pureScale on Linux
We are currently building nanoclusters in several locations worldwide, including here in Dublin. Somehow the lab guys have come up with a way to get pureScale to work on about $500 worth of hardware! Respect!
The nanocluster is a pureScale cluster built on 3 intel Atom boxes with 1 acting as storage and running the demo software, the other two having one CF and one member on each. Gigabit ethernet is used between the nodes.
The nanoclusters (obviously) do not consist of a supported configuration and are not for production use.
Nanoclusters are a great way to get pureScale out there for demos and for clients, ISVs and partners to try it out for themselves. The cluster comes pre-packaged with demos and instructional software.
If you want to get your hands on one of these little beauties. Please contact your friendly local sales, avalanche teams or me for more information or a demo.
Unfortunately we can't give the nanoclusters out on loan for extended periods but we will also be releasing instructions and code to allow you to build your own.
Watch this space...
As Winston Churchill said (and famously paraphrased by a certain Roy Keane years later) "He who fails to plan plans to fail". This applies to any task that is more than trivial. Whether it is creating a new lawn or installing pureScale...
If you are going to be installing pureScale then the installation itself is really easy. Where the preparation comes in is in getting the environment set up beforehand. I strongly recommend that you take a careful look here at the DB2 infocenter "Planning for a IBM DB2 pureScale Feature for Enterprise Server Edition deployment" . This should be your first step towards installing pureScale and done before any of the logistics can fall into place. There are various considerations and checklists here such as:
If you need any help or advice then please drop me a line.
We are currently setting up the tpc-c benchmark on the cluster. Tpc-c is the standard benchmark for OnLine Transaction Processing ( http://www.tpc.org/tpcc/ ). We will be doing some test runs on the pureScale cluster and some tuning to see what kind of throughput we can get out of the cluster for typical OLTP workloads . We will start out with 4 nodes first with the default parameters, then start tuning and tweaking. Please let me know if you want to know more?
Purescale delivers a high availability, scalable database clustering solution on commodity hardware. PureScale is mainly aimed at OLTP workloads and I believe it delivers on the promise that Oracle RAC has been making for several years and not quite delivering on. It delivers these benefits without the need for applications to be made cluster aware.
I think a lot of companies are looking to their IT to be scalable and flexible these days. Imagine you could buy a small number of commodity servers to run your application(s) on. Then simply add more when you need more resources. Swap servers in easily to help out with the processing load of end of financial year number crunching or the holiday rush on your online store. Pay the licenses fees and running costs when you use extra servers and then easily shut them down and not pay when they are not needed.
I guess this kind of flexibility is (arguably) available as follows:
1) Mainframe with virtualization. This is a great solution for those who have the skill set and budget for it. In my experience many companies are not ready for this. It's also difficult to shut down part of a mainframe!
2) Cloud computing. A great solution if you can "cloud enable" your applications and you trust the cloud service provider (a lot). Again many are not ready for this.
PureScale (especially on Linux / system x as it is available now) can give this kind of flexibility in a much more accessible package.
As part of my job here in Dublin with IBM I'm currently building a 6 node pureScale cluster on systems x with SLES 10. Watch this space for more on this...
...oh yes and please comment if you want to see more.
I guess you might ask "why is this relevant?". Well 10 microseconds is approximately the time taken for a purescale member to communicate with the central cache to look for a piece of data. Let's call this a "pureScale communication" for the sake of simplicity. More on the technicalities of purescale communication, Remote Direct Memory Access (which facilitates this communication) etc in the next blog entry but for now...
...have you every stopped to think what length of time 10 microseconds represents?
A microsecond is 10 to the minus 6 seconds or one second divided by a million. I think this is so small a number that it is hard for us to understand. I looked for some examples to illustrate just how fast this is and there are some here on wikipedia but nothing that is intuitively understandable (at least not to me).
I though I could find something to explain this and here's a couple of things that are quite quick:
I give up, all I can say is 10 microseconds - that's fast, very fast!
The question of preventing split brain scenario comes up again and again with regard to pureScale (PS).
The scenario is as follows:
In a standard PS setup we have a primary and a standby CF. If the connection between these two machines fails but both keep going then the secondary node would "think" that the primary has failed and perform a failover. Now both CFs would take control of the shared data (the database) and the database would end up in a big mess. This would happen if the networking between the two machines broke down or if one got really busy and couldn't respond to the other fast enough.
Of course if this was true the we would be in big trouble but fortunately it is not. A technology called I/O fencing is used to ensure the above scenario can't happen.
I/O fencing is implemented via SCSI-3 Persistent Reserve technology. The core of the technology involves “registration” and “reservation” rights to disk partitions. Registration allows access to data. Many nodes (members and Cfs) can have “registration” access but only one can hold ”reservation” on a partition. Registered nodes can eject others. Ejection is a final and atomic action. An ejected node cannot eject another node.
Cluster services software on each node
manages various failover scenarios in the cluster. There are
numerous failover scenarios and these things are worked out to the
nth degree. In outline if any failures are detected then all nodes work out what to do in a similar way. First of all to say what a quorum is. A quorum is a group of nodes in a cluster that can communicate with each other, the number of nodes in a quorum must be more than half of the total in the cluster or if exactly half must have "reserve" on the tie break partition. If I am part of a "quorum" I can continue and take part in a failover and recovery, the first part of which is to eject or fence any nodes that are not part of the quorum. This prevents the "bad" nodes from updating the shared data. If I am a "bad" node i.e. not part of a quorum I wait to regain access to the other nodes and when I regain access I must undo anything I have done locally since the problem started (tidy up). I can then rejoin the cluster.
IBM have today launched pureData, a series of workload optimized database appliances.
This includes pureData for transactions - a workload optimized database appliance for transactional or OLTP workloads. This is (you've guessed it) an expert integrated system featuring B210.1 and the pureScale feature. The box when delivered is ready to go in 4 hours to start data load for tier 1 highly available database requirements. Plug and play pureScale if you like :-) I am very happy to be one of a number of "pureData Champions" who are working with partners and clients to roll this out . I really think this has the potential to change the marketplace. Bring it on!
If you want to find out more or find a pureData champion in your area just give me a shout: email@example.com.
Just a brief look at the architecture of a pureScale cluster at a very high level. Questions welcome.
A DB2 pureScale cluster is made up of number of servers which are connected together, a shared area of disk and some software that all work together to provide a high performance and resilient database.
The cluster is made up of a number of "controllers" or Coupling facilities (CF) and a number of members.
There are normally 2 or more members. The number of members can be increased to add more processing power to the cluster.
Today is the day when DB2 10.5 FP4, known as Cancun Release has been published officially!
This DB2 Cancun Release includes many different new features and improvements in differents areas like:
The summary of the enhancements can be found here:
There are some exciting improvements and new features included on the pureScale side, which will make even easier to implement pureScale!
Some of these features are really useful to get started with pureScale like having the possibility to run pureScale using just a basic TCP/IP network or using virtual machines under KVM or VMware ESXi. This is great for who wants to explore pureScale technology just using a basic network or a virtualized environment!
But also, for actual pureScale users, two great enhancements like incremental backups and online REORG will be a huge improvement in terms of system and database maintenance and administration.
If you like me are really looking forward to try all these new features, just go and download the just released DB2 Cancun Release 10.5 FP4 at this link:
Feel free to ask any question or comment you may have on all these new and exciting features for pureScale!
CiaranDeB 2700033FRG Tags:  appliance database purescale transactional puredata workload oltp 1,568 Visits
As with all of the pureSystem family the use of patterns to automate repeatable tasks is a feature of pureData systems.
With pureData here are two types of patterns available:
1) Topology Patterns. Topology patterns will install all of the software required to run pureScale and create the pureScale instance on a number of compute nodes. You can deploy a topology pattern of 2, 4, or 6 nodes. The 2 node topology pattern consists of an instance of 2 members with a cluster caching facilities (CFs) co-located on each of two compute nodes. This is the smallest practical HA installation of Db2. The 4 nodes topology pattern consists of 2 members and 2 CFs on separate compute nodes. The 6 node topology pattern is a 4 member cluster with 2 CFs on separate compute nodes. Of course the more nodes you deploy to the higher the performance and resilience.
2) Database Patterns. A database pattern is essentially a method of storing and reusing database configuration settings. Databases patterns are used to create and configure a database within the instance topology. PureData systems will come with an IBM transaction processing database pattern. You can also "roll your own".