Topic
17 replies Latest Post - ‏2013-05-10T13:12:52Z by pcon
pcon
pcon
26447 Posts
ACCEPTED ANSWER

Pinned topic 817928

‏2013-04-14T07:21:01Z |
typical content.
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:01Z  in response to pcon
    {"siteID":"1","body":"Two questions\n1) is the source of the rdfstore-joseki.jar available ?\n2) why Joseki, when its replaced by fuseki ?\n\nBart","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/BartvanLeeuwen","commentID":"1343102400000","author":"BartvanLeeuwen","subject":"test","time":"24 July 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:01Z  in response to pcon
    {"siteID":"1","body":"Bart,\n!DWAMP!gt;!DWAMP!gt;\nwhy Joseki, when its replaced by fuseki ?\n!DWAMP!gt;\nis the source of the rdfstore-joseki.jar available\n!DWAMP!lt;!DWAMP!lt;\nI see it is not. Will have it included","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/Mario Briggs","commentID":"1343102400000","author":"Mario Briggs","subject":"test","time":"24 July 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:01Z  in response to pcon
    {"siteID":"1","body":"Greate stuff! \nQuestion: why we should use:\n prop.setProperty(\"enableExtendedIndicators\", \"2\")\n?\nThanks!","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/VsV","commentID":"1343188800000","author":"VsV","subject":"test","time":"25 July 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:02Z  in response to pcon
    {"siteID":"1","body":"Mario,\nI would be very very very very interested in testing the Fuseki stuff !\nRight now we are just inches away from having a DB2 as a graph store integrated into our product.\nSince this is stil in innovation mode and early developement stages I would be more then happy to test and give feedback the Fuseki implementation. While you are at it, could you also use a up to date Jena version in the next release ? :)\n\nBart","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/BartvanLeeuwen","commentID":"1343275200000","author":"BartvanLeeuwen","subject":"test","time":"26 July 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:02Z  in response to pcon
    {"siteID":"1","body":"Bart,\nthanks for the info. Yes internally we are already on the new Apache JENA versions. Can you email me directly on my ID listed in the authors section :-)\n\nMario","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/Mario Briggs","commentID":"1343275200000","author":"Mario Briggs","subject":"test","time":"26 July 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:02Z  in response to pcon
    {"siteID":"1","body":"VSV,\n one of the delete statements we use has a problem between the JDBC driver and DB2 server if this is not turned off. There is a defect already opened with the respective IBM teams. Does it cause you any other problems having it turned OFF ?\n\nMario","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/Mario Briggs","commentID":"1343275200000","author":"Mario Briggs","subject":"test","time":"26 July 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:02Z  in response to pcon
    {"siteID":"1","body":"No, no other problems. Thank you, Mario!","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/VsV","commentID":"1343275200000","author":"VsV","subject":"test","time":"26 July 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:02Z  in response to pcon
    {"siteID":"1","body":"I've been working my way through the steps in Part 1, and I am stuck with a problem in IBM Data Studio (no previous experience with it). When I attempt to run the graph insertion application in debug mode I get \"cannot connect to VM.\" I am not finding anything in the DS help. DS is able to connect to the database outside the context of the application. Is there a forum for DS where I can get help?","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/aitkenhead","commentID":"1344484800000","author":"aitkenhead","subject":"test","time":"09 August 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:03Z  in response to pcon
    {"siteID":"1","body":"Paul Aitkenhead, \n\nIBM Data Studio is an Eclipse based product and in the context of this tutorial ,we are using Data studio , for running Java applications. Before running the Insert program , please ensure that you have no compilation errors in the programs. For this you can look at the \"Problems\" view. For opening the \"Problems\" view , you can navigate to Window !DWAMP!gt; Show View !DWAMP!gt; Problems on the top menubar. If you are seeing any errors in the problems view , then probably you have not set the Java build path right. Follow the steps 2 through 4 in the section \"Setting up the RDF application development environment \". \n\nIf you dont have any compilation errors in the Problems view , then you can run or debug InsertGraph.java , by selecting Run As !DWAMP!gt; Java application or Debug As !DWAMP!gt; Java application , after right clicking on the InsertGraph.java program. \n\nIf you are facing problems with connecting to the database , then please verify that the JDBC connection properties and credentials are correct with respect to the db2 database you are using.\n\nPlease let us know if this solves your problem or you are facing any other problems ?","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/priyaranjansahoo","commentID":"1344484800000","author":"priyaranjansahoo","subject":"test","time":"09 August 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:03Z  in response to pcon
    {"siteID":"1","body":"Hi Paul Aitkenhead,\n\n\"Cannot connect to VM \" seems to be a generic eclipse issue . So you can search on Eclipse forums or google for 'Eclipse debug mode cannot connect to VM\". You would get some good hits like \"http:\/\/www.eclipse.org\/forums\/index.php\/m\/302813\/\" and see if any of those helps.","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/priyaranjansahoo","commentID":"1344484800000","author":"priyaranjansahoo","subject":"test","time":"09 August 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:03Z  in response to pcon
    {"siteID":"1","body":"Instructions from the article were carefully verified. Testing the application for problems as you recommended reveals four unnecessary imports, but no errors. When insertGraph is run, it seems to finish quickly but with no visible artifact at all (no console output). If I then force the console to appear, it says \"!DWCURLYR!terminated] insertGraph\" at the top of the window, but the console is blank.\"\n\nThis is all on Win7 64-bit. I am going to try it on a different platform next.","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/aitkenhead","commentID":"1344571200000","author":"aitkenhead","subject":"test","time":"10 August 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:03Z  in response to pcon
    {"siteID":"1","body":"I installed Eclipse Classic on the same PC, used that instead of Data Studio, and everything started to work as described in te article.","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/aitkenhead","commentID":"1344657600000","author":"aitkenhead","subject":"test","time":"11 August 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:03Z  in response to pcon
    {"siteID":"1","body":"Mario, I follow the example, I can invoke query in java standalone application, but after I wrapper into WAS application, the query execution expose \"Not implemented\", but the query string is very simple like \"select * where !DWCURLYR!?s ?p ?o!DWCURLYL!\", my runtime is WAS 8.0.0.4. So you have any suggestion?","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/Jurson","commentID":"1354424400000","author":"Jurson","subject":"test","time":"02 December 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:03Z  in response to pcon
    {"siteID":"1","body":"Hi Jurson,\n\nWe need some more information to figure out the problem that you are facing. \n1. In your wrapper code can you tell us which factory is being used to create the QueryExecution instance. Is it the RdfStoreQueryExecutionFactory or QueryExecutionFactory ?\n2. Also can you please give us the stack trace of the exception that you are getting ?\n\nYou can email directly on my ID listed in the authors section in case there are issues with posting the stack trace in this section. \n\nThanks,\nPriya Ranjan Sahoo","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/priyaranjansahoo","commentID":"1354683600000","author":"priyaranjansahoo","subject":"test","time":"05 December 2012"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-14T07:21:04Z  in response to pcon
    {"siteID":"1","body":"Joseki is no longer being developed. It is being replaced with Apache Jena Fuseki. Some usage related content here: http:\/\/bit.ly\/YOhY4d","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/cogitoergosum","commentID":"1362546000000","author":"cogitoergosum","subject":"test","time":"06 March 2013"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-04-26T05:37:30Z  in response to pcon
    {"siteID":"1","body":"Yes, Apache Jena Fuseki is supported by DB2 from 10.1 FP2 - http:\/\/www.ibm.com\/developerworks\/data\/library\/techarticle\/dm-1303db2rdf\/","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/Mario Briggs","commentID":"1366954649749","author":"Mario Briggs","subject":"test","time":"26 April 2013"}
  • pcon
    pcon
    26447 Posts
    ACCEPTED ANSWER

    test

    ‏2013-05-10T13:12:52Z  in response to pcon
    {"siteID":"1","body":"Hello,\nwhen executing the createrdfstore command I am getting the following error:\n[jcc][t4][2057][11264][4.13.127] The application server rejected establishment of the connection.\nAn attempt was made to access a database, RDFSAMPL, which was either not found or does not support transactions. ERRORCODE=-4499, SQLSTATE=08004\nThe RDFSAMPL database does exist, the script setup.sql executed successfully, and I see it in the IBM data studio. I don't know what means the fact that the db might \"not support transactions\".\nAny help welcomed. I am not a DB2 expert...","contentID":"817928","profileurl":"https:\/\/www.ibm.com\/developerworks\/community\/profiles\/user\/mommeja","commentID":"1368191564585","author":"mommeja","subject":"test","time":"10 May 2013"}