dmmckinn 1200006SCS Visits (6089)
In a previous post (IBM IoT will soon Launch the new IBM Support Community for its offerings) we announced our move to the new Support Community for some of our On-Premise product offerings. As we move forward with our efforts to improve the support experience, we are pleased to announce that the same improvements will be coming soon to our support model for our Continuous Engineering products.
When the Continuous Engineering offerings are migrated to the new Support Community, Support Portal or Service Request will redirect you to it where you can log in using your existing IBM ID & password. For your convenience a "Get help" link has been provided at the top & bottom of the page.
You can find a list of common FAQs in the following technote:
G.G.Dexter 2700008NN4 Visits (8463)
IBM continually strives to seek new and better ways to improve the support experience we provide. With that in mind, we are pleased to announce the upcoming improvements to our support model for our On-Premise products. When these offerings are migrated to the new Support Community, Support Portal or Service Request will redirect you to it where you can log in using your existing IBM ID & password. For your convenience a "Provide Feedback" link has been provided at the top & bottom of the page.
You can find a list of common FAQs for your offerings in the following technotes:
We hope you enjoy the enhancements of this new IBM support experience and welcome your feedback.
JeffLong 270005B0Q4 Visits (8596)
IBM TRIRIGA Support does all that we can to assist our clients, however; there are processes in place to help ALL of our clients get a consistent level of help.
To help you understand our PMR and APAR process, please see the following:
A Service Request (SR) or Problem Management Report (PMR) is created to request assistance from IBM TRIRIGA Support to help with investigating a problem or to request an answer to a question regarding TRIRIGA.
Due to the complexities of the environments supported and the potential scope of work involved in problem investigation with enterprise software, it may take some time to complete an investigation and can result in a number of outcomes; such as the following SR/PMR resolutions:
With each of these outcomes, IBM TRIRIGA Support has completed their investigation and the SR/PMR has been resolved. What happens next?
When a SR/PMR is resolved as question answered, the PMR is closed and no further action is necessary.
When a SR/PMR is resolved as working as designed, the client is provided with the information needed to take advantage of IBM's Request for Enhancement (RFE) Community. Opening an RFE (Request for Enhancement) allows you to communicate directly with product management and community peers. This request will be reviewed and voted for by all of our clients and support will prioritize based on client response. A client can lobby for an enhancement by engaging other clients to vote and might even post a blog or forum post to gain visibility. Accepted RFEs will be scheduled for inclusion in future releases of TRIRIGA.
When a SR/PMR is resolved as being outside of the scope of support, it means that the assistance requested is not supported by the support agreement and will require a services engagement or support from another vendor. Examples of requests outside the scope of support may include requests for assistance in customizing reports or business logic. Unsupported requests also include support for 3rd party hardware and software products like web servers, load balancers, firewalls, network devices, and/or anything that is not developed and shipped by the IBM TRIRIGA Product team.
When a SR/PMR is resolved as a defect, a new record is created in the system of record to track the resolution of defects. This new record used for tracking the resolution of a defect is called an APAR (Authorized Program Analysis Report). Once an APAR is created, the investigation phase of the reported problem SR/PMR is complete and the SR/PMR record is closed.
At this point, it is now up to the IBM team to verify root cause and provide a fix for the reported issue. This support process is now being tracked and worked as an APAR since there is no more investigation to be done.
When TRIRIGA Support is working on an APAR, we guide our clients who are interested in the progress of the defect to subscribe to the APAR online. This allows them to receive notifications related to the APAR such as when the fix is available for download. We provide instructions on how to subscribe to the APAR online as part of the PMR closure process. No one is required to do this, but if you want notifications on the status of the fix for the defect, you must subscribe.
Why did you close my SR/PMR? I don’t have a fix for my defect yet!
There are times where, from a client’s perspective, they do not feel that they have been provided with a solution for their problem, even though an APAR has been created for the defect. This sometimes results in a client requesting that the SR/PMR remain open until a fix is received and verified. However, this is not how the IBM support process works, and here is why:
The SR/PMR investigation is complete once an APAR is created. At this point the SR/PMR is closed because we have completed the investigation requested and we have determined that the issue warrants either a code or documentation fix. At this point, the APAR process of working on resolving the defect begins.
When a fix is ready, IBM will deliver the fix in the form of a fixpack on IBM’s Fix Central download site. A notice will be sent to everyone who has subscribed to the APAR notifying them that the fix is available. If assistance with installing or working with the provided fix is needed, a new SR/PMR to request that assistance can be created. Sometimes our clients get caught up in the process, viewing it as being complex. However, following this process for SRs/PMRs and APARs remains the most effective process for us to do a better job for you and all of our clients.
The bottom line is, clients may have a difference in understanding about what a resolution looks like based on our support process. We can all agree that resolution is getting an answer to the question or problem. When we mark an SR/PMR as resolved, it’s not lost forever. We can still update it for up to 28 days and we can reference it for years. If an SR/PMR becomes an APAR, we are still working it, just through a different set of procedures.
The important thing to remember is, regardless of the type of record we use to track the work, IBM is committed to solving your issues and ensuring your implementation of TRIRIGA is successful. We look forward to supporting you!
For further edification on the IBM Tririga Support process you can also review our support procedures in the IBM Support Handbook at the following URL:
AcdntlPoet 2700019V2G Visits (8658)
AcdntlPoet 2700019V2G Visits (10746)
We are pleased to announce that the new IBM support experience is now active. Our friends in IBM Electronic Support have moved the Support Portal Next Generation from Beta to Live on Monday, January 30th.
We have simplified and refined the support site so you can quickly find the support information you need. We invite you to explore the new site and let us know what you think!
When accessing previous Support Portal pages you should be redirected to the new Support Portal Next Generation site.
If you wish to provide feedback or have a how to question please send an email to firstname.lastname@example.org OR use the Contact and Feedback module located to the middle - right side of all our portal pages.