Topic
  • 3 replies
  • Latest Post - ‏2014-02-12T08:49:48Z by @Sharma~Pankaj
JavedAbdul
JavedAbdul
2 Posts

Pinned topic Configuring RLKS on windows server

‏2013-08-28T07:45:10Z |

Hello Team

We have a AVP client upgrading there ClearCase setup.

Can you please help me with step to configure the RLKS 8.1.3 on a windows environment ?

Thank you

Regards

Javed

  • Saurabh.Tyagi
    Saurabh.Tyagi
    1 Post
    ACCEPTED ANSWER

    Re: Configuring RLKS on windows server

    ‏2013-08-28T08:42:02Z  

    Hello Javed,

    Please find the list of steps mentioned below that is involved in manually configuring IBM Rational License Keys to the IBM Rational License Key Server:

    1. Edit the Permanent license key generated and downloaded from the license key center website
       
    2. Copy from the SERVER line until the end of the license file
       
    3. Navigate to Rational_server_perm.dat file located in the installation directory of the license server
      Default path of the license server installation is C:\program files\IBM\RationalRLKS\common for a 32 bit OS and C:\program files (X86)\IBM\RationalRLKS\common for a 64 bit OS
       
    4. Edit the Rational_server_perm.dat file and paste the copied contents of the license file below the existing package lines
       
    5. Save the Rational_server_perm.dat file
       
    6. Navigate to Start > All Programs > IBM Rational > License Tools
       
    7. Select Config Services tab
       
    8. In the path to the license file, point the location of the license file to Rational_server_perm.dat which was edited recently
       
    9. Click Save Services
       
    10. Navigate to Start/Stop/Reread the License File
       
    11. Click on Stop Server, Start Server and then Reread the License File
       
    12. Close the License Tools
       
    13. Open IBM Rational License key administrator from Start > All Programs > IBM Rational >
      Note: For Windows 7 and 2008 OS right click on IBM Rational License key administrator and select run as administrator
       
    14. Navigate to Settings > Client/server configuration
       
    15. Check Use License Server and then click Add Server
       
    16. In the server name replace New Server with the exact hostname of the license server machine
       
    17. Click OK

     

    Updated on 2013-08-28T08:44:17Z at 2013-08-28T08:44:17Z by Saurabh.Tyagi
  • Saurabh.Tyagi
    Saurabh.Tyagi
    1 Post

    Re: Configuring RLKS on windows server

    ‏2013-08-28T08:42:02Z  

    Hello Javed,

    Please find the list of steps mentioned below that is involved in manually configuring IBM Rational License Keys to the IBM Rational License Key Server:

    1. Edit the Permanent license key generated and downloaded from the license key center website
       
    2. Copy from the SERVER line until the end of the license file
       
    3. Navigate to Rational_server_perm.dat file located in the installation directory of the license server
      Default path of the license server installation is C:\program files\IBM\RationalRLKS\common for a 32 bit OS and C:\program files (X86)\IBM\RationalRLKS\common for a 64 bit OS
       
    4. Edit the Rational_server_perm.dat file and paste the copied contents of the license file below the existing package lines
       
    5. Save the Rational_server_perm.dat file
       
    6. Navigate to Start > All Programs > IBM Rational > License Tools
       
    7. Select Config Services tab
       
    8. In the path to the license file, point the location of the license file to Rational_server_perm.dat which was edited recently
       
    9. Click Save Services
       
    10. Navigate to Start/Stop/Reread the License File
       
    11. Click on Stop Server, Start Server and then Reread the License File
       
    12. Close the License Tools
       
    13. Open IBM Rational License key administrator from Start > All Programs > IBM Rational >
      Note: For Windows 7 and 2008 OS right click on IBM Rational License key administrator and select run as administrator
       
    14. Navigate to Settings > Client/server configuration
       
    15. Check Use License Server and then click Add Server
       
    16. In the server name replace New Server with the exact hostname of the license server machine
       
    17. Click OK

     

    Updated on 2013-08-28T08:44:17Z at 2013-08-28T08:44:17Z by Saurabh.Tyagi
  • JavedAbdul
    JavedAbdul
    2 Posts

    Re: Configuring RLKS on windows server

    ‏2013-08-28T08:53:34Z  

    Hello Javed,

    Please find the list of steps mentioned below that is involved in manually configuring IBM Rational License Keys to the IBM Rational License Key Server:

    1. Edit the Permanent license key generated and downloaded from the license key center website
       
    2. Copy from the SERVER line until the end of the license file
       
    3. Navigate to Rational_server_perm.dat file located in the installation directory of the license server
      Default path of the license server installation is C:\program files\IBM\RationalRLKS\common for a 32 bit OS and C:\program files (X86)\IBM\RationalRLKS\common for a 64 bit OS
       
    4. Edit the Rational_server_perm.dat file and paste the copied contents of the license file below the existing package lines
       
    5. Save the Rational_server_perm.dat file
       
    6. Navigate to Start > All Programs > IBM Rational > License Tools
       
    7. Select Config Services tab
       
    8. In the path to the license file, point the location of the license file to Rational_server_perm.dat which was edited recently
       
    9. Click Save Services
       
    10. Navigate to Start/Stop/Reread the License File
       
    11. Click on Stop Server, Start Server and then Reread the License File
       
    12. Close the License Tools
       
    13. Open IBM Rational License key administrator from Start > All Programs > IBM Rational >
      Note: For Windows 7 and 2008 OS right click on IBM Rational License key administrator and select run as administrator
       
    14. Navigate to Settings > Client/server configuration
       
    15. Check Use License Server and then click Add Server
       
    16. In the server name replace New Server with the exact hostname of the license server machine
       
    17. Click OK

     

    Thank you Saurabh

     

    This information helps !!

     

    Regards

    javed

  • @Sharma~Pankaj
    @Sharma~Pankaj
    12 Posts

    Re: Configuring RLKS on windows server

    ‏2014-02-12T08:49:48Z  

    <script>alert("foo")</script>