Topic
1 reply Latest Post - ‏2013-07-17T19:44:17Z by Bhadri
Bhadri
Bhadri
5 Posts
ACCEPTED ANSWER

Pinned topic db2haciu - Error getting info for NIC.

‏2013-07-10T18:36:01Z |

Hi,

I am trying to set up db2haciu on DB2 Standby System. When db2haciu tries to detect the network interface card the db2haciu fails with the following error

Configuring quorum device for domain 'a11db2' ...
Configuring quorum device for domain 'a11db2' was successful.
Query failed. Refer to db2diag.log for the current member and the DB2 Information Center for details.

In db2diag.log I see the following messages. Is there a reason why db2haciu would fail to detect NIC on the system? Any troubleshooting tips would be much appreciated. Thank you.

2013-07-10-17.50.28.885436+000 E307712E543           LEVEL: Error
PID     : 24903                TID : 139854710363936 PROC : db2haicu
INSTANCE: db2a11               NODE : 000
HOSTNAME: xxxx-xxxx
FUNCTION: <0>, <0>, <0>, probe:1333
RETCODE : ECF=0x90000554=-1879046828=ECF_SQLHA_QUERY_FAILED
          Query object attributes failed
DATA #1 : String, 67 bytes
libsqlha: sqlhaGetObjectAttribute() call error from wrapper library
DATA #2 : String, 45 bytes
Line # : 2726---2610-407 No resources found.
DATA #3 : signed integer, 4 bytes
262152

2013-07-10-17.50.28.886255+000 E308256E380           LEVEL: Error
PID     : 24903                TID : 139854710363936 PROC : db2haicu
INSTANCE: db2a11               NODE : 000
HOSTNAME:xxxx-xxxx
FUNCTION: DB2 UDB, high avail services, sqlhaGetInfoForClusterObject, probe:5030
RETCODE : ECF=0x90000554=-1879046828=ECF_SQLHA_QUERY_FAILED
          Query object attributes failed

2013-07-10-17.50.28.911776+000 E308637E413           LEVEL: Error
PID     : 24903                TID : 139854710363936 PROC : db2haicu
INSTANCE: db2a11               NODE : 000
HOSTNAME:xxxx-xxxx
FUNCTION: DB2 UDB, high avail services, sqlhaUIListAllNICsInClus, probe:200
RETCODE : ECF=0x90000554=-1879046828=ECF_SQLHA_QUERY_FAILED
          Query object attributes failed
MESSAGE : Error getting info for NIC.

2013-07-10-17.50.28.912007+000 E309051E375           LEVEL: Error
PID     : 24903                TID : 139854710363936 PROC : db2haicu
INSTANCE: db2a11               NODE : 000
HOSTNAME:xxxx-xxxx
FUNCTION: DB2 UDB, high avail services, sqlhaUIListAllNICsInClus, probe:200
RETCODE : ECF=0x90000554=-1879046828=ECF_SQLHA_QUERY_FAILED
          Query object attributes failed

2013-07-10-17.50.28.912140+000 E309427E372           LEVEL: Error
PID     : 24903                TID : 139854710363936 PROC : db2haicu
INSTANCE: db2a11               NODE : 000
HOSTNAME:xxxx-xxxx
FUNCTION: DB2 UDB, high avail services, sqlhaUINewDomainSetup, probe:850
RETCODE : ECF=0x90000554=-1879046828=ECF_SQLHA_QUERY_FAILED
          Query object attributes failed

2013-07-10-17.50.28.912376+000 E309800E363           LEVEL: Error
PID     : 24903                TID : 139854710363936 PROC : db2haicu
INSTANCE: db2a11               NODE : 000
HOSTNAME:xxxx-xxxx
FUNCTION: DB2 UDB, high avail services, sqlhaUIMain, probe:1500
MESSAGE : ECF=0x90000554=-1879046828=ECF_SQLHA_QUERY_FAILED
          Query object attributes failed

 

DB LEVEL: "DB2 v10.1.0.2", "s121127", "IP23394", and Fix Pack "2".

Updated on 2013-07-10T18:39:04Z at 2013-07-10T18:39:04Z by Bhadri
  • Bhadri
    Bhadri
    5 Posts
    ACCEPTED ANSWER

    Re: db2haciu - Error getting info for NIC.

    ‏2013-07-17T19:44:17Z  in response to Bhadri

    In case someone else runs into the same issue:

    Looks like a NIC with only IPv6 will trigger the above failure. Either need to remove it or add a IPv4 to it.

    Thank you