The developerWorks Connections platform will be sunset on December 31, 2019. On January 1, 2020, this blog will no longer be available. More details available on our FAQ.Blogs
Blogs
Matching:
snd45jns
X
X
| Display: |
Agent installation tar files for Linux on Power Systems (Little Endian) Community Blog
sandrajones
Tags:
itm
hdt15
snd45jns
monitoringacademy
troubleshooting
ibm-blog
ppc64le
3,999 Views
Agent installation tar files for Linux on Power Systems (Little Endian) Had an issue recently which was due to the correct code not being used. In this case it was for a ppc64le machine. The install was started but failed with the following in the logs: AX -...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
KDE1_STC_CONNECTIONLIMITREACHED on KDE_Gateway agent. Community Blog
sandrajones
Tags:
ibm
ibm-blog
monitoringacademy
snd45jns
troubleshooting
itm
kde_gateway
hdt15
4,692 Views
KDE1_STC_CONNECTIONLIMITREACHED on KDE_Gateway agent. Customer was finding that the agents were not all connecting through the KDE_gateway It was found in the agent log (for the agent that is running the KDE_gateway) the error: kdebgpc.c,43,"KDEBG_...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Oracle populate osagents command fails with ORA-06512: at line 2 Community Blog
Oracle populate osagents command fails with ORA-06512: at line 2 If your site runs the Tivoli Data Warehouse, each time you install one or more monitoring agents, you must update the warehouse's ManagedSystem table; the...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Old data at agent not inserted to warehouse partitions. Community Blog
Old data at agent not inserted to warehouse partitions. Can see both errors of: CTX_ODBCError(20) SQL0327N The row cannot be inserted into table "XXX.XXX" because it is outside the bounds of the defined data partition ranges....
from Blog: Application Performance Management
Modified on by sandrajones
|
|
TEPS API link limit on 10,000 rows returned Community Blog
TEPS API link limit on 10,000 rows returned Just a quick piece of information this time. The TEPS API interface, or ITMREST inerface as it is also known, is not designed to handle large amounts of data. It therefore has a default limit of 10,000 rows...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Uninstalling an unwanted ITM module such as 32 bit ax shared libraries or gskit Community Blog
Uninstalling an unwanted ITM module such as 32 bit ax shared libraries or gskit As discussed in previous blog about the gskit libraries, components can get out of step when there are a number of upgrade in your ITM environment. These only rarer...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Unix 6 .3.x-TIV-ITM-GSK-8.0.50.88-IJ04522 upgrade failure Community Blog
Unix 6.3.x-TIV-ITM-GSK-8.0.50.88-IJ04522 upgrade failure Had a report that the upgrade to fix patch 6.3.x-TIV-ITM-GSK-8.0.50.88-IJ04522 failed with the following messages in the itmpatch.log: TRACE Wed May 16 13:23:01 2018 (nls.cpp,142):...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
TCR install fails with CTGFI1007E error Community Blog
TCR install fails with CTGFI1007E error The error message seen is: ********** error uid="CRIMA1154E"> Error installing. </error><error uid="CTGFI1007E"> Port number should be an integer between 0 and...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
TCR authorization error CM-SYS-5003 Community Blog
TCR authorization error CM-SYS-5003 This will firstly show up as a DPR-ERR-2109 when trying to launch TCR or as CM-REQ-4159 when a report is tried to be run. This is a generic error and the cogserver.log needs to be reviewed to see what...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
WPA reports SQLSTATE=22525. Community Blog
sandrajones
Tags:
warehouse
wpa
troubleshooting
ibm-blog
itm
monitoringacademy
ibm
hdt15
snd45jns
7,347 Views
WPA reports SQLSTATE=22525. The error message in the WPA logs is: SQLException: Error for batch element #728: DB2 SQL Error: SQLCODE=-327, SQLSTATE=22525, SQLERRMC=ITMUSER.NT_Server, DRIVER=4.17.29 == 5150825...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Sending email from a z/OS agent. Community Blog
sandrajones
Tags:
itm
z/os
ibm-blog
hdt15
monitoringacademy
snd45jns
how-to
agent
ibm
3 Comments
5,029 Views
Sending email from a z/OS agent. Just a quick short note this time. Have a couple of reports of having issues sending an email from a situation that is true on a z/OS agent. In these cases a Take Action had been set to run when the...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Migrate-export command error SQLSTATE=42601 Community Blog
sandrajones
Tags:
itm
monitoringacademy
teps
snd45jns
troubleshooting
hdt15
ibm-blog
export
migrate
ibm
5,177 Views
Migrate-export command error SQLSTATE=42601 The migrate-export command can be used to take a backup of the TEPS database, and this should be done regularly. see this blog for information on that: https://www.ibm.com/developerworks/community/blogs/0...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
S&P agent or WPA showing error SQLSTATE=40001 Community Blog
sandrajones
Tags:
ibm
snd45jns
troubleshooting
ibm-blog
monitoringacademy
hdt15
warehouse
itm
5,474 Views
S&P agent or WPA showing error SQLSTATE=40001 As with a lot of the warehouse errors this can be seen on the WPA or the S&P agent. On the S&P agent it could be shown like: freddie:SY KNT 18000 NT_Processor...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Writing a situation with multiple results Community Blog
Writing a situation with multiple results The results of a situation sometimes gives more than one result. for example NT_Disk_Space_low could give back the results for more than one disk on the machine. If the situation is to fire on each...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
S&P agent reports SQLCODE=-960, SQLSTATE=57011 Community Blog
Summarization and Pruning agent reports SQLCODE=-960, SQLSTATE=57011 There have been a number of cases where partitioning has been running on the warehouse database and the following error has been seen in the S&P logs:...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
tacmd LDAP login fail after upgrade Community Blog
tacmd LDAP login fail after upgrade Came across this the other day, and it is just one to be aware of. This type of issue has been seen before but usually only on AIX (as it was in this case) , however it could happen on any machine...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
KFAOT011 Event destination <n> no longer valid for situation Community Blog
KFAOT011 Event destination <n> no longer valid for situation Messages of: KFAOT011 Event destination <n> no longer valid for situation <(situation name) > were seen in the RAS1 ms logs. These messages would only be...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Linux/Unix unmounted partition and corruption. Community Blog
Linux/Unix unmounted partition and corruption. After an unintentional unmount of the partition that TEMS was running on, the TEMS failed to restart when the partition was mounted again. There were firstly reports of lock files in...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
TCR and VMMprovider access button greyed out. Community Blog
sandrajones
Tags:
itm
troubleshooting
ibm
hdt15
monitoringacademy
snd45jns
ibm-blog
tcr
7,264 Views
TCR and VMMprovider access button greyed out. Had a recent case where the VMMprovider button in the the screens was greyed out and so could not see usrs. To check everything was set up correctly this video was reviewed and the steps...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
TCR and Active Report saving. Community Blog
sandrajones
Tags:
troubleshooting
itm
monitoringacademy
snd45jns
ibm
hdt15
ibm-blog
2 Comments
7,671 Views
TCR and Active Report saving. Working with active reports it was found that the report ran fine if run manually or the report was scheduled. This was not found to be linked to any agent type, it was any active report. However the report...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Performance issues -Part 1 Community Blog
Performance issues - Part 1 Have seen recently that there have been a number of pmrs on performance issues. Most of these are down to how the environment was configured and used, so I have put together a few blogs which I hope will...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Performance issues Part 5 TEMS Community Blog
Performance issues: TEMS This can be a HUB or an RTEMS. The issues can be reported as disconnects, hangs, crashes, even the TEPS not responding; so this is a large topic. There are some configuration steps to be aware of that can help...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Performance issues Part 4 TEPS Community Blog
Performance issues Part 4 TEPS The main performance issue reported here is the length of time it takes a workspace to render to the TEP client. Here you need to think about the number of views that are in the workspace, as the more...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
Performance issues Part 2 Situations Community Blog
Performance issues Part 2 Situations The major point here is to think about the situations that are being written and how the output is being used. It is understood that in a lot of environments different parts of the organization are...
from Blog: Application Performance Management
Modified on by sandrajones
|
|
TEPS transaction log full SQLSTATE=57011 Community Blog
TEPS transaction log full SQLSTATE=57011 Have been seeing a number of these issues recently, where the TEPS is not behaving correctly due to the database transaction log being full. The issues can vary; in some cases the TEPS does...
from Blog: Application Performance Management
Modified on by sandrajones
|
