AcdntlPoet 2700019V2G Visits (1176)
How the Cloud Enables DevOps- Part 1 of the "Leveraging IBM SmartCloud with UrbanCode Deploy v6" series with Michael Elder
AcdntlPoet 2700019V2G Visits (894)
We're always working to bring you deeper value to the products you use. From our support perspective, this doesn't just mean troubleshooting tips or solutions to errors. It also means larger implementation content and best practices! Helping you avoid issues by highlighting best practices before trouble is seen is just another of those ways we help make sure you are as successful with these products as you need to be! That's exactly why we bring you this periodic series of roll-ups from our developerWorks Rational community and libraries... that in mind, here's the past few weeks' articles that went live on developerWorks Rational:
What's new in Rational Lifecycle Integration Adapters
What's new in Rational Software Architect and Design Manager
Top 10 modeling hints: #4 Design patterns reuse proven solutions
IBM Rational Lifecycle Integration Adapters Standard Edition extends the IBM Rational solution for Collaborative Lifecycle Management (CLM) with integrations to select third-party tools. These adapters also provide integrations for Rational ClearQuest. The Rational Lifecycle Integration Adapters Standard Edition enables you to continue using your existing lifecycle tools and benefit from the many capabilities found in the Rational solution for CLM products.
Monica Luke lives in the Boston, Massachusetts area. With more than 20 years experience in software engineering, she joined IBM Rational software 10 years ago in the test organization. During her 17 years as a test automation engineer and architect, she has repeatedly tackled the tough problems of building test automation solutions through frameworks that last and build triggered test solutions for complete lights-out testing. Testing and test automation remain a passion, and that has led Monica to move into the product management organization, where she has the opportunity to tackle these tough problems in the testing tools. Monica currently spends a lot of her time thinking about the challenges of Continuous Testing. Using an outside-in scenario design approach, Monica is happily influencing the next wave of Rational testing tools.
Visit Monica's developerWorks profile: http
Read all of Monica's developerWorks content: http
New DevOps events
The agile architect
Go agile to deliver SAP enhancements
Mobile development and continuous software delivery
IBM Rational DOORS getting started
Simplify integration testing with Rational Integration Tester
Extend IBM Rational Test Lab Manager for test asset management
Top 10 modeling hints: #5 Only 4 (+1) diagrams are required
Create custom reports with BIRT and Rational Team Concert
Create high quality code with IDEs
Top 10 modeling hints: #6 Model-based hand offs preserve fidelity
Another featured download:
IBM Rational DOORS
AcdntlPoet 2700019V2G Visits (1297)
Our Jazz.net authors have been quite productive recently writing and publishing a slew of blog posts on the topics of DevOps and Continuous Delivery. Check out a selection of posts below from the subject matter experts themselves as they discuss deep technical topics that can help you improve your own release cycles, performance, and efficiency in deployments!
DevOps Culture - Retrospectives and continuous improvement- In the Collaborative Lifecycle Management (CLM) project we have declared three imperatives for improvement in order to increase our agility with a goal of continuous delivery: culture, process, and tools. Of these three things, culture is, in my opinion, the most difficult thing to change because it’s less tangible than processes and tools and because culture is often deeply ingrained in an organization and a team. Consequently, cultural changes can take a long time to implement. This is the first in a series of posts where I’ll discuss some of the important cultural issues and changes that we’ve tackled in the CLM project.
DevOps for Dummies now available!-You have probably heard about DevOps but you want to cut through the hype and understand more about this approach. That is the genesis of DevOps for Dummies, authored by IBM’s Sanjeev Sharma. It is written to appeal to both practitioners and managers and to show you how you can apply a new DevOps approach to more rapidly deliver innovative applications and services that solve real business problems.
Rapid build deployment using IBM UrbanCode Deploy- Previously I have focused on build performance in posts like Speeding up the pipeline by slowing down builds and Rethinking personal builds, but there is a lot more to a continuous delivery pipeline than build times. Once a build produces artifacts, you need to do something with them. Often the next step is to install the product onto a machine for either testing or production use. The installation is typically a process such as copying a zip to a machine and unzipping it or running an install program, but can sometimes be more complicated when special configuration is required. Below I describe how we have started using IBM UrbanCode Deploy to allow builds to easily and automatically install, configure and invoke server applications onto machines in the cloud before an application installer has even been created.
Working towards continuous deployment in Jazz.net- I have worked for IBM for about 20 years, moving back and forth between development, customer support and IT operations roles. Working in these different roles helped give me perspective for my current role as the manager for Jazz Continuous Deployments/DevOps. In this role I am responsible for ensuring that our multiple staging and self-hosting environments are stable and always using the latest driver or sprint of the Collaborative Lifecycle Management (CLM) products. We are not yet at the point where we can automatically deploy a new driver daily to production, but we are working towards that goal.
Unify your test automation for continuous delivery- This is the second article about testing in our Continuous Delivery series to share practices we have adopted in our own development team within Rational Team Concert (RTC). The presented techniques are used to control software evolution and to improve the quality of our code base. Since there is a variety of IBM and open source tools we are using, we focus here on the practices and techniques rather than on particular tools.
CLM Continuous Deployment Pipeline: Reporting on the state of affairs-The following is the third posting in my Collaborative Lifecycle Management (CLM) Continuous Deployment series of blogs on Jazz.net. The earlier two blogs can be found at Improving throughput in the deployment pipeline and Behind the scenes of the CLM Continuous Deployment pipeline. In Behind the scenes of the CLM Continuous Deployment pipeline, I had mentioned a mechanism we have developed on the Jazz Collaborative ALM project to gather progress and status data of phases that make up our deployment and test execution pipeline. In this post, I will show you how we use the gathered data for reporting on the overall state of the pipeline and narrow down on the root causes upon its failure. Additionally, the data allows us to create trend reports that help us assess the overall quality of our builds, tests and product code over a period of time.
From ‘use what we sell’ to ‘practice what we preach’- This is part three in our blog series describing the transformation of our internal ALM development organization toward a Continuous Delivery model. In this series, we describe the motivations behind adoption of a Continuous Delivery model and the many challenges we faced as we embarked on this transformation from both the planning and execution perspectives.
Role of the run team in our Continuous Delivery process- I am one of the developers in the Rational Collaborative Lifecycle Management (CLM) project contributing to the Tracking and Planning (TAP) functionality of Rational Team Concert (RTC). I have been part of the TAP team from last four years and involved in delivering RTC in longer and shorter release cycles. You would have read posts written by my colleagues on how we changed our processes and organized our teams for adapting to the Continuous Delivery lifecycle. This blog is the continuation to these posts, in which I’ll be talking about the "Run Team" and its necessity and role in delivering quality values to our product. We have been running the Run Team from the last four releases (since 4.0.1) and I was part of the team for three releases and led the team during two releases.
Rational Team Concert source control makes continuous delivery easier- Rational Team Concert (RTC) has started releasing quarterly. Since large features rarely fit into such short cycles, we’re making heavy use of RTC’s branching and merging functionality. That could result in merge hell, but it doesn’t. This post will give you an idea of how the RTC team uses our own source control management system, and show how its design helps large teams maintain many branches without nightmarish merging.
How does Rational ‘do Continuous Delivery?’- This is part two in our blog series describing the transformation of our internal ALM development organization toward a Continuous Delivery model. In this series, we describe the motivations behind adoption of a Continuous Delivery model and the many challenges we faced as we embarked on this transformation from both the planning and execution perspectives.
Organizing our teams for Continuous Delivery- You may have been reading the blog posts of my colleagues around continuous delivery including the motivation behind it, our focus areas as we transformed from annual to quarterly releases, and some process improvements that we implemented. Continuing this theme, in this blog I’ll write about one of the most dramatic changes that we underwent as a development team to support continuous delivery - the restructuring of the team itself into a new avatar that we like to believe is more agile and more user focused than it was earlier.
AcdntlPoet 2700019V2G Visits (1438)
I'm constantly amazed at the great information our developerWorks authors produce on such a consistent basis. To prove that point, here are the latest articles from the past week that have gone live on developerWorks Rational:
Develop reliable software with DevOps
Top 10 modeling hints: #7 Requirements models help you avoid early and expensive defects
A macro-pattern for public sector systems architecture
JazzHub: Collborate in the cloud in less than 10 minutes
What's new in IBM Rational Application Developer V9.0 Portal Tools
Top 10 modeling hints: #8 Napkin models are a good way to start a conversation, but a terrible way to end one
AcdntlPoet 2700019V2G Visits (1561)
Darrel Rader, a technical skills and development leader in IBM Rational has built this amazingly short (only 6 slides!) but robust presentation on slideshare.net to help explain what learning circles are:
Now that you know what a learning circle is, did you know we've got five of them currently rolled out (with more to come)? Check out the great learning circles below, choose one, and dive in! These learning circles focus on aspects of the product and application lifecycle:
Because you may not have time to browse all the resources and mingle with other learners in one sitting, learning circles help you create your own personal roadmaps, your pathways through the resources.
You can check off items as you complete them, break away whenever you need to, and easily return anytime. No guesswork; no wasted time trying to recreate where you were.
You can keep your progress confidential, of course. But you also have the option of easily sharing your progress with a mentor, your manager, or your team so you can all progress together.
Don't forget to keep and eye on our developerWorks Learning Circles page to see when new circles are added!