Rajeshavanthi 2700022MCX Visits (1779)
From a product perspective, whenever you encounter a peculiar error or behavior it becomes difficult to think of a starting point that could help you drive towards understanding the cause. Such scenarios demand more information and to have a keen look into the log files generated by the respective application. Such logs as meant to accumulate the granular information based on the configuration or settings imposed while working on a asset under test.
The intention of designing this utility is that it would help avoiding the initial 3 - 4 interactions required by the Technical Support Engineer to collect basic system and log information. Thus reducing the resolution time cycle of the Problem Management Record.
For more information on how to execute this data collection utility, you may refer the following link:
New CLM Whitepaper: Use Rational Performance Tester to monitor Collaborative Lifecycle Management server resources
AcdntlPoet 2700019V2G Visits (1685)
Check out this new CLM whitepaper from Rational Client Support's AVP team member Dayal Sachdev!
Dayal knows that clients today face challenges scaling Jazz environments appropriately and maintaining them, and has written this whitepaper that describes one approach to monitoring a server layer and captures those results for analysis using Resource Monitoring with IBM Rational Performance Tester. The target audience is administrators whom are in charge of hosting and maintaining Jazz CLM tools today while having a moderate understanding of load testing concepts and Jazz tools.
Abstract: Using IBM Rational Performance Tester V8.5 to resource monitor an IBM Rational Collaborative Lifecycle Manager V4.0.3 server hosted on IBM WebSphere Application Server V8.5.5.
Released: September 25, 2013
Authors: Dayal Sachdev
Table of Contents:
AcdntlPoet 2700019V2G Visits (1253)
We are very pleased to announce the Open Mic replay - Rational Support Client Connect program introduction webcast page is now published! The replay video is also available with closed captions on the IBM Rational Support YouTube channel:
This is an introduction to the Rational Client Connect program from the Rational Support team. This program helps you get started with electronic support activities such as downloading software, obtaining licenses keys, finding content, and submitting service requests to support.
Sumant Renukarya 270002B42N Visits (1486)
One of the IBM Rational Team Concert (RTC) users, having an integration with Focal Point (FP) were planning to move the production database
1. Server Rename
2. Isolate the production and the test environment at network level.
I welcome any comments, suggestions on this note.
NEW OpenMic session on configuring, administering, and troubleshooting access to Rational product help
AcdntlPoet 2700019V2G Visits (1130)
The IBM Rational Client Success Team is holding an Open Mic session covering access to the Rational product Help content. This session is essential to anyone in need of web based help delivery or secured environment help content delivery alike. Add this session to your calendar today so you don't miss this important topic.
Hosted and presented by:
Overview: Rational products support web-based delivery of help which provides options for delivering product help content to users. By default, users access product help content from an IBM server hosted on the internet. If internet access is not available due to security or environmental issues, Rational product users and administrators also have options to download the help for local use or set up an intranet server to host and deliver the help content. Join us to learn more about the help delivery options, how to determine the best option for your environment, and get tips on configuring, administering, and troubleshooting Rational product help content.
For more information on these and other sessions, see the
IBM Rational Rhapsody family provides a collaborative design, development and test environment for systems engineers and software engineers. It uses Systems Modeling Language (SysML) and Unified Modeling Language (UML) to enable rapid requirements analysis and visual, model-based design.
The UML diagrams are views into the underlying semantic system model; each kind of diagram emphasizes some aspect of the model.
Example - Dynamic aspects is represented by behavior diagram - State chart.
Statecharts define the behavior of objects by specifying how they react to events or operations. The reaction can be to perform a transition between states and possibly to execute some actions. When running in animation mode, IBM Rational Rhapsody highlights the transitions between states.
The discussion covers few modeling challenges with state chart using Rational Rhapsody and how to over come those challenges:
1) Evaluation of condition connector in state chart
A scenario where a variable (count) is decremented before the condition connector and is expected to terminate if value of variable is 9 (count==9).
However, on executing you observe that the condition doesn’t take the change in the variable on the transition. Instead it takes the initial value of the variable for comparison.
The work around here is to have an additional dummy state in between to get the desired output.
2) Multicasting with rapid ports in layered structure
Currently, the multicasts of event via rapid ports (ports that have no provided/required interfaces) are supported only from a direct invocation.
Example - One sender object and two receiver objects
Consider a scenario where the event is first sent from the Class A's object(itsA) and then it reaches the Class B's object(itsB), from where it is delegated to its 2 inner parts(itsB1 and itsB2
No multicasting is available on having multi layered structure.
The Workaround is to add an additional state chart and MULITCAST_GEN() macro in class B.
3) Working of Reaction in State
In a single state for a Reactive class, you would expect to continuously print a statement after elapse time of tm (1000). However, upon execution it prints only once instead of continuous timer.
Using a tm (1000) as a trigger for a reaction in state means that 1 second after you enter the state you'll be triggered. It's not a continuous timer.
To restart the timer you have to exit the state and re-enter it. It needs a design change as below.
4) Combining Junction Connector and Condition Connector in a state chart
You would like to have several events from a state and a condition to determine the other state.
You cannot join several transitions into a condition connector neither you can have a transition from a junction connector to a condition connector.
However, you can model to add a dummy state in between that will further evaluate for condition connector.
AcdntlPoet 2700019V2G Visits (1588)
Time to slow it down a bit on this autumnal Friday morning. So sit bad, grab a cup of coffee (or tea) and take some time to read the
Maven integration with Rational Application Developer
DevOps adoption: tools, processes and culture
IBM Rational Application Developer for WebSphere Software
Webcast: Mobile DevOps - Challenges and Best Practices
AcdntlPoet 2700019V2G Visits (1474)
September has come and gone, but the important data remains! These are the top 15 technotes for Rational Team Concert that were reused during September to help solve your PMRs. Last month the following technotes were the most heavily reused when closing PMRs opened by you, our clients. We hope that highlighting them here will help others encountering the same or similar issues also find quick resolution:
AcdntlPoet 2700019V2G Visits (1432)
IBM Rational System Architect Simulator with Optimization- John Jessup of IBM Services demonstrates how to use the System Architect Simulator and Optimizer.
Selecting an enumeration value for an attribute and based on the value selected display text area in RTC?
Sumant Renukarya 270002B42N Visits (1567)
Here is an example requirement that one of my clients was looking for in IBM Rational Team Concert who asked: "Is it possible to select an enumeration value for an attribute and this in-turn based on the value selected, display text area in RTC?"