K  SYS:     0K  EXT:        0K  SYS:        0K
IEF375I  JOB/BBN7IZFS/START 2013207.0252
IEF033I  JOB/BBN7IZFS/STOP  2013207.0253
CPU:     0 HR  00 MIN  01.75 SEC    SRB:     0 HR  00 MIN  00.32 SEC
 

 

JCL (BBN7IZFS) to allocate the ZFS dataset that executes REXX script in (BBN7MTFS)

//********************************************************************
//*
//*
2 //ALLOCZFS  PROC   FSDSN=,
//          FSTYPE=,
//          DSPREFIX=,
//          PATHPREF=
//*
//IKJEFT1A EXEC PGM=IKJEFT1A,
//         PARM='BBN7MTFS &PATHPREF &FSDSN &FSTYPE'
//SYSEXEC  DD DSN=&DSPREFIX..HBBN700.F5,
//         DISP=SHR
//*SYSEXEC DD DSN=BBN.SBBN7JCL,DISP=SHR,
//*        UNIT=SYSALLDA,VOL=SER=tvol2
//SYSTSPRT DD SYSOUT=*
//SYSTSIN  DD DUMMY
//*
//EALLOC  PEND
//*
//*
3 //DEFZFS     EXEC PGM=IDCAMS
4 //SYSPRINT  DD SYSOUT=*
5 //SYSUDUMP  DD SYSOUT=*
6 //AMSDUMP   DD SYSOUT=*
7 //SYSIN     DD *
//*STORAGECLASS(XXXXXXX) -
//*MANAGEMENTCLASS(XXXXXXX) -
//*DATACLASS(XXXXXXX) -
//*-----------------------------------------------------------------*/
8 //IFROOT    IF DEFZFS.RC=0 THEN
9 //ZFSROOT   EXEC PGM=IOEAGFMT,REGION=0M,
//          PARM=('-aggregate WASINST.WAS7.ZFS -compat')
10 //SYSPRINT  DD SYSOUT=*
11 //STDOUT    DD SYSOUT=*
12 //STDERR    DD SYSOUT=*
13 //SYSUDUMP  DD SYSOUT=*
14 //CEEDUMP   DD SYSOUT=*
//*
15 //IFZROOT   IF ZFSROOT.RC=0 THEN
16 //ALLOCZ EXEC ALLOCZFS,
//          FSDSN=WASINST.WAS7.ZFS, * BBN.SBBN7FS IS THE DEFAULT
//          FSTYPE=ZFS,         * ZFS is the Default
//          DSPREFIX='IZU130', * NO DEFAULT; DSPREFIX in SMP CSI
//          PATHPREF='/'        * NO DEFAULT; PATH PREFIX OF MOUNTPOIN
17 ++ALLOCZFS  PROC   FSDSN=,
++          FSTYPE=,
++          DSPREFIX=,
++          PATHPREF=
++*
18 ++IKJEFT1A EXEC PGM=IKJEFT1A,
++         PARM='BBN7MTFS &PATHPREF &FSDSN &FSTYPE'
IEFC653I SUBSTITUTION JCL - PGM=IKJEFT1A,PARM='BBN7MTFS / WASINST.WAS7
19 ++SYSEXEC  DD DSN=&DSPREFIX..HBBN700.F5,
++         DISP=SHR
++*SYSEXEC DD DSN=BBN.SBBN7JCL,DISP=SHR,
++*        UNIT=SYSALLDA,VOL=SER=tvol2
IEFC653I SUBSTITUTION JCL - DSN=IZU130.HBBN700.F5,DISP=SHR
20 ++SYSTSPRT DD SYSOUT=*
21 ++SYSTSIN  DD DUMMY
++*
22 //          ENDIF
23 //          ENDIF
//*
******************************** BOTTOM OF DATA ********************************
 
 

 

 

The DSPrefix of IZU130.GLOABAL.CSI under the options parameter is IZU130

  • RDzJohn
    RDzJohn
    268 Posts
    ACCEPTED ANSWER

    Re: ZOSMF Configuration

    ‏2013-07-30T14:27:17Z  in response to zGuy

    Check to make sure you have a IZU130.HBBN700.F5 dataset on your system and available to the job.  This is what the JCL is complaining about.  If it isn't there, then most likely the SMPE install jobs placed it somewhere else and you will need to locate it.

     

    RDzJohn