A reader asks, "How does an ESB address business process?"
He was reading one of the articles I've written
, "Why do developers need an Enterprise Service Bus?
" (Which, BTW, he describes as "exactly the article I was looking for." And no, I didn't have to pay him anything. Although come to think of it, he is buttering me up so that he can ask me a question.)Bob Sutor
addressed this topic briefly in his wishful predictions for 2005
- The volume of public technical arguments will increase around whether Business Process Execution Language (BPEL) support belongs within an ESB implementation or is accessible via a service on the bus. (.8) Eventually people will decide it doesn't make much difference. (.9)
Some people feel that one of the capabilities of an ESB should be to execute business processes. Others feel that business process is outside of an ESB's duties, but that a business process can and should use an ESB to invoke its activities implemented as services.
So does workflow run inside an ESB or does it use an ESB? I fall into the latter camp, that a workflow uses an ESB, but runs in something separate, a workflow engine.
An area of confusion is that workflow is similar to mediation flow (aka message flow, managed by a process manager
). The latter is an ESB's ability to intercept a message in transit and mess with it by transforming its contents
and/or routing it to a new destination
Message flows are a lot like non-interruptible workflows (aka microflows) in that they have no human interaction activities and tend to run in a single transaction with no persistence. A difference is that a message flow is focused on manipulating a message, whose transmission kicks off the flow; whereas a workflow (interruptible or not) is more of a service that can be invoked whenever needed via messaging or otherwise. Message flows (and non-interruptible workflows) tend to be stateless; they don't wait for events or timings. For this reason, mediations are much better for, for example, implementing splitters
because the latter requires state to store the messages before merging them.
So the generally accepted answer is that ESBs implement mediation flows but not business processes. The latter run outside of an ESB in a process engine, but implement their activies as service consumers that use ESBs to invoke the service providers.
To learn some interesting stuff about intellectual property, check out Lawrence Lessig.
has a new tool, the IBM Service Component Architecture Explorer Tool
I've talked about service component architecture
(SCA) for developing SOA
applications. The spec is part of WebSphere Process Server
and part of Apache Tuscany
|SCA Explorer is a registry of components in a WPS or WESB install. According to the web site:|
SCA Explorer presents information about the SCA services available in a given WebSphere Enterprise Service Bus (ESB) server or a WebSphere Process Server (WPS). This information includes details such as how to locate and invoke such services (for example, when developing a new application that intends to re-use existing services in the enterprise).
So, why not take it for a spin?
The developerWorks Architecture Zone
has a new article, "developerWorks bloggers on Architecture
The subtitle is "Code is not your friend, and other words of wisdom from developerWorks bloggers." The article compiles blog postings from several of IBM's leading bloggers concerning architectural issues.
For example, Marc Colan
discusses ESB compared with point to point
. Marc is great at making new technology understandable in simple terms. Here he does a nice job of enumerating the issues that lead you to needing an ESB. Reminds me of my ESB for Developers Article
(which includes pictures).
The article also includes one of my favorite blog postings by Don Ferguson
, SOA product complexity
. It does a nice job of explaining succinctly different kinds of services and how the different products apply.
And (of course) there's one of my postings, Interoperability or integration?
, where I try to define the difference between the two. (Originally Interoperability vs. Integration
and More on Interoperability vs. Integration
.) 'Course, guess this discussion isn't new to you if you've been keeping up with this blog.
So, good stuff. Go check it out.[Read More
I've given my blog a new name. Same old blog, but new and improved name.
|What was the "J2EE in Practice" blog is now the "Bobby Woolf: WebSphere SOA and J2EE in Practice" blog. My developerWorks advisors suggest this will make it much easier to find in searches. 'Course, when you Google my name, this blog is the first item in the list, so I don't know how much better I'm going to do than that. Nevertheless, the new name is more buzzword compliant, so whether you're looking for info on WebSphere, SOA, or J2EE (or Practice?), hopefully you'll find my blog.|
Originally, I'd planned for my blog to be about J2EE stuff in general and not IBM products specifically. But as I found looking back a year later, I'd gotten a little bit board with J2EE in general (how much can you say about designing the persistence mechanism yet again?!) and the value-add I could bring was helping to disseminate info about our products that we (or at least I) wish our clients understood better.
So hopefully the new name isn't just slick marketing, but a more accurate description of the blog's evolving mission.[Read More
Apache Tuscany is an open-source runtime for SOA
applications using SCA
The Apache Tuscany
project is an open source project which "provides runtime capabilities for applications built using a Service Oriented Architecture (SOA)." It "provides capabilities which follow the Service Component Architecture specification and the Service Data Objects specification, which together define a simpler, business-oriented approach to the creation of applications and solutions which use a SOA." It currently provides support for running service components developed in either Java or C++. The project proposal
states this rational: "Tuscany provides multiple language implementations of the Service Component Architecture (SCA) specifications and related technologies such as SDO."
According to "Apache Tuscany Project to Simplify SOA Development
" in eWeek
, "Most of the committers to the Tuscany project are from IBM and BEA Systems Inc." The champion and an initial committer is Geir Magnusson Jr. of the Apache Harmony
project and the Gluecode
product that became WAS CE
SDO is currently implemented in WAS and WebLogic. In WAS, it's one way for our Java ServerFaces (JSF) screens to access data, and the way messages appear in the mediation framework in the Service Integration Bus
. SCA is currently implemented in WPS
, along with the Business Objects component that is an extension of SDO. There are currently efforts to make SCA and SDO open standards supported by a variety of vendors
. Tuscany is an important step towards making that happen.[Read More
A significant section of developerWorks
which is easy to overlook is the Technical events and webcasts
For example, just the sheer number of Webcasts
we have is amazing. Here are a few that caught my eye:
There are also several Technical briefings listed. These are half- or full-day mini-conferences presented in selected cities. Some interesting ones are:
So, there seems to be something for everyone. Check it out.
Want to learn more about WebSphere Application Server performance issues and what to do about them?
Check out the WebSphere Application Server Performance Information
page (one of the More Places to Learn about WebSphere
). It has links to the Tuning performance
section in the various InfoCenters.
For details on the 64-bit platforms supported, see WebSphere Application Server System Requirements
and WebSphere Application Server V6.0.2 detailed system requirements
has asked, "Are Men Necessary?
" And one of my readers seems to be asking: Are transactions necessary?
In The Message Consumer Rollback Pattern
, I implied that a message should usually be consumed from a queue in a transaction. In this case, one advantage is that if the processing of a valid message
fails, it can be rolled back onto the queue (instead of onto a standby queue
). In the comments
, Euxx (Eugene Kuleshov?) argues against this in his own blog posting, Sometimes transactions are not your friends
. His main motivation against using transactions seems to be everyone's favorite whipping boy, performance.
The point of using transactions to consume messages is to ensure that messages are not lost, that all of the processing of a message completes successfully before permanently removing the message from the channel. So the questions are: What's the risk of losing messages? And what're the consequences?
Transactions definitely add overhead, as does persistence, security, and a host of other quality of service capabilities which help ensure a system functions correctly even in the presence of adverse conditions (such as crashing when a task is half-completed). You don't need security (or locks on your doors) if you know that no one will ever try to do something they're not supposed to, and you don't need transactions if you know that all your tasks once begun will always complete successfully. Transactions, like these other QoS capabilities, are insurance against failure; every success pays a small tax which more than pays for itself if and when failure occurs.
Like with any insurance, you have to ask yourself: Is it worth the cost? Namely: How likely or often will failure occur, how negative can its impact be, and is the overhead on the cases that turn out to be successful worth it? If you knew which cases were likely to fail, those are the only ones that need the overhead. (That's why not all Internet traffic is SSL encrypted, only traffic containing private data.) So it's never as simple as saying transactions (or persistence, security, etc.) add too much overhead, systems run faster without them, so don't use them. Of course removing overhead improves performance, and you'll look like a genius, right up until a problem occurs which would've made the overhead worth it.
I've talked about Social Network Analysis
, finding connections between things, sometimes seemingly unrelated. Well here's a trail a colleague as found for getting to my blog.
|The trail begins with the Professor Bainbridge Blog, where Professor Stephen Bainbridge, a corporate law professor at UCLA, discusses "an eclectic mix of law, business and economics, Catholicism, politics and current events, dogs, and photography," including Professor Bainbridge on Wine.|
Practically the same as my developerWorks/J2EE/WebSphere blog, right? Well, in Corporate Blogs, Bainbridge links to a list of Fortune 500 blogs. That page on the Fortune 500 Business Blogging Wiki links to their wiki page for IBM.
The IBM wiki page links to The Hitchhiking Blogger's Guide To IBM Blogs, maintained by Richard Schwartz. The guide page links to a more specific IBM DeveloperWorks Blogs list.
That page listing dW blogs links to our root developerWorks blog page, which lists my blog, and also links to my blog directly (using the old pre-Roller URL).
So there we go: From a UCLA law professor to a list of Fortune 500 blogs to IBM's blogs to developerWorks' blogs to mine. Go figure. What would the social networking guys say?![Read More
V for Vendetta
) is a fantastic film.
|Whereas so much Hollywood movie-making rehashes the same old ideas, this film is original and innovative. While others are simplistic and superficial, this is intelligent and thought-provoking. Like the Matrix movies, this one is also visually stunning. It's an instant classic I think will provoke much discussion over the coming weeks and still do so for years.|
You may feel like completely agreeing with the film or disagreeing completely. You and a friend may both feel strongly that it means very different things and have opposite takes on the moviemakers' biases. In any event, you're likely to feel something about the film, which is more than I can say for most movies today. So if you'd like to see a really interesting movie, probably one of the most interesting this year and perhaps this decade, see this one.
I suggest you not read about the film--discussions of it just spoil the surprises. But after you see the film, you can check out:
(BTW, I usually don't do movie reviews. But for some others I've done, see:
I've worked with a couple of clients
who use standby queues. This is supposed to solve problems, but I think it really creates more.
The problem is the same as described in The Message Consumer Rollback Pattern
: A consumer successfully receives a valid message but cannot process it because a resource it needs is down.
We know the message is valid because it passes the message validator
Options: Throw away the message, retry, put it on an invalid message queue. All bad.
If only there were someplace to queue up these messages that cannot be processed, so that they can be processed later.Therefore, use a standby queue. When a message cannot be processed, move it to the standby queue.
This seems great. The message is out of the way but not lost. Processing can continue on other messages on the queue.
But wait: If some of the messages fail, won't they all fail? The queue should be a datatype channel
, so the messages should all be doing the same sort of thing, thus all requiring the unavailable resource; so why keep reading from it? Let's say it's not a datatype channel, that some of the messages need database A and others need database B. Then you need two standby queues, one for messages that need database A and one for B messages; so that when one database is available again, you'll know which messages to retry. With two standby queues, A and B, you've now created datatype channels, so you should have just done that in the first place.
Anyway, once you get the messages on the standby queue, how do you get them off again? You don't want to do it until the resource is available again, but how do you know when that is? When it is, what do you do with the messages? Move them from the standby queue back to the input queue? How?
Standby queues also make transactions very difficult. When you move a message from one queue to another, you need to do so in a single transaction so that the message cannot be lost. But if the transaction tries to use the resource and fails (which is the whole premise of this (anti)pattern), then the transaction is shot, so it can't be used to commit the message onto the standby channel. So separate transactions need to be used to read the message off the input queue and update the resource, which is a lousy transaction model that can easily duplicate or loose data.
So standby queues are bad. I wouldn't use them.
What should you do instead? Use The Message Consumer Rollback Pattern
. If the message is valid, but you can't process it right now, don't bother putting it on a dead letter queue or an invalid message queue or a standby queue, just roll back the transaction and the message will roll back onto the input queue. It's the best way to put things back the way they were and wait until the resource is available again.[Read More
So how do you tell if something is wrong with a message? Here's a pattern.
A messaging consumer
receives a message.How can a consumer make sure it has received a valid message?
A consumer can only process a message if the message is valid, meaning that the message's format and contents fit the consumer's expectations. Otherwise, the consumer won't be able to process the message and make sense out of it. If the message contents are supposed to conform to a particular XML schema, the contents had better be valid for the schema. If the message is supposed to contain a message/request ID to use as a reply's correlation identifier
, the message had better contain that ID.
Part of the value of detecting invalid messages is so that they can be put on an invalid message channel
, kind of an error log for invalid messages. This gets the bad messages off the main queues and on to a side queue where error handling code can try to do something with them.
Some consumers can assume that all messages are valid, that only valid messages are put on the queue. But that's often not a safe assumption.
For data validation, the consumer could try to commit the data to the database and see if that fails; but if the commit does fail, then the transaction is ruined. The consumer should be a transactional consumer
so that messages are not lost, but if the transaction fails, then it can only be rolled back, after which the message will just be consumed again and fail again. To put the message on the invalid message channel, the transaction must be able to commit successfully.
So invalid messages need to be detected, and must do so without invalidating the transaction.
Therefore:Use a message validator, which parses the message format and checks the data, making sure that the message is valid.
A message validator can be a separate object--you pass in the message, it answers whether or not the message is valid. Or the validator can be the message processing code which errors out if a problem is encountered--for example, parsing XML data using a validating parser. In any event, the validation must be contained in the consumer's transactional context, so that once the consumer detects an invalid message, it can move the message to an invalid message channel and commit successfully.
If the message is valid, but processing it fails, then the cause must be a problem with the resources being used to process the message. As long as the message is valid, save the message to retry it again when the resource is fixed by using message consumer rollback
to put the message back on the queue.[Read More
What happens when messaging systems go bad? Specifically, when a consumer can receive and read a message, but cannot do what it says to do? Here's the answer in a pattern-ish sort of form.
Here's the pattern:
A messaging consumer
) receives a message and successfully parses it. But when the consumer tries to process the contents--such as performing an action
, storing some data
, or reacting to an event
--the processing fails; probably because the app doing the processing uses a database and the database is down, inaccessible, overloaded, etc. So the app gets an error that the processing cannot be done.When a consumer cannot process a valid message, what should it do with the message?
The app could throw the message away, but that'd be bad. It could try to process the message again, but that'll probably fail again. (The definition of insanity
is ...) It could put the message on an invalid message channel
, but that's misleading because there's nothing wrong with the message; the problem is with the consumer's app that can't successfully processes the message.
This is what transactions are for. Hopefully the consumer is a transactional consumer
Therefore:The consumer should be transactional and should rollback the transaction, therefore putting the message back on the queue.
This way, the message remains on the queue as if it were never consumed in the first place. It waits on the queue until it's consumed again, and hopefully when that retry happens, the app will succeed in processing the message this time. If the consumer is a message-driven bean
(MDB), transactions are part of the EJB component model, so the rollback basically happens for free (because the EJB container does it for you).
Moral of this pattern: Use transactions, they're your friends. For more info, see "Configuring and using XA distributed transactions in WebSphere Studio
," one of the articles I've written
(also listed in my author's spotlight
I've been talking about WebSphere Business Process Management
(WBPM) and showing some pictures that help explain what's going on. I now have some better pictures publicly available, so let's review those.
In WebSphere Process Server: A Russian Doll
, I showed how WPS contains WESB, which contains WAS. Here's a better picture of that:
WebSphere Application Server, ESB, and Process Server
In WebSphere Process Server Components
, I showed the component architecture in WPS. That picture changed a little when we released WESB, which WPS is now built on. Here's the updated picture:
WebSphere integration product family
Actually, I disagree with this picture a little bit. I think we should show the Mediation Flows box as its own row above SOA Core and below Supporting Services. Then you could draw a line between Mediation Flows and Supporting Services and say that everything below the line is in WESB, whereas the stuff above the line what WPS adds. In other words, WESB has Mediation Flows, but doesn't have anything else in the Supporting Services row; I wish the picture showed that better.
Way back in December, in Service Component Architecture
, I showed what an SCA looks like and how it can be implemented. Here's an update:
Service Component Architecture overview
I like the way this picture shows both the Interface and the Reference(s). Other versions of this diagram I've seen show Selector and Interface Maps separated from the rest of the Implementation list; this is because those latter two don't really implement anything, they're adapters for connecting to an existing implementation. Too bad this version doesn't show that detail.
So, I hope these updated diagrams help you understand what I've been talking about a little better. Enjoy.
As Bill has already noted
, many (all?) of the developerWorks blogs
are now on Roller
So the blog looks and works the same, but with a few differences. All the old URLs still work, but now map to new, simpler, better URLs. This blog's URL is now http://www.ibm.com/developerworks/blogs/page/woolf
. Each posting's URL now has the posting's title in it, instead of a database UID, such as http://www.ibm.com/developerworks/blogs/page/woolf?entry=we_re_now_on_roller
. (I'll have to try naming two postings the same to see what happens. What if you rename a posting?) In the column on the right is a new section, Recent Entries, which gives a nice compact list of my latest postings; less scrolling to look them over. There's also a new search box at the top of the blog page, just below my bio, which does a nice job of finding postings just on my blog. (Will I no longer need to Google ""something interesting" woolf site:ibm.com"
So, bare with us as we learn to blog all over again. In many ways, Roller is better, offers us more editing features that you'll never see but we'll appreciate, and is certainly much more standard than what dW was using before. But like all things worth knowing, there is a learning curve. Should be interesting.
A phrase IBM is throwing around a fair bit is "information as a service." What does that mean?
Information as a service (IaaS?) is part of our service-oriented architecture (SOA) approach. In our SOA Reference Architecture
diagram, this is the Information Services block.
The idea is that in an SOA,
compound composite applications
need access to data just like any other apps. To the extent that just means using JDBC to access a database, that's the same old stuff. But there's also the opportunity to develop a set of services for accessing a set of data, which separates you from where that data is stored, how it's formatted, and so on.
A good example is the way many companies store the info for a single customer in several different databases, because different apps want their own customer attributes and because they all want local access to the customer from the local database they manage. Such spread out, duplicated data makes it a real challenge to create, delete, or update a customer. So one approach is to define a customer management service, with operations like create, delete, and update. Expose that service on an ESB, and you can invoke it from anywhere, it'll run anywhere it's hosted, and it'll do whatever steps are necessary (whether that's two steps or 200) to update the databases. If tomorrow you add another database, modify the service to update that database as well and the service consumers never need to know the difference.
Some sources for more info:
A reader pointed me to his blog, which has a really interesting premise.
The blog is Leadership by Numbers
, authored by Jack Dausman. Thanks to Jack for pointing me/us all to it in his comment on Social Network Analysis
. I don't know Jack and have only looked at his blog a little bit, but I love the premise:
As kids, we made art with paint-by-number kits. Simply matching the outline numbers with an oil paint gave us the illusion of mastery. Today, I'm in IT management in Washington, DC: consulting, systems administration, development & training. And, I still see a lot of paint-by-number projects which try to be the real thing. IT leadership is about reading the numbers, then going outside the lines and taking risks.
Now that is an excellent analogy for how I feel about heavyweight software methodologies! All too often, people are following all the steps but totally missing the point of producing good software. One colleague recently told me, "Sub-average programmers aren't successful with agile methodologies." I responded, "As compared to what? Sub-average programmers certainly aren't successful with heavyweight methodologies! They're not successful with anything; that's what makes them sub-average." Paint-by-numbers doesn't make you an artist, and methodologies by themselves don't make you good at developing software.
For more thoughts along these lines, check out how complicated use cases have gotten
WebSphere Application Server Support
has issued a security flash: Security: Possible security exposure with JSP source code on IBM WebSphere Application Server Version 5 (PK13792 and PK20181)
I don't know any more about this problem than what the flash says, but to summarize:
- Under some circumstances, the JavaServer Pages (JSP) source code is returned instead of the formatted output.
- Affected versions: WAS 5.0.2.x and 5.1.1.x
- Does not affect WAS 6.x
- Right now, the fix is to apply an Interim Fix: PK13792 (WAS 5.0.2.x) or PK13792 or PK20181 (WAS 5.1.1.x)
- These fixes will be rolled into the next cumulative release. These cumulative fixes versions are planned but not yet avaialble; they'll be listed on Recommended fixes for WebSphere Application Server when they're available.
To get notified of announcements like this in the future, subscribe to IBM's RSS feed for WAS
To learn more about WAS support, see Keeping WAS Up-To-Date
and Working with IBM Support