Topic
  • 5 replies
  • Latest Post - ‏2013-11-07T20:46:03Z by MiklP
MiklP
MiklP
5 Posts

Pinned topic ASM Import File Failure During Analyze File

‏2013-11-05T14:50:38Z |

I created an assembler import file using DMHBALA from RAASync and copied it down to our RAA server after removing RAASync control cards.  RAA is version 6.0.0.10 and is installed on a Windows server. When using Collect Inventory to load the import file, the Analyze File step is queued during Postprocessing.  This step fails and the imported data is backed out.  The failure appears to be an error when attempting to access the mainframe PDS for the file.  If I manually skip this step, everything appears to be okay.  I haven't set up the mainframe communications yet, but my question is why is the Analyze File step queued and why does it need access to the mainframe file during Postprocessing since it is an import file?  Thanks.

  • jcdelmo
    jcdelmo
    347 Posts

    Re: ASM Import File Failure During Analyze File

    ‏2013-11-06T17:57:48Z  

    This is not the expected behavior.   RAA work item 42470 has been opened to track this issue.

  • boyerpl
    boyerpl
    199 Posts

    Re: ASM Import File Failure During Analyze File

    ‏2013-11-07T15:43:06Z  

    Importing the assembler file shouldn't cause any mainframe communication.  Could you post the log file that shows the failure?

  • MiklP
    MiklP
    5 Posts

    Re: ASM Import File Failure During Analyze File

    ‏2013-11-07T16:50:33Z  

    Attached are the logs.  I'm assuming the Postprocessor is attempting a mainframe connection in that the logs indicate the file is gone.  Import entries are in RAA until the Analzye File queue is run which removes them.

    In experimenting, I put the source in a local folder and pointed the LIBR card to this location.  Analyze File did not indicate the file was gone and the import entries remained, even though not all correct.  But, this further suggests that Analzye File is looking for the source.

    Attached are logs.  They contain only the new entries from the latest test performed for this reply.

    Thanks.

    Attachments

  • boyerpl
    boyerpl
    199 Posts

    Re: ASM Import File Failure During Analyze File

    ‏2013-11-07T19:16:04Z  
    • MiklP
    • ‏2013-11-07T16:50:33Z

    Attached are the logs.  I'm assuming the Postprocessor is attempting a mainframe connection in that the logs indicate the file is gone.  Import entries are in RAA until the Analzye File queue is run which removes them.

    In experimenting, I put the source in a local folder and pointed the LIBR card to this location.  Analyze File did not indicate the file was gone and the import entries remained, even though not all correct.  But, this further suggests that Analzye File is looking for the source.

    Attached are logs.  They contain only the new entries from the latest test performed for this reply.

    Thanks.

    This sounds like a problem that was fixed in V6.0.0.11.  See https://www.ibm.com/developerworks/community/forums/html/topic?id=77777777-0000-0000-0000-000014906828&ps=100

    • Loading any import file for an Assembler program results in LANGUAGE_CD='GONE' (37353)

    You'll need to move at least to V6.0.0.11 to correct that, but I would suggest getting on V6.1.0.1 so you have all the other fixes and enhancements that have occurred since V6.0.0.10.

  • MiklP
    MiklP
    5 Posts

    Re: ASM Import File Failure During Analyze File

    ‏2013-11-07T20:46:03Z  
    • boyerpl
    • ‏2013-11-07T19:16:04Z

    This sounds like a problem that was fixed in V6.0.0.11.  See https://www.ibm.com/developerworks/community/forums/html/topic?id=77777777-0000-0000-0000-000014906828&ps=100

    • Loading any import file for an Assembler program results in LANGUAGE_CD='GONE' (37353)

    You'll need to move at least to V6.0.0.11 to correct that, but I would suggest getting on V6.1.0.1 so you have all the other fixes and enhancements that have occurred since V6.0.0.10.

    Thanks, we'll pursue an upgrade to 6.1.0.1.