Topic
  • 1 reply
  • Latest Post - ‏2013-06-14T14:28:43Z by amccarl
amccarl
amccarl
73 Posts

Pinned topic AIX Virtual Memory Manager recommended settings

‏2013-06-11T20:17:15Z |

While it is difficult to prescribe a standard recommendation for all virtual memory manager tunables on AIX systems running the DB2 product, there are some important specific settings where this is possible. Technical document 1328602 focuses primarily on parameters which have non-default settings and are considered "Best Practice". These settings apply to all versions of DB2 product running on AIX 5.3, 6.1, and 7.1, and also apply to systems using both cached and non-cached (Direct I/O) file system I/O. 

This is complete covered by technical article 1328602http://www.ibm.com/support/docview.wss?uid=swg21328602

 
 
Updated on 2013-06-14T14:39:40Z at 2013-06-14T14:39:40Z by amccarl
  • amccarl
    amccarl
    73 Posts

    Re: AIX Virtual Memory Manager recommended settings

    ‏2013-06-14T14:28:43Z  
    Hello!  We've had a number of clients respond through feedback to our technical documents indicating that they have further questions or comments that require additional dialogue.  Unfortunately, our feedback is anonymous, so unless an email address or other contact information is included, we have no way to get back in touch with you.
     
    Within DB2 support, the management team asked if we could somehow link our documents to the forums so that we could invite more discussion - like this!   As a start, we chose a small set of  technical articles and "seeded" the forum with initial entries so that we could have a starting place for conversation.  The documents have now been updated with links to the forums as well.  
     
    Hopefully, we will make DB2 support better by providing more interaction around our technical information!