Topic
  • 5 replies
  • Latest Post - ‏2013-05-31T16:52:18Z by anibal.carvalho
hojin kim
hojin kim
2 Posts

Pinned topic Installation progress error in IBM Installation Toolkit for PowerLinux

‏2013-05-16T02:04:28Z |

env: 917 MMA vioserver

lpar : cpu 1/memory 1.5

 

hi, there. I met some error duirng installing powerlinux on IBM installation toolkit

during installation progress in IBM installation toolkit

 

also I found there are some log /var/log/IBM_LinuxToolkit.log as below

 

                                                                                  
                                                                                     
02:25:51 [manage_parts.py] - Running: hdparm -z /dev/sda                             
02:25:51 [manage_parts.py] - Status: 16                                              
02:25:51 [manage_parts.py] - Output:                                                 
 BLKRRPART failed: Device or resource busy                                           
                                                                                     
/dev/sda:                                                                            
 re-reading partition table                                                          
                                                                                     
                                                                                     
02:25:51 [manage_parts.py] - Deleting partition /dev/sda3                            
02:25:51 [manage_parts.py] - Running: parted --script /dev/sda rm 3                  
02:25:51 [manage_parts.py] - Status: 256                                             
02:25:51 [manage_parts.py] - Output:                                                 
Error: Partition /dev/sda3 is being used. You must unmount it before you modify it wi
th Parted.                                                                           
                                                                                     
                                                                                     
02:25:51 [manage_parts.py] - Error: cannot delete partition sda3                     
A fatal condition led to the interruption of the workflow execution                  
[root@localhost log]#                                                             

---------------------------------------------------------------------------

the error is below. in GUI env

01:17:12 - Starting /sgdeploy/sgtklinux/tk/wfscripts/copy_logs.sh...
01:17:12 - Storing log file /tmp/*.log ...
01:17:12 - Storing log file /var/log/wui/20120627.log ...
01:17:12 - Storing log file /var/log/wui/20130516.log ...
01:17:12 - Storing log file /var/IBMIT-version ...
01:17:12 - Starting /sgdeploy/sgtklinux/tk/wfscripts/ibmit_key.sh...
01:17:12 - Starting /sgdeploy/sgtklinux/tk/wfscripts/create_repository_configurator.sh...
01:17:12 - Starting /sgdeploy/sgtklinux/tk/wfscripts/manage_parts.sh...
01:17:12 [manage_parts.py] - Toolkit partition is /dev/sda2
01:17:12 [manage_parts.py] - Loading RAID operations to be performed
01:17:12 [manage_parts.py] - Deleting RAID arrays
01:17:12 [manage_parts.py] - Stopping all RAID arrays
01:17:12 [manage_parts.py] - Removing LVM logical volumes []
01:17:12 [manage_parts.py] - Removing LVM volume groups []
01:17:12 [manage_parts.py] - Stopping all LVM volume groups
01:17:12 [manage_parts.py] - Loading Conventional disk operations to be performed
01:17:12 [manage_parts.py] - Adjusting conventional disk operations to be used by parted command
01:17:12 [manage_parts.py] - Deleting Partitions
01:17:12 [manage_parts.py] - Deleting partition /dev/sda2
01:17:12 [manage_parts.py] - Deleting partition /dev/sda1
01:17:12 [manage_parts.py] - Creating Partitions
01:17:12 [manage_parts.py] - Creating partition /dev/sda1
01:17:12 [manage_parts.py] - Re-reading partition table for /dev/sda (try 1)
01:17:13 [manage_parts.py] - Stopping all RAID arrays
01:17:13 [manage_parts.py] - Creating partition /dev/sda2
01:17:13 [manage_parts.py] - Creating partition /dev/sda3
01:17:14 [manage_parts.py] - Creating partition /dev/sda4
01:17:14 [manage_parts.py] - Formatting Toolkit partition
01:17:14 [manage_parts.py] - Activating all existing LVM volume groups
01:17:15 [manage_parts.py] - Activating all existing RAID arrays
01:17:15 [manage_parts.py] - Creating RAID arrays
01:17:15 [manage_parts.py] - Waiting for RAID arrays to become clean
01:17:15 [manage_parts.py] - Arrays: []
01:17:16 [manage_parts.py] - Stopping all RAID arrays
01:17:16 [manage_parts.py] - Stopping all LVM volume groups
1:17:16 [manage_parts.py] - Process done
01:17:16 - [/sgdeploy/sgtklinux/tk/wfscripts/activate_swap.sh] swap partition /dev/sda3 was activated
01:17:16 - Starting /sgdeploy/sgtklinux/tk/wfscripts/predistroinstall.sh
01:17:16 - Starting transfering install image
01:17:16 - predistroinstall --distropath cdrom:/tmp/tmpbztMua --autoinsfile /tmp/kickstart.txt --distroname RHEL --distroversion 6 nonet nostorage driverload=ibmvscsic driverload=ibmveth

init: serial (hvc0) main process (1710) killed by INT signal

init: serial (hvc0) main process ended, respawning

01:18:21 - Starting /sgdeploy/sgtklinux/tk/wfscripts/copy_logs.sh...
01:18:21 - Storing log file /tmp/*.log ...
01:18:21 - Storing log file /var/log/wui/20120627.log ...
01:18:21 - Storing log file /var/log/wui/20130516.log ...
01:18:21 - Storing log file /var/IBMIT-version ...
01:18:22 - Starting /sgdeploy/sgtklinux/tk/wfscripts/ibmit_key.sh...
01:18:22 - Starting /sgdeploy/sgtklinux/tk/wfscripts/create_repository_configurator.sh...
01:18:22 - Starting /sgdeploy/sgtklinux/tk/wfscripts/manage_parts.sh...
01:18:22 [manage_parts.py] - Toolkit partition is /dev/sda2
01:18:22 [manage_parts.py] - Loading RAID operations to be performed
01:18:22 [manage_parts.py] - Deleting RAID arrays
01:18:22 [manage_parts.py] - Stopping all RAID arrays
01:18:22 [manage_parts.py] - Removing LVM logical volumes []
01:18:22 [manage_parts.py] - Removing LVM volume groups []
01:18:22 [manage_parts.py] - Stopping all LVM volume groups
01:18:22 [manage_parts.py] - Loading Conventional disk operations to be performed
01:18:22 [manage_parts.py] - Adjusting conventional disk operations to be used by parted command
01:18:22 [manage_parts.py] - Deleting Partitions
01:18:22 [manage_parts.py] - Deleting partition /dev/sda2
01:18:22 [manage_parts.py] - Error: cannot delete partition sda2
I used  the virtual device on vios

Updated on 2013-05-16T06:57:27Z at 2013-05-16T06:57:27Z by hojin kim
  • anibal.carvalho
    anibal.carvalho
    19 Posts

    Re: Installation progress error in IBM Installation Toolkit for PowerLinux

    ‏2013-05-17T13:44:44Z  

    Hi.

    It seems one of the partitions of the disk referred by the sda device was mounted. Please reboot your system using IBMIT (this will unmount every partition) and then try again.

    Thanks,

    Anibal.

  • anibal.carvalho
    anibal.carvalho
    19 Posts

    Re: Installation progress error in IBM Installation Toolkit for PowerLinux

    ‏2013-05-17T18:19:20Z  

    Hi.

    It seems one of the partitions of the disk referred by the sda device was mounted. Please reboot your system using IBMIT (this will unmount every partition) and then try again.

    Thanks,

    Anibal.

    What partitioning scenario did you choose? Automatic or manual? With LVM, RAID or conventional?

  • anibal.carvalho
    anibal.carvalho
    19 Posts

    Re: Installation progress error in IBM Installation Toolkit for PowerLinux

    ‏2013-05-17T18:20:23Z  

    What partitioning scenario did you choose? Automatic or manual? With LVM, RAID or conventional?

    Did you manually mount the sda3 partition?

  • hojin kim
    hojin kim
    2 Posts

    Re: Installation progress error in IBM Installation Toolkit for PowerLinux

    ‏2013-05-31T01:46:15Z  

    What partitioning scenario did you choose? Automatic or manual? With LVM, RAID or conventional?

    There is same error regardless of lvm,conventional..

    and I didn;t mount sda3 partition.

    Thanks.

  • anibal.carvalho
    anibal.carvalho
    19 Posts

    Re: Installation progress error in IBM Installation Toolkit for PowerLinux

    ‏2013-05-31T16:52:18Z  
    • hojin kim
    • ‏2013-05-31T01:46:15Z

    There is same error regardless of lvm,conventional..

    and I didn;t mount sda3 partition.

    Thanks.

    The IBMIT LiveDVD does not automatically mount any partition so it seems your system may have a corrupt partitioning. If you are sure you can delete all partitions of this system, then you can follow the steps below to remove any broken/corrupt SW RAID array or any broken/corrupt volume groups (LVM):

    Reboot your system, go to the Rescue mode (option 2) and run:

    RAID

    # Get the list of partitions that are part of the array, usually /dev/md0
    $ mdadm --detail /dev/md<n>

    # Stop the array
    $ mdadm --stop /dev/md<n>

    # Zero each partition superblock (for each partition listed on the first step, for example /dev/sda5)
    $ mdadm --zero-superblock /dev/sd<c><n>
    $ mdadm --zero-superblock /dev/sd<c><n>

    ...

    LVM

    # List each volume group

    $ vgs

    # Delete each one

    $ vgremove volGroup
     

    # List each logical volume

    $ lvs

    # Delete each one

    $ lvremove logVol

    # List each physical volume

    $ pvs

    # Delete each one

    $ pvremove phyVol

    Go back to the IBMIT menu:

    $ welcomecenter

    Run your installation.