Topic
  • No replies
BorisFe
BorisFe
1 Post

Pinned topic Power off blades in the Blade center via the application

‏2013-06-29T08:00:06Z |

HI
 
We need to power off one blade in the Blade center via the application.
 
We use SNMP protocol.
 
To shutdown the OS and power off the blade via SNMP we use:
1. OID - 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.7.N, Where N - Blade number
 
2. Value - 2, Soft off , Shut Down OS and Power off Blade.
 
The Problem is that the Blade is not switch to OFF. It starts shutdown and then restart. The blade is doing restart instead of shut down to OFF.
 
What is the problem?