Arun K Sriramaiah 2700076GE8 Visits (10587)
RTC upgrade from 5.0.2 to 6.0.3
HTTP Status 404 - ProxyServlet: /cqconnector/
Workaround tomcat library for CQ synchronizer 603 upgrade.
1. Before upgrading the CQ synchronizer from 5.0.2 to 6.0.3, take backup of tomcat libraries present in gateway/tomcat folder.
dmmckinn 1200006SCS Visits (10553)
What were some of the most used technotes in 2016?
We've compiled a list of the top 20 troubleshooting technotes for our Maximo, TRIRIGA and Continuous Engineering products that were most accessed on the web in 2016. We hope that highlighting these technotes here will help with your troubleshooting efforts.
Arun K Sriramaiah 2700076GE8 Visits (10386)
How to Add websites (IIS Website location) in the RTC source control using HTTP location.
When you create Web site projects, Visual Studio creates the solution files in the Projects location specified under Tool
You have two options here, one to create a solution first and then create a web site project under it as described in Work
or, just share the project instead of sharing the solution. Refer to "Solution outside the sandbox" section in Flex
** Solution for adding local IIS websites into RTC source control** Find the steps below.
If you want to share your .sln file:
1. Create a virtual directory in IIS that points to a physical location in your sandbox, say <sandbox>\WebSite1
2. Create a blank solution with the name WebSite1 at <sandbox>. This will create <san
3. Add a new WebSite to the solution created in the previous step and choose http
4. You'll see a "Web Site Already Exists" dialog. Choose "Create a new Web site in the existing location"
5. Right-click on the solution in the Solution Explorer and Share in Jazz
If you prefer not to check-in the .sln file, skip step 2 and in step 5,right click on the Web site in solution explorer and Share in Jazz..
AcdntlPoet 2700019V2G Visits (10384)
Rational Quality Manager: Best Practices Part 1 - In this video you will learn how to use Rational Quality Manager effectively to manage the testing process. The first part of the video covers: - Test Planning and Construction - Test Plan - Test Case - Test Suite - Test Script [Watch the video here!]
Rational Quality Manager: Best Practices Part 2 - In this video you will learn how to use Rational Quality Manager effectively to manage the testing process. The second part of this video covers: - Test Execution - Administration [Watch the video here!]
Romain_Barth 2700076HKB Visits (10317)
There is a documented procedure to install the DOORS client in silent mode and when you install a new DOORS client the old one is automatically uninstalled.
But, since the release 9.6.1, DOORS client is only a 64 bit application. That means if you have a DOORS client 32 bit installed, installing a new DOORS client 64 bit won't uninstall automatically the old release. This is a problem when you want to install DOORS in silent mode as having a DOORS client 32 bit and 64 bit installed on the same machine is unsupported by IBM.
To uninstall DOORS client 32 bit in silent mode, you need first to find the GUID of your release. To find the GUID, you can use WMIC, here is a sample script (.bat) to retrieve that information:
In this example, I am trying to find the GUID of a DOORS 9.5 client.
Once you get the GUID, you can use this command to uninstall your DOORS client:
AcdntlPoet 2700019V2G Visits (10285)
How to index DOORS 9.6 artifacts in Lifecycle Query Engine - John Carolan demonstrates the steps required to enable DOORS 9.6 as a Tracked Resource Set (TRS) provider and how to add that feed to Lifecycle Query Engine (LQE) as a new Data Source.
AcdntlPoet 2700019V2G Visits (10156)
What’s new in Team Concert Jenkins plug-in 126.96.36.199 - We are pleased to announce that Team Concert Jenkins plug-in 188.8.131.52 is here! The Team Concert Jenkins plug-in integrates Jenkins with Rational Team Concert’s (RTC) SCM and Build capabilities using the richer features of the build toolkit. It provides options to configure Jenkins jobs to use RTC source control. Jenkins jobs can also be configured to use the source control options specified in an RTC build definition, facilitating Jenkins builds to be managed from RTC and take advantage of the traceability provided across RTC work items, builds, and change sets. The plug-in also publishes the changelog information in the Jenkins builds and supports polling....
An overview of the different build configurations supported by the Team Concert Jenkins plug-in - Using the Team Concert Jenkins plug-in, you can configure your Jenkins jobs to use Rational Team Concert (RTC) source control and, optionally, report information back to Rational Team Concert builds. The plug-in integrates Jenkins with RTC using the richer features of the build toolkit. This plug-in is different from the other Rational Team Concert plug-in for Jenkins which uses SCM CLI to integrate with RTC. This article provides an overview of the different build configurations supported by the Team Concert Jenkins plug-in 184.108.40.206. For instructions on how to setup and configure the plug-in, refer to Team Concert Jenkins plug-in wiki....
Loading symbolic links correctly when using the Rational Team Concert/Jenkins integration - When using the Jenkins plugin to load files from Jazz SCM it is possible that the symbolic links in the Jazz streams will not be loaded correctly. The problem is that the default Java runtime for Jenkins will not know how to deal with the symbolic links. It is necessary to manually include the .dll/.so files into the Jenkins library path so the symbolic links will load correctly. This article will detail how to setup Jenkins to get the symbolic links to load correctly....
Note: This post and related articles describes a usage or software configuration that is not supported by IBM.
AcdntlPoet 2700019V2G Visits (9915)
The Introduction to Configuration Management with IBM CLM video series on developerWorks is a great beginning to working with the various CLM components and features to improve your engineering streams and manage change:
Introduction to Configuration Management with IBM CLM: CLM global configuration - The video builds on the concept of a lifecycle project in IBM's solution for Collaborative Lifecycle Management (CLM) by introducing concepts and terminology introduced in version 6.0 of the IBM Jazz applications. These concepts include baselines, steams, configurations, global configurations, components and other. These capabilities are useful when reusing requirements or components in product variants, in product line engineering, and in everyday project development.
Introduction to Configuration Management with IBM CLM: What is Product Line Engineering? - IBM Rational offers solutions to support each phase of the product line engineering (PLE) lifecycle. PLE is a methodology that lets you deliver and evolve entire product lines more efficiently.
Introduction to Configuration Management with IBM CLM: Managing Requirement Changes with DOORS Next Generation - In this short demonstration you will see how changes to requirements can be made in an isolated stream, captured in change sets and linked with work items and then shared and delivered for reuse in other streams.
Introduction to Configuration Management with IBM CLM: IBM Rational DOORS Next Generation: Working with baselines - In this video we learn how to work with baselines in IBM Rational DOORS Next Generation V6.0.
Introduction to Configuration Management with IBM CLM: Effectively Manage Changes, Baselines and Engineering streams - In this short demonstration you will see how global configurations can be used to help you effectively manage changes across the engineering lifecycle. We will start off by examining a new defect that has recently been submitted against an Automated Meter Reader system. This system helps automate collection of water usage in residential and commercial buildings. The project planning and change management component of the IBM Continuous Engineering Solution allow us to coordinate amongst team members using releases and work items. Work items are typically small chunks of work carried out by team members on a project and can represent tasks like enhancements, defects and system change requests.
Introduction to Configuration Management with IBM CLM: Effectively Manage and Reuse Components - In this short demonstration you will see how global configurations can be used to help you effectively manage, organize and reuse components that contain artifacts across the development lifecycle.
AcdntlPoet 2700019V2G Visits (9881)
Rational Team Concert 6.0.3 - Web interface for importing work items: This video demonstrates the web user interface for the work item importer.
You may also want to watch:
AcdntlPoet 2700019V2G Visits (9791)
Rational DOORS Next Generation now lets you create client extensions. Extensions are complete web applications that run inside a dedicated area of the DOORS user interface, allowing users to embed custom web content. IBM Bluemix provides a powerful and easy-to-use platform for hosting web applications and extensions.
Integrate Rational DOORS Next Generation and Evernote, Part 2 - In this tutorial, the second of three parts, see how to build a web front end using the Express JS framework, and how to allow users to authenticate to the popular note-taking software Evernote using OAuth instead of using a single developer token.
Integrate Rational DOORS Next Generation and Evernote, Part 3 - In this tutorial, the last of three parts, see how to build a web front end using the Express JS framework, and how to allow users to authenticate to the popular note-taking software Evernote using OAuth instead of using a single developer token.
In this 3-part series, you've seen how to build an integration with Evernote. We started with the API and moved on to building a standalone Node.js web application that allows users to browse their Evernote data. Then you saw how to adapt this web app into a DOORS Next Generation extension. I hope that this example has given you a taste of what can be achieved with DOORS Next client extensions and a sense of how easy it is to build and deploy your own extensions using Bluemix.
Free trial: Try Rational DOORS Next Generation free for 90 days. Let this platform for global team collaboration help you manage requirements more effectively and share common administration of users, servers, and projects.
AcdntlPoet 2700019V2G Visits (9693)
Better product design with CE4IoT and IoT analytics - Why Continuous Engineering for the IoT? by Daniel Moul
AcdntlPoet 2700019V2G Visits (9687)
5 minutes of smart: Tracing project requirements - By using an automated tool to facilitate tracing project requirements (in this case, Rational DOORS Next Generation), you can take charge and make managing project requirements a smooth, continuous process.
5 minutes of smart: How to link requirements to development artifacts - An important initial task to successfully manage requirements in a development project includes linking requirements and artifacts. Choosing the correct link type is key. Learn about links types in a typical RM tool such as Rational DOORS Next Generation. You can also experiment with the DOORSng tool in a 60-day free trial.
You can expand your tracing skills for free. IBM Rational DOORS Next Generation, the automated requirements management platform, makes following the links between a requirement and its origins, a requirement and other requirements, or a requirements and other artifacts, much easier. As an experiment, sign up for the fully functional 60-day free trial of DOORS Next Generation and re-manage a project you've already finished for comparison, create a new sample project to manage, or start building requirements management for a project you're about to begin for a client.
AcdntlPoet 2700019V2G Visits (9631)
AcdntlPoet 2700019V2G Visits (9575)
The goal of this article series is to serve as a helpful collection of "developer's cheat sheets." Some of the operations outlined are ones you might use infrequently. While others, you'll use often enough for them to become second nature to your normal development routines.
Rational Team Concert essentials: A developer's perspective, Part 1: Joining a new team project - In Part 1 of this series, learn how to join a team project, create a workspace to contribute to your project, and load existing artifacts from your team’s project components.
Rational Team Concert essentials: A developer's perspective, Part 2: Delivering work contributions - Learn how to use Rational Team Concert to identify your project development commitments, carry out your development activities in a team environment, and deliver your work to your team project.
Romain_Barth 2700076HKB Visits (9574)
By using DXL, however, you can do this task quickly. Here is a sample of code to help you perform it: